• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.275-280
• /
• 2018

Methyl ester derived from coconut oil is very interesting to study since it contains free-fatty acid with chemical structure of medium carbon chain ($C_{12}-C_{14}$), so the methyl ester obtained from its part can be a biodiesel and another partially into biokerosene. The use of heterogeneous catalysts in the production of methyl ester requires severe conditions (high pressure and high temperature), while at low temperature and atmospheric conditions, yield of methyl ester is relatively very low. By using microwave irradiation trans-esterification reaction with heterogeneous catalysts, it is expected to be much faster and can give higher yields. Therefore, we studied the production of methyl ester from coconut oil using CaO catalyst assisted by microwave. Our aim was to find a kinetic model of methyl ester production through a transesterification process from coconut oil assisted by microwave using heterogeneous CaO catalyst. The experimental apparatus consisted of a batch reactor placed in a microwave oven equipped with a condenser, stirrer and temperature controllers. Batch process was conducted at atmospheric pressure with a variation of CaO catalyst concentration (0.5; 1.0; 1.5; 2.0, 2.5%) and microwave power (100, 264 and 400 W). In general, the production process of methyl esters by heterogeneous catalyst will obtain three layers, wherein the first layer is the product of methyl ester, the second layer is glycerol and the third layer is the catalyst. The experimental results show that the yield of methyl ester increases along with the increase of microwave power, catalyst concentration and reaction time. Kinetic model of methyl ester production can be represented by the following equation: $-r_{TG}=1.7{\cdot}10^6{_e}{\frac{-43.86}{RT}}C_{TG}$.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.933-938
• /
• 2004

The clinkerbility and the behaviour of formation of $3CaO{\cdot}Al_{2}O_3$ were studied using the mixture of waste oyster shell and spent oil-refining catalyst mainly by the mineral and microstructural observation. By virtue of the formation of $12CaO{\cdot}7Al_{2}O_3$ at relatively low temperature and its successive reaction with CaO, the $3CaO{\cdot}Al_{2}O_3$ clinkers were formed easily without affection of minor constituents contained in oyster shell. Thus clinkers were formed at $1400^{\circ}C$ directly but began to melt incongruently at higher temperature above that. Aluminium hydroxide, however, was not desirable as an aluminous raw materials of the clinker because rapid melting occurs before $3CaO{\cdot}Al_{2}O_3$ forms main clinker mineral.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.238-242
• /
• 2016

The effect of the alkali, alkali earth metal elements on selective catalytic reduction(SCR) catalyst deactivation behavior were investigated in terms of microstructure, surface area, pore volume and De-NOx test. Poisoned SCR catalyst were manufactured by injection of $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$, $H_3PO_4$ solutions in the new SCR catalyst at $350^{\circ}C$ for 6 hours. New and poisoned catalysts surface were similar. But specific surface area, pore volume decrease from Na, Mg, K, Ca, P compared to new SCR catalyst. Especially, Na poisoned catalyst surface area and pore size extremely decreased by $10.20m^2/g$, $0.061cm^2/g$. De-NOx test results of new and poisoned catalysts at $150{\sim}450^{\circ}C$ indicated that alkali metal (K, Na) poisoned SCR catalysts have the lowest De-NOx efficiency, alkali earth metal poisoned SCR catalysts (Ca, Mg) De-NOx efficiency are higher than alkali metal poisoned SCR catalysts. P poisoned SCR catalyst De-NOx efficiency is similar new SCR catalyst. It were considered that physical deactivation of SCR catalyst was affected by SCR catalyst surface area and pore volume change.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.421-426
• /
• 2010

The transesterification of rapeseed oil, soybean oil, and mixed fat were conducted at $65^{\circ}C$ with $Al_2O_3$-supported CaO, 0.8 wt% KOH, 1 wt% NaOH and mixed catalyst. The overall conversion(%) of rapeseed oil indicated to be 96% at the 12:1 molar ratio of methanol to oil, 8 wt% CaO and 2 wt% water. The pH ranges of biodiesel for mixed fat using four catalysts and for three fats using 8wt% CaO were 7.3-9.1, 7.3-7.5, respectively. The volumes of water needed to wash biodiesel from rapeseed oil using 0.8 wt% KOH and 8 wt% CaO were 15 mL and 3 mL.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.1
• /
• pp.75-83
• /
• 2020

This study investigated the degradation characteristics and biodegradability of phenol, refractory organic matters, by injecting MgO and CaO-known to be catalyst materials for the ozonation process-into a Dielectric Barrier Discharge (DBD) plasma. MgO and CaO were injected at 0, 0.5, 1.0, and 2 g/L, and the pH was not adjusted separately to examine the optimal injection amounts of MgO and CaO. When MgO and CaO were injected, the phenol decomposition rate was increased, and the reaction time was found to decrease by 2.1 to 2.6 times. In addition, during CaO injection, intermediate products combined with Ca²⁺ to cause precipitation, which increased the COD (chemical oxygen demand) removal rate by approximately 2.4 times. The biodegradability of plasma treated water increased with increase in the phenol decomposition rate and increased as the amount of the generated intermediate products increased. The biodegradability was the highest in the plasma reaction with MgO injection as compared to when the DBD plasma pH was adjusted. Thus, it was found that a DBD plasma can degrade non-biodegradable phenols and increase biodegradability.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.165-170
• /
• 2016

In this study, we investigated the cause of the decrease in activities of $VO_x/TiO_2$ SCR catalyst used for the burner reactor at a scale of $150000Nm^3/hr$ using X-ray diffraction (XRD), brunauer-emmett-teller (BET), atomic emission spectroscopy inductively coupled plasma (AES ICP), $H_2$ temperature programmed reduction ($H_2$-TPR), and $NH_3$ temperature programmed desorption ($NH_3$-TPD) analysis. Since the crystallization of the $VO_x$ and phase transition of $TiO_2$ did not occur, it was concluded that the catalyst was not deactivated by the thermal effect. In addition, from the elemental analysis showing that a large quantity of calcium was detected but not sulfur, the deactivation process of the $VO_x/TiO_2$ SCR catalyst was mainly caused by Ca but not by $SO_2$. The calcium was also found to decrease the catalytic activity by means of reducing $NH_3$ adsorption.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.435-440
• /
• 2018

Nyamplung (Calophyllum inophyllum Linn) is one of the most widely grown plants in Indonesia. In addition, nyamplung oil has a future competitive advantage in that it can be processed into biodiesel. However, conventional methods for transesterification of nyamplung oil have been less effective. Therefore, in this study biodiesel was produced using microwaves as one of the alternative methods that can improve the shortcomings of conventional methods. In addition, optimization of parameters such as microwave power, catalyst concentration and transesterification time was done using Box-Behnken design. The combination of microwave with CaO catalyst and treated with Box-Behnken design are considered as a new and modern method for production of biodiesel from nyamplung oil and optimizing the factors that affected the transesterification process. The results showed that factors such as microwave power of 449.29 W, concentration of catalyst of 4.86% and transesterification time of 10.07 min can produce optimal yield of biodiesel of 92.73% with reliability of 93.22%.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.27-36
• /
• 2004

Nickel oxide was recovered through roasting of a spent catalyst for hydrogenation reaction. Nickel on Kieselguhr catalysts were prepared by a precipitation method after a treatment of the recovered-nickel oxide with an acid. Effects of roasting temperature of the spent catalyst on recovery of nickel oxide was investigated. Most of nickel oxide could be recovered through roasting of the spent catalyst at $1000^{\circ}C$. In regeneration of catalysts by the precipitation method after the treatment of nickel oxide with an acid, the effect of promoter, precipitation condition and reduction condition on catalytic performance in vegetable oil hydrogenation were investigated. The addition of CaO or $Ce_2$$O_3$ resulted in an increase of catalytic activity.

• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.79-87
• /
• 2004

Esterification of soybean oil with methanol was investigated. First of all, liquid-liquid equilibriums for systems of soybean oil and methanol were measured at temperatures ranging from 40 to 65$^{\circ}C$. Profiles of conversion of soybean oil with time were determined from the glycerine content in reaction mixtures for the different kinds of catalysts, such as NaOH, CaO, Ca(OH)$_2$, MgO, Mg(OH)$_2$, and Ba(OH)$_2$. The effects of dose of catalyst, cosolvent and reaction temperature on final conversion were examined. Esterification of waste vegetable oil with methanol was investigated and compared to the case of soybean oil. Solubility of methanol in soybean oil was substantially greater than that of soybean oil in methanol. When the esterification reaction of soybean oil was catalyzed by solid catalyst, final conversion was strongly dependent on the alkalinity of the solid catalyst, and increased with the alkalinity of the metal. Hydroxides from the alkali metals were more effective than oxides. When Ca(OH)$_2$ was used for the esterification catalyst, maximum value of final conversion was measured at dose of 4％. When CHCl$_3$ as a cosolvent, was added into the reaction mixture of soybean oil which catalyzed by Ba(OH)$_2$, maximum value of final conversion was appeared at dose of 3％. When waste vegetable oil was catalyzed by NaOH and solid catalysts, high final conversion, over 90％, and fast reaction rate were obtained.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.269-274
• /
• 2004

Using heterogeneous catalyst, esterification reaction of soybean oil (SBO) with methanol was investigated. Distributions of components in mixtures of soybean oil and methanol were measured at temperatures ranging from 40 to $65^{\circ}C$. Glycerine contents of reaction mixtures were measured for the different kinds of catalysts, such as NaOH, CaO, Ca(OH)$_2$, MgO, Mg(OH)$_2$, and Ba(OH)$_2$. Based on the measured glycerine concentrations, conversions of the reaction mixtures were calculated. The effects of dose of catalyst, cosolvent and reaction temperature on final conversion were examined. Solubility of methanol in soybean oil was substantially greater than that of soybean oil in methanol. When the esterification reaction of soybean oil was catalyzed by heterogeneous catalyst, final conversion was strongly dependent on the alkalinity of the heterogeneous catalyst, and increased with the alkalinity of the catalyst material. Hydroxides from the alkali metals were more effective than oxides, which actually had no catalytic effