• 제목/요약/키워드: Cad Program

검색결과 622건 처리시간 0.029초

Utilization of Thematic Mappers Data for the Comparison of Methods to Create Watersheds

  • Chang, Eun-Mi;Park, Kyeong;Kim, Young-Soo;Lee, Bok-Ho
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.343-348
    • /
    • 1999
  • Delineation of watersheds is one of the most basic steps for water resource management and National Park management. The purpose of this study is to investigate how to utilize Thematic Mappers scenes to compare watersheds created by running a model with those produced by digitizing topographic maps of Keum River basin. A methodology is designed and tested using Geographic Information Systems (GIS) and remote sensing to map areas with various thematic maps. A CAD data on watersheds from the Decision Support system for Water Quality is converted into GIS format. The digital elevation model with 100-meter resolution is used to create watershed by cumulative watershed method. TM scenes are also classified by new procedures including stacking method, NDVI, NDWI, and unsupervised classification methods. To evaluate the relative correctness Kyerongsan National Park was studied intensively whose area was divided into 6 watersheds in both cases. The boundaries of watershed from the model are less correct than those of the topographic maps. This result shows that automated watershed creating system needs higher-resolution digital elevation model than 100-meters.

  • PDF

헬리컬 기어계의 동적 전달오차의 예측 (The Prediction of the Dynamic Transmission Error for the Helical Gear System)

  • 박찬일;조도현
    • 대한기계학회논문집A
    • /
    • 제28권9호
    • /
    • pp.1359-1367
    • /
    • 2004
  • The purpose of this study is to predict the dynamic transmission error of the helical gear system. To do so, the equations of motion in the helical gear system which consists of motor, coupling, gear, torque sensor, and brake are derived. As the input parameters, the mass moment of inertia by a 3D CAD software and the equivalent stiffness of the bearings and shaft are calculated and the coupling stiffness is measured. The static transmission error as an excitation is calculated by in-house program. Dynamic transmission error is predicted by solving the equations of motion. Mode shape, the dynamic mesh force and the bearing force are also calculated. In this analysis, the relationship between the dynamic mesh force and the bearing force and mode shape behavior in gear mesh are checked. As a result, the magnitude of mesh force is highly related with the gear mesh behavior in mode shape. The finite element analysis is conducted to find out the natural frequency of gear system. The natural frequencies by finite element analysis have a good agreement with the results by equation of motion. Finally, dynamic transmission error is measured by the specially designed experiment and the results by equation of motion are validated.

슬라이드 방식을 이용한 스크류/볼트 피더기 개발 (Development of A Feeding Device for Screw/Bolt Using the Sliding Method)

  • 김용석;정찬세;양순용
    • 한국생산제조학회지
    • /
    • 제20권4호
    • /
    • pp.502-508
    • /
    • 2011
  • In this paper, we proposed vertical feeding mechanism for a slide parts feeder using the slide type method. This parts feeder of the slide type method have been proposed to suppress the dust generation from the feeding objects. The proposed parts feeder mechanism is composed with the casing hopper, the vertical feeding unit, the in-line feeder and linear shooter unit. And, these mechanisms did modularity through optimum design by means of mechanical and dynamical analysis using the RecurDyn(multi-body dynamics) analysis module. Also were carried out the virtual prototype using the 3-D CAD program. And it had been manufactured as the prototype of the slide parts feeder. The field test for validation of performance was performed directly at the inspection line of bolt and screw. In the field test, this slide parts feeder showed an efficiency of about 1.2 times the bowl feeder. It also showed an epoch reduction in the dust generation compared to the vibration bowl feeder. So this slide parts feeder will be applied useful in the vision inspection system for a screw and bolt.

상대속도를 이용한 바렐 캠의 설계에 관한 연구 (A Study on Design of Barrel Cam Using Relative Velocity)

  • 신중호;김성원;강동우;윤호업
    • 한국정밀공학회지
    • /
    • 제19권8호
    • /
    • pp.47-54
    • /
    • 2002
  • A barrel cam is used as a very important part of an index drive unit. The index drive unit must have an intermittent-rotational motion. The barrel typed cam and roller gear mechanism has the advantages of high reliability to perform a prescribed motion of a follower. This paper proposes a new method for the shape design of the barrel cam and also a CAD program is developed by using the proposed method. As defined in this paper, the relative velocity method for the shape design calculates the relative velocity of the follower versus cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematic constraints, where the direction of the relative velocity must be parallel to a common tangential line at the contact point of two independent bodies, i.e. the cam and the follower Then, the shape of the cam is defined by the coordinate transformation of the trace of the contact points. This paper presents two examples for the shape design of the barrel cam in order to prove the accuracy of the proposed methods.

Investigation of the effect of weak-story on earthquake behavior and rough construction costs of RC buildings

  • Gursoy, Senol;Oz, Ramazan;Bas, Selcuk
    • Computers and Concrete
    • /
    • 제16권1호
    • /
    • pp.141-161
    • /
    • 2015
  • A significant portion of residential areas of Turkey is located in active earthquake zones. In Turkey occurred major earthquakes in last twenty years, such as Erzincan (1992), Kocaeli and $D{\ddot{u}}zce$ (1999), $Bing{\ddot{o}}l$ (2003), Van (2011). These earthquakes have demonstrated that reinforced concrete (RC) buildings having horizontal and vertical irregularities are significantly damaged, which in turn most of them are collapsed. Architectural design and arrangement of load-bearing system have important effect on RC building since architectural design criteria in design process provide opportunity to make this type of buildings safer and economical under earthquake loads. This study aims to investigate comparatively the effects of weak story irregularity on earthquake behavior and rough construction costs of RC buildings by considering different soil-conditions given in the Turkish Earthquake Code. With this aim, Sta4-CAD program based on matrix displacement method is utilized. Considering that different story height and compressive strength of concrete, and infill walls or their locations are the variables, a set of structural models are developed to determine the effect of them on earthquake behavior and rough construction costs of RC buildings. In conclusion, some recommendations and results related to making RC buildings safer and more economical are presented by comparing results obtained from structural analyses.

액체로켓엔진 산화제 배관 시스템 전산유동해석 (Computational Analysis of an LOx Supply Line System of an Liquid Rocket Engine)

  • 문인상;문일윤;이수용
    • Journal of Astronomy and Space Sciences
    • /
    • 제26권4호
    • /
    • pp.693-702
    • /
    • 2009
  • 액체로켓엔진의 구성품 중 하나인 산화제 라인 시스템의 3차원 모델과 유동해석을 수행하였다. 전체 시스템의 유동해석에 앞서 각 구성품들의 개별적인 유동해석과 단순화된 모델을 통해 최적의 위치를 결정하였다. 그 결과 가스발생기 라인의 입구는 압력보상이 필요하며 오리피스의 위치에 따라 출구 유동의 형태가 달라지는 것을 확인할 수 있었다. 전체적으로 해석된 라인 시스템은 주어진 요구조건을 만족하는 것으로 나타났으며 이는 실제 제품 제작과 시험을 통해 확인할 예정이다.

도시가로공간의 공공디자인 개선사업에 따른 열환경 개선 효과 평가 (Evaluation of Thermal Environment Improvement Effect from Public Design Improvement Project on the Urban Street Space)

  • 백상훈;시미즈아키;김학윤;정응호
    • 한국환경과학회지
    • /
    • 제20권9호
    • /
    • pp.1105-1114
    • /
    • 2011
  • In this study, thermal environment improvements throughout public design improvement project on the urban street space were compared and evaluated. Thermo-Render 3.0, 3D-CAD based thermal environment simulation program, had been used for thermal environment improvement evaluations. Followings are the results. First, clayey blocks which have low heat transfer rate and cool island effect by trees and roof gardens brought cooling effects for buildings and surface of streets. Seconds, MRT values showed low levels because of low radiant mulching materials. Thirds, roof gardens contributed to reduce heat island effect since HIP levels were affected by decreasing heat storage effect of buildings from roof gardens. As a result, reducing heat storage effect throughout selecting and arranging proper materials which would not increase heat island potentials should be performed to improve heat island effects.

