• 한국생활과학회지
• /
• 제17권1호
• /
• pp.57-80
• /
• 2008

The contemporary consumers have insatiable desires for material and outward appearance. In terms of the desire for outward appearance, people recognize that a beautiful outward appearance can be made by an artificial effort. Subsequently, the interest in a beauty and fashion has been increased. In addition, a cable TV shows a beauty and fashion program targeted for women in 20s to 30s. This study tried to examine the stories on experience of consumption by consumers watching a beauty and fashion program in a women specialized channel of a cable TV. The total number of narrators who participated in this study was 11. Among them, we formed 26 narrative plots on the basis of interviews for 7 persons who could use Labov's structural analysis. The result of analyzing narrators' narrative plots was as follows: First, although narrators received the information on beauty and fashion through a channel which became the target of this study, they applied such information into an ordinary life by transforming such information. Second, narrators thought that their confidence and superiority could be expressed through a beauty and fashion. Third, narrators' consuming life showed a showing off-type consumption and an objective consumption. Fourth, narrators have a gap between the behavior orientation and real actions. And they experiences various trobles on consumption life. Fifth, through the interview for narrators, a trend of reconsidering their consuming life was found out.

• 한국강구조학회 논문집
• /
• 제22권4호
• /
• pp.345-354
• /
• 2010

기존의 빔과 거더로 이루어진 장스팬 구조물의 경우 기둥 사이의 거리가 길기 때문에 부재의 크기와 수직 처짐이 증가하게 된다. 효과적인 장스팬 구조물의 실현을 위하여 구조물 하부에 스트럿과 케이블로 구성된 언더텐션시스템을 적용하였다. 이는 거더의 휨모멘트를 효과적으로 분산시키기 때문에 부재의 크기를 줄이고 경제적인 효과를 기대할 수 있다. 또한 급속시공을 위한 폐단면 신형상의 모듈화 PF500단면을 사용하여 성능을 검증하고자 하였다. 언더텐션 시스템의 성능검증을 위하여 가로 10m, 세로 2.4m의 실험체 두개를 대상으로 가력실험을 실시하였고 언더텐션 시스템 유무와 케이블 장력변화에 따른 거동을 확인하였다. 실험으로부터 케이블 장력이 증가함에 따라 실험체의 거동이 작아졌으며 언더텐션 시스템이 하중분배 역할을 수행하는 것으로 나타났고 PF500단면의 성능이 우수함을 나타내었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1222-1229
• /
• 2010

비선형 측심기를 이용한 초고해상 음향탐사는 기존의 고해상 음향탐사보다 투과력은 작지만 해상력이 뛰어나기 때문에 천해역에서의 해저환경조사에 유용하게 사용된다. 비선형 지층탐사 시스템은 정확한 수심측정 뿐 아니라 퇴적층과 하부구조에 대한 상세한 정보를 제공한다. 특히 상부 퇴적층의 정밀층후 및 퇴적구조 확인을 통해 해저에 파묻혀 있는 pipeline, 침몰선박, 인위적 물체 등에 대한 탐색에 이용된다. 이 연구에서는 초고해상 지층탐사기를 이용하여 얻어진 지층탐사 기록과 지질자료를 대비하여 오염퇴적층을 구분하였다. 그리고 지층 기록에 나타나는 음향이상을 해석하여 해저에 매설된 케이블의 매설 깊이를 검측하였다.

• 방송공학회논문지
• /
• 제16권2호
• /
• pp.305-318
• /
• 2011

스위치드 디지털 비디오(SDV; Switched Digital Video) 기술은 시청자들이 특정 채널을 선택할 때마다 그 채널에 해당되는 방송 데이터만을 실제로 송출해주는 선택형 송출기술로 현재 주파수 대역폭 부족 문제를 겪고 있는 케이블사업자들에게 주목받고 있다. 미국에서는 이미 SDV 서비스를 성공적으로 상업화하여 2300만 이상의 가구가 SDV 기술을 적용한 케이블 방송을 시청하고 있다. 우리나라 역시 HD 방송, 초고속 인터넷, VoD, VoIP 등의 광대역 고품질 서비스의 수요가 폭발적으로 증가되고 있어 주파수 자원 확보 및 효율적인 자원 관리 방안으로 SDV 기술의 도입을 고려하고 있다. 본 논문에서는 SDV 기술의 특징 및 동작 구조, 주파수 절감 효과, 기술적 요구사항에 관해 고찰한다. 그리고, SDV 기술의 채널 스위칭 성능 및 시스템 안정성을 검증하기 위해 SDV 테스트베드를 구축하고 실시된 기술 시험 결과를 분석한다.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.29-37
• /
• 2011

The modal characteristics of a compressor wheel of an automotive turbocharger have been investigated using an experimental method based on an acoustic frequency response function, p/f(${\omega}$), where p is sound pressure radiated from a structure, and f is impact force. First, a well-defined annular disc with narrow radial slots was examined to check whether the vibro-acoustic test could precisely determine natural quencies and vibration modes of structures showing that the vibro-acoustic test proposed in this paper was comparable to the conventional modal test with an accelerometer and the numerical analysis. The conventional method has been found to be inappropriate for compressor wheel because of additional mass due to the accelerometer and additional damping from the accelerometer cable alter the dynamic responses of the wheel blades. odal characteristics of the wheel have been defined using vibro-acoustic test and verified with the results from another conventional method using a laser vibrometer. Natural quencies and mode shapes of a turbocharger wheel, which can't be precisely obtained with onventional method, could be defined accurately without the additional effects from sensor and cable. Proposed method can be applied to small structures where conventional sensors and cables could generate troubles.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.79-84
• /
• 2008

초고해상 음향탐사는 기존의 고해상 음향탐사보다 투과력은 작지만 해상력이 뛰어나기 때문에 천해역에서의 해저환경조사에 유용하게 사용된다. 특히 상부 퇴적층의 정밀 층후 및 퇴적구조 확인을 통해 해저에 파묻혀 있는 pipeline, 침몰선박, 인위적 물체 등에 대한 탐색에 이용된다. 이 연구에서는 초고해상 지층탐사기를 이용하여 얻어진 지층탐사 기록과 지질자료를 대비하여 오염퇴적층을 구분하였다. 그리고 지층 기록에 나타나는 음향이상을 해석하여 해저에 매설된 케이블의 매설 깊이를 검측하였다.

• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.283-288
• /
• 2010

모바일 하버용 크레인은 항만 부두에 설치되어 있는 일반 지상식 크레인과는 달리 소형 경량 구조를 요구한다. RORI 크레인은 이러한 요구조건을 만족시키기 위해 고안된 신개념의 모바일 하버용 크레인 시스템으로서 해상에서 컨테이너 상하역 작업을 고속으로 처리할 수 있을 뿐만 아니라 운항 시에는 완전히 접을 수 있도록 되어 있다. 본 연구는 컨테이너 상하역 작업에 따른 RORI 크레인의 수평붐 끝단 처짐량 분석에 관한 내용으로, 카스틸리아노 정리를 이용한 이론적인 방법과 유한요소법에 의한 수치해석적인 방법을 적용하였다. 두 기법으로 구한 끝단 처짐량을 비교분석함으로써 유한요소해석의 타당성을 입증하고, 케이블의 초기장력에 따른 끝단 처짐량 변화특성을 파라메트릭하게 분석하였다.

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.420-423
• /
• 2020

This study proposes an indirect constant voltage control algorithm for hybrid solid-state transformers (HSSTs) by using primary side information. Considering the structure of HSSTs, measuring voltage and current information on the primary side of a transformer is necessary to control the converter and inverter of the power converter. The secondary side output voltage is measured to apply the conventional secondary side constant voltage control algorithm, and thus, the digital control board requires the same rated insulation voltage as that of the transformer. To solve this problem, the secondary voltage of the transformer obtained from the tap voltage is used. Moreover, output voltage decreases as load increases because the proposed indirect constant voltage control scheme does not consider the cable impedance between the secondary output terminal and the load. This study also proposes a technique for compensating the secondary output voltage by using the primary current of the transformer and the resistance value of the cable. An experiment is conducted using a scale-down HSST prototype consisting of a 660 V/220 V tap transformer. The problem of the proposed indirect constant voltage control strategy and the improvement effect due to the application of the compensation method are compared using the derived experimental results.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.147-161
• /
• 2020

Constructive merging of "basic" systems of different behavior creates hybrid systems. In doing so, the structural elements are grouped according to the behavior in carrying the load into a geometric order that provides sufficient load and structure functionality and optimization of the material consumption. Applicable in all materializations and logical geometric forms is a transparent system suitable for the optimization of load-bearing structures. Research by individual authors gave insight into suitable system constellations from the aspect of load capacity and the approximatemethod of estimating the participation of partialstiffnesswithin the rigidity ofthe hybrid system. The obtained terms will continue to be the basisfor our own research of the influence of variable parameters on the behavior of hybrid systemsformed of glued laminated girder and cable of different geometric shapes. Previous research has shown that by applying the strut-type hybrid systems can increase the load capacity and reduce the deformability ofthe free girder.The implemented parametric analysis pointsto the basic parameterin the behavior of these systems-the rigidity ofindividual elements and the overallstiffnessofthe system.The basic idea ofpre-stressing is that, in the load system or individual load-bearing element, prior to application of the exploitation load, artificially challenge the forcesthatshould optimize the finalsystembehaviorin the overall load. Pre-stressing is possible only if the supporting system orsystem's element possesssufficientstrength orstiffness, orreaction to the imposed forces of pre-stressing. In this paper will be presented own research of the relationship of partial stiffness of strut-type hybrid systemsofdifferentgeometric forms.Conducted parametric analysisofhybridsystemswithandwithoutpre-stressing, and on the example of the glulam-steel strut-type hybrid system under realistic conditions of change in the moisture content ofthe wooden girder,resulted in accurate expressions and diagramssuitable for application in practice.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.363-379
• /
• 2013

Dynamic displacement of structures is an important index for in-service structural condition and behavior assessment, but accurate measurement of structural displacement for large-scale civil structures such as long-span bridges still remains as a challenging task. In this paper, a vision-based dynamic displacement measurement system with the use of digital image processing technology is developed, which is featured by its distinctive characteristics in non-contact, long-distance, and high-precision structural displacement measurement. The hardware of this system is mainly composed of a high-resolution industrial CCD (charge-coupled-device) digital camera and an extended-range zoom lens. Through continuously tracing and identifying a target on the structure, the structural displacement is derived through cross-correlation analysis between the predefined pattern and the captured digital images with the aid of a pattern matching algorithm. To validate the developed system, MTS tests of sinusoidal motions under different vibration frequencies and amplitudes and shaking table tests with different excitations (the El-Centro earthquake wave and a sinusoidal motion) are carried out. Additionally, in-situ verification experiments are performed to measure the mid-span vertical displacement of the suspension Tsing Ma Bridge in the operational condition and the cable-stayed Stonecutters Bridge during loading tests. The obtained results show that the developed system exhibits an excellent capability in real-time measurement of structural displacement and can serve as a good complement to the traditional sensors.