• 한국해안·해양공학회논문집
• /
• 제29권1호
• /
• pp.1-11
• /
• 2017

전응력 및 유효응력기반으로 케이슨식 안벽과 잔교식 안벽의 지진위험도 해석을 수행하였다. 유효응력효과를 고려하기 위해 지반의 간극수압을 분포시켰으며, Byrne(1991)이 제안한 간편식을 이용하여 매개변수를 산정하고 이를 Finn 모델에 적용하였다. 전응력 및 유효응력 해석기법에 따른 지진위험도 결과를 통해 연약지반에 설치된 안벽의 내진설계 시 유효응력해석의 필요성을 확인하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제17권1호
• /
• pp.211-215
• /
• 1984

Forty one male workers employed in an underwater construction field were surveyed in the viewpoints of epidemiological analysis of decompression sickness (caisson's disease). Nineteen out of the entire forty one workers have been, or had been suffering from decompression sickness (as 46.3% of incidence rate) after decompression. The results obtained were as follows: 1. There was a significant relation between duration of work and incidence of disease. 2. Type II (severe type) comprised majority of cases (16 cases, 84.2%) despite any significant correlations were not present between severity types and recompression times. 3. Most frequently cited symptoms were lower limb pain (89.5%), upper limb pain (79.0%), pruritus (68.4%) and so on, however, 10% of patients complained of neurological symptoms. 4. There were not any significant correlations between disease incidence and worker's age or relative body weight.

• 어항어장
• /
• 통권2호
• /
• pp.86-127
• /
• 1988

버트리스 푸팅 케슨(Buttress footing caisson) 및 상형 푸팅 케슨의 역학특성을 해명하고 구조설계법을 검토할 목적으로 재하실험을 실시했다. 재하실험에는 배근의 제약등을 고려해서 실구조물의 1/4정도의 대형모형공시체를 사용해서 푸팅부를 중심으로 해석하기위해 푸팅에 선분포하중을 재하했다. 유한요소법에 따른 선형구조해석을 실시하여 변위, 단면력과 한계상황설계법에서의 산정식에서 얻어진 단면내력과를 비교하여 동설계법의 케슨구조물에 대한 적용성에 관하여 고찰했다. 이 보고로써 얻어진 주요한 결론은 아래와 같다. (1) 재하실험에 의하면 버트리스 푸팅공시체의 파괴형식은 버트리스부의 철근에 연한 부착할열파괴였다. 또 상형푸팅공시체에서는 푸팅부의 내면전단파괴였다. 양구조물을 설계할 때는 종래의 면외력만의 검토뿐아니라 면내력도 적절히 평가할 필요가 있다. (2) 양공시체 함께 푸팅 케슨본체와의 접합부 및 푸팅과 상자옆쪽의 벽과의 접합부에 변형이 일어나 종래의 판구조설계에서 가정하고 있는 판주변의 고정조건이 만족되지 않았다. 따라서 케슨구조물의 구조해석에서 구조전체계를 취급할 필요가 있고 부재단위에서는 단면력을 과대 또는 과소로 산정할 우려가 있다. (3) 철근강복시정도까지는 구조전체계를 모델화한 유한요소법에 의한 선형구조해석결과와 실험결과가 잘 일치했다. (4) 한계상태설계법에서의 굽음내력, 전단내력 및 구열폭의 산정식은 실험결과와 비교해서 어느쪽이나 안전측의 치를 부여했다.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.47-56
• /
• 2000

Once a structure fabricated with mass concrete is in a form of wall such as retaining wall, side walls of a concrete caisson and so on, cracks induced by hydration heat have been known to be governed by exterior restraints which are mainly related to the boundary conditions of the structure. However, it is thought that the degree of restraints can be alleviated considerably only if a lift height of concrete placement or a panel size of the wall is selected properly before construction. As a way of minimizing thermal cracking commonly observed in massive wall-typed structure, this study aimed at evaluating effects of geometrical configuration on the temperature rise and thermal stress through parametric study. Evaluation of the effect was also performed for cement types using anti-sulphate cement, blast furnace slag cement and cement blended with two mineral admixture and one ordinary Portland Cement. so called ternary blended cement. As a result of analytical study, it was found that a lift height of concrete placement is the most important factor in controlling thermal cracking in massive wall, and the increase of a lift height is not always positive to the crack occurrence as not expected.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.22-29
• /
• 2008

Clean and renewable energy technologies using ocean energy give us non-polluting alternatives to fossil and nuclear-fueled power plants to meet establishment of countermeasures against the global warming and growing demand for electrical energy. Among the ocean energy resources, wave power takes a growing interest because of its enormous amount of potential energy in the world. Therefore, various types of wave power conversion system to capture the energy of ocean waves have been developed. However, suitable turbine type is not normalized yet because of relatively low efficiency of the turbine systems. The purpose of this study is to investigate the internal flow and performance characteristics of a cross-flow type hydro turbine, which will be built in a caisson for wave power generation. Numerical simulation using a commercial CFD code is conducted to clarify the effects of the turbine rotation speed and flow rate variation on the turbine characteristics. The results show that the output power of the cross-flow type hydro turbine with symmetric nozzle shape is obtained mainly from Stage 2. Turbine inlet configuration should be designed to obtain large amount of flow rate because the static pressure and absolute tangential velocity are influenced considerably by inlet flow rate.

• Smart Structures and Systems
• /
• 제23권5호
• /
• pp.405-420
• /
• 2019

In this study, vibration characteristics of offshore wind turbine tower (WTT) with gravity-based foundation (GBF) are identified from dynamic responses under wave-induced excitations. The following approaches are implemented to achieve the objective. Firstly, the operational modal analysis methods such as frequency domain decomposition (FDD) and stochastic subspace identification (SSI) are selected to estimate modal parameters from output-only dynamic responses. Secondly, a GBF WTT model composed of superstructure, substructure and foundation is simulated as a case study by using a structural analysis program, MIDAS FEA. Thirdly, wave pressures acting on the WTT structure are established by nonlinear regular waves which are simulated from a computational fluid software, Flow 3D. Wave-induced acceleration responses of the target structure are analyzed by applying the simulated wave pressures to the GBF WTT model. Finally, modal parameters such as natural frequencies and mode shapes are estimated from the output-only acceleration responses and compared with the results from free vibration analysis. The effect of wave height and period on modal parameter extraction is also investigated for the mode identification of the GBF WTT.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.5-16
• /
• 2008

국내현장에서 수집된 9개소 안벽구조물의 측방이동 실측자료에 대한 분석을 통해 연약지반상 안벽의 측방이동을 평가할 수 있는 방안을 제안한다. 잔교식 안벽 등과 같이 말뚝이 시공되어 있는 호안 안벽구조물의 측방이동 가능성을 효과적으로 판정하기 위해서는 말뚝의 사면안정 기여효과를 반영한 사면안정해석을 수행해야 하며, 측방이동을 방지하기 위해서는 말뚝의 사면안정효과 고려시 최소 1.6 이상의 사면안전율을 확보하여야 한다. 한편, 케이슨식 안벽과 같이 말뚝이 시공되지 않은 연약지반상 호안구조물의 안정을 위한 소요 사면안전율은 1.3 이상으로 규정하는 것이 바람직하다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.418-428
• /
• 2017

In offshore area, newly deposited Quaternary loose seabed soils are widely distributed. There are a great number of offshore structures has been built on them in the past, or will be built on them in the future due to the fact that there would be no very dense seabed soil foundation could be chosen at planed sites sometimes. However, loosely deposited seabed foundation would bring great risk to the service ability of offshore structures after construction. Currently, the understanding on wave-induced liquefaction mechanism in loose seabed foundation has been greatly improved; however, the recognition on the consolidation characteristics and settlement estimation of loose seabed foundation under offshore structures is still limited. In this study, taking a semi-coupled numerical model FSSI-CAS 2D as the tool, the consolidation and settlement of loosely deposited sandy seabed foundation under an offshore breakwater is investigated. The advanced soil constitutive model Pastor-Zienkiewics Mark III (PZIII) is used to describe the quasi-static behavior of loose sandy seabed soil. The computational results show that PZIII model is capable of being used for settlement estimation problem of loosely deposited sandy seabed foundation. For loose sandy seabed foundation, elastic deformation is the dominant component in consolidation process. It is suggested that general elastic model is acceptable for subsidence estimation of offshore structures on loose seabed foundation; however, Young's modulus E must be dependent on the confining effective stress, rather than a constant in computation.

• 한국해양공학회지
• /
• 제26권4호
• /
• pp.37-41
• /
• 2012

Due to global warming, the need to secure alternative resources has become more important nationally. Because of the very strong current on the west coast, with a tidal range of up to 10 m, there are many suitable sites for the application of TCP (tidal current power) in Korea. In the southwest region, a strong current is created in the narrow channels between the numerous islands. A rotor is an essential component that can convert tidal current energy into rotational energy to generate electricity. The design optimization of a rotor is very important to maximize the power production. The performance of a rotor can be determined using various parameters, including the number of blades, shape, sectional size, diameter, etc. There are many offshore jetties and piers with high current velocities. Thus, a VAT (vertical axis turbine) system, which can generate power regardless of flow direction changes, could be effectively applied to cylindrical structures. A VAT system could give an advantage to a caisson-type breakwater because it allows water to circulate well. This paper introduces a multi-layer vertical axis tidal current power system. A Savonius turbine was designed, and a performance analysis was carried out using CFD. A physical model was also demonstrated in CWC, and the results are compared with CFD.

• 한국해안해양공학회지
• /
• 제17권1호
• /
• pp.32-40
• /
• 2005

방파제 구조물에 대한 기존의 내진설계 및 내진성능검토에서는 주로 설계지진에 대하여 구조물의 변위 및 응력을 검토함으로써 지진 안전성을 평가한다. 그러나 이러한 검토가 주로 결정론적 접근방법에 의한 것으로 지진의 가장 큰 특성이라 할 수 있는 불확실성을 제대로 반영하기 어렵다. 본 연구에서는 지진발생과 지반계수의 화률론적 분포 특성을 고려한 확률론적 지진위험도 평가에 대해 연구하였다. 우선 항만구조물의 지진에 대한 구조적 취약성을 다수의 지진자료를 이용하여 평가하였고, 지진재해지도를 이용하여 해당 지역에서의 지진재해도를 산정하였으며, 이들을 조합함으로써 방파제 구조물의 확률론적 지진위험도를 평가하였다.