• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.279-286
• /
• 2017

This review paper evaluates different kinds of synthesis methods for calcite precipitated calcium carbonates by using different materials. The various processing routes of calcite with different compositions are reported and the possible optimum conditions required to synthesize a desired particle sizes of calcite are predicted. This paper mainly focuses on that the calcite morphology and size of the particles by carbonation process using loop reactors. In this regard, we have investigated various parameters such as $CO_2$ flow rate, Ca $(OH)_2$ concentration, temperature, pH effect, reaction time and loop reactor mechanism with orifice diameter. The research results illustrate the formation of well-defined and pure calcite crystals with controlled crystal growth and particle size, without additives or organic solvents. The crystal growth and particle size can be controlled, and smaller sizes are obtained by decreasing the Ca $(OH)_2$ concentration and increasing the $CO_2$ flow rate at lower temperatures with suitable pH. The crystal structure of obtained calcite was characterized by using X-ray diffraction method and the morphology by scanning electron microscope (SEM). The result of x-ray diffraction recognized that the calcite phase of calcium carbonate was the dominating crystalline structure.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.107-114
• /
• 2014

In the present work, we report a novel microstructure of scalenohedral calcite synthesized without any additives by a simple and ecofriendly carbonation process carried out in a liquid-gas system as well as the effects of experimental conditions on the crystal growth of the scalenohedral calcite phase. Various process parameters, pH, temperature, $Ca(OH)_2$ concentration, $CO_2$ flow rates, and the total volume concentration, were investigated to enhance the sensitivity of the process. The highest average length of the scalenohedral calcite was obtained at pH 6.0, temperature of $45^{\circ}C$, $Ca(OH)_2$ concentration of 0.2M, $CO_2$ flow rate of 80mL/min, and total volume of 1L. The synthesized calcite was characterized by XRD, SEM, and FTIR to identify the phases and surface morphology.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.889-892
• /
• 2004

Acicular type aragonite precipitated calcium carbonate was synthesized by carbonation reaction of $Ca(OH)_2$ slurry and $CO_2$ gas. As increasing the initial concentration of $Mg^{2+}$ ion, calcite crystal phase substantially decreased while that of aragonite crystal phase increased. According to XRD and EDS analysis, it was found that the addition of $MgCl_2$ induced the $Mg^{2+}$ ion to substitute in $Ca^{2+}$ ion site of calcite lattice then the unstabled calcite structure be resolved, consequently the growth of calcite structure is interrupted while the growth of aragonite structure is expedited.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.654-657
• /
• 2003

We obtained amorphous calcium carbonate through the carbonation reaction of $Ca(OH)_2$, and through this reaction, observed changes in particle shape and phase by electric conductivity, XRD and TEM analysis. According to the result of the analysis, in the first declining stage of electric conductivity, amorphous calcium carbonate that has formed is coated on the surface of $Ca(OH)_2$ and obstructs its dissolution, and in the first recovery stage of electric conductivity, amorphous calcium carbonate is dissolved and re-precipitated and forms chains of fine calcite particles linearly joined. In the second decline of conductivity, viscosity increases due to the growth of chains of calcite particles, and finally the calcite particles are dissolved and separated into colloidal crystalline calcite, thereby increasing electric conductivity again.

• 광물과 암석
• /
• 제33권4호
• /
• pp.439-450
• /
• 2020

온실가스의 대기 방출에 기인된 지구온난화는 범세계적인 주요 문제로 다루어지고 있으며, 이에 대한 많은 대책 중의 하나로 광물탄산화가 관심을 받고 있다. 본 연구에서는 다양한 조건에서 경량 기포콘크리트를 이용한 광물탄산화 실험을 수행하여 이들의 탄산화 재료로써의 가능성을 파악코자 하였다. 경량 기포콘크리트는 광물탄산화의 주요성분인 CaO의 함량이 약 27 wt.%에 달하여 탄산화를 위한 유망한 재료로 간주할 수 있다. 이 함량 모두가 광물탄산화에 참여한다는 가정 하에 계산된 CaCO3 함량은 약 40 wt.%이다. 경량 기포콘크리트로부터 광물탄산화 반응의 최적 조건은 단일상의 방해석이 형성된 고액비 0.01, 반응시간 180분이며, 그리고 단일상 여부와 무관하게 즉 방해석과 바테라이트가 공존하는 경우, 고액비 0.06, 반응시간 180분인 것으로 확인된다. 고액비 0.06이상인 경우, 방해석과 더불어 바테라이트가 공존하였으며, 이는 광물탄산화에 따라 초기에 형성된 바테라이트가 점차 방해석으로 상전이 된 데 반하여 후기에 형성된 바테라이트는 반응 종료 시까지 방해석으로 상전이 되지 못한데 원인이 있는 것으로 해석된다.

• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.175-180
• /
• 1995

석탄회의 성상 해명의 일환으로서, 석회석의 열처리 조건과 광물조성의 관계를 검토했다. 석탄회의 주 광물조성은 mullite, quartz 및 유리상(약 20 ~ 25wt%)이었으며, $1000^{\circ}C $ 까지는 거의 변화가 없었다. 안산의 석탄회 중에는 calcite가 함유되었으며, $1200^{\circ}C $ 에서 calcite 분해로부터 온 CaO, quartz 및 유리상 중의$Al_2O_3$가 반응하여 anorthite($CaO{\cdot}Al_2O_3{\cdot}2SiO_2$)로 바뀌는 것을 알 수 있었다.

• 한국광물학회지
• /
• 제27권3호
• /
• pp.135-147
• /
• 2014

당두광상에서 산출되는 스카른 광물 및 섬아연석에 대한 분광분석을 실시하고 XRD 분석 및 편광현미경 관찰을 통해 휴대용 분광계를 이용한 스카른 광상 광물자원탐사에 있어서 효율성에 대해 고찰하였다. 그 결과, 단사휘석(회철휘석, 투휘석, 보통휘석), 석류석(회철석류석, 회반석류석), 녹렴석, 방해석, 녹니석 및 섬아연석이 산출됨을 확인하였으며, 단사휘석, 석류석, 녹렴석, 섬아연석의 경우 해당 광물의 단일표준분광정보와 매우 일치하는 반면, 녹니석은 방해석 및 단사휘석과 혼합된 형태의 분광특성이 나타난다. 분광특성분석과 XRD 분석 및 현미경관찰을 통한 교차검증 결과, 단사휘석, 석류석, 녹렴석의 경우 80% 이상의 일치성을 보인 반면, 섬아연석, 녹니석, 방해석의 경우 50% 이하의 일치성을 보인다. 따라서 휴대용 분광계를 이용한 스카른 광상 탐사 시 단사휘석, 석류석, 녹렴석의 정보제공에 효과적인 반면, 섬아연석, 녹니석, 방해석의 경우 부수적인 자료로 활용하는 것이 적절할 것으로 생각된다. 녹니석이나 방해석의 경우 효과적인 탐지를 위해서는 충분한 함량이 뒷받침되어야 할 것이다.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.327-335
• /
• 2002

Experiments were conducted to investigate the synthesis characteristics of Precipitated Calcium Carbonate(for short PCC) in Ca(OH)$_2-CO_2-H_2O$ system by the continuous drop method of Ca(OH)$_2$ slurry into the solution containing $CO_2$(aq). When the flow rate of $CO_2$(g) increases and the concentration of Ca(OH)$_2$ slurry become low, the absorption rate of $CO_2$(g) become faster than the dissolution rate of Ca(OH)$_2$. Consequently, the growth of the calcite crystal plane is facilitated resulting in synthesis of $1.0{\mu}m$ of rhombohedral calcite. On the other hand, when the flow rate of $CO_2$(g) decreases and the concentration of Ca(OH)$_2-CO_2-H_2O$ slurry become high, new nuclei is created along with the crystal growth resulting in synthesis of $0.1{\mu}m$ of prismatic calcite. Maintaining 1.0wt% of Ca(OH)$_2-CO_2-H_2O$ slurry, 120 drops/min of drop rate and $25^{circ}C$ of temperature, the shape of PCC shows colloidal and spherical agglomerate at 100 mL/min of the flow rate of $CO_2$(g); the mixture of rhombohedral and plate-shaped calcite, at 200∼500 mL/min. Therefore, as the flow rate of $CO_2$(g) increases, the shape of PCC changes from colloidal and rhombohedral calcite to plate-shaped calcite. Maintaining 500 mL/min of the flow rate of $CO_2$(g), 120 drops/min of the drop rate of Ca(OH)$_2$ slurry, and $25^{circ}C$ of temperature, the shape of PCC shows the plate-shaped calcite at 1.0∼3.0 wt% of Ca(OH)$_2$ slurry; the hexagonal plate-shape calcite of the thickness of $0.1{\mu}m$ and the width of $1.0{\mu}m$, at 4.0 wt%.

• 대한한의학방제학회지
• /
• 제11권1호
• /
• pp.171-195
• /
• 2003

Objectives: This experimental study has been done to compare the Os Draconis composition before and after using processing method. Os Draconis has a quality for calming the liver meridian function and relaxation the mind. Methods: I studied the Os Draconis and processed Os Draconis by vinegar to compare the compositions and its' character. Results: Os Draconis is not a dinosaur's bone fossil but a mammal's bone fossil which has a Calcite mineral, an Apatite mineral, $SiO_2\;Al_2$ O, etc. Os Draconis contains a main ingredients CaO>50.00%. Processed Os Draconis which is heated and soaked in vinegar changes to weak condition Conclusion: Os Draconis is supposed to be a mammal's bone fossil. Some Os Draconis has a radioactive substance like a U, Th so we pay heed to deal with it in a medical clinic.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.407-411
• /
• 2009

Reflection properties, such as specular reflection and diffuse reflection, are very important optical properties for the reflector, which has high reflectance in the display and architecture industry. Calcite is lowcost, nontoxic, and stable over a wide temperature range. Therefore, it is one of the most widely using fillers in many industries and has some advantages over titania as a filler to improve reflectance. However, optical properties, especially those of ceramic-filled composites, have not been analyzed. We studied the reflectance of calcite composites with their surface roughness. The reflectance of the composites was determined using a UV-visible spectrometer. The surface morphology and the micro-structure of the composites were investigated by atomic force microscope. The reflectance of the composites was improved by increasing the content of calcite in the calcite-frit composite. The reflectance is related with the surface roughness in the composites. However, the reflectance depends on the calcite contents in materials with similar surface roughness.