A Cell-Network Type SC DC-DC Converter with Large Current Output

  • Eguchi, Kei;Ueno, Fumio;Zhu, Hongbing;Tabata, Toru;Tanoue, Takashi
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -2
    • /
    • pp.1121-1124
    • /
    • 2002
  • In this paper, an IC realization of a cell-network type SC DC-DC converter is reported. To achieve small and low-cost realization, the converter is designed by using a 1.2 $\mu\textrm{m}$ CMOS technology. The CMOS implemented converter will be useful as a building block of various mobile equipments since step-up and step-down voltages can be provided at one time. Concerning the proposed DC-DC converter, SPICE simulatiorls are performed to investigate the characteristics of the circuit. The SPICE simulations show that, the efficiency of the simulated circuit is more than 95 %. From the layout design using a CAD tool, MAGIC, the VLSI chip is fabricated in the chip fabrication program of VLSI Design and Education Center(VDEC), the University of Tokyo with the collaboration by On-Semiconductor. The proposed circuit is integrable by a standard 1.2 $\mu\textrm{m}$ CMOS technology.

  • PDF

Design Improvement of the Smith Machine using Simulation on Musculoskeletal Model

  • Kim, Taewoo;Lee, Kunwoo;Kwon, Junghoon
    • International Journal of CAD/CAM
    • /
    • 제12권1호
    • /
    • pp.1-8
    • /
    • 2012
  • This study analyzes the characteristics of two different kinds of squat exercise through physical experiments and a computer simulation, i.e. one with a free weight and the other with a Smith machine are studied. This study also proposes a new design for the Smith machine, which has both the advantages of each type based on the results of the analysis. The muscle force and level of stimulation of the lower extremities during squatting were calculated by running an inverse dynamics analysis program on a musculoskeletal model together with the measured motion data. The calculated results were verified by comparing with the measured EMG data. The analysis showed that squatting using free weight is more effective than squatting using the Smith machine. Meanwhile, in order to design an improved Smith machine, which is the final goal of this study, the trajectory of the barbell of the subjects during free weight squatting was measured on the sagittal plane. The measurement showed that the average slope of the trajectory of the barbell is tilted backward by $10.7^{\circ}$. Based on this measurement, this study proposes a tilted design for an improved Smith machine.

다물체 모델링을 이용한 2단 유성식 외륜 고정형 사이클로이드 감속기의 진동특성분석 (Vibration Analysis of Planetary Fixed Outer-ring Type Cycloidal Speed Reducer by using Multi-body Modeling)

  • 김홍기;이기복;유홍희
    • 한국소음진동공학회논문집
    • /
    • 제23권3호
    • /
    • pp.234-239
    • /
    • 2013
  • There are many types of speed reducer for industrial uses. However the cycloid speed reducer is widely used in manipulators based on excellent performance of low backlash, high reduction ratio and compact size. It is essential to use precision speed reducer for accuracy of position controls on robot systems and electric vehicles. The cycloid speed reducer has a eccentric rotating motion and offset to avoid some problem of assembly, so it has a disadvantage for vibration. In this paper, a multi-body dynamic model is developed for a cycloid speed reducer and the dynamic behaviors of the reducer are investigated. The cycloid speed reducer consists of cycloidal plate gears, housing gear, input shaft, output pin and shaft, and eccentric bearings. Using a CAD program, each component of cycloid reducer is modeled based on the offset and eccentric. Multi-body simulations using Recurdyn and test using a rig tester are performed. As a result, the pin reaction force and the amplitude of housing displacement are increased by the larger offset and smaller eccentric value of cycloid reducer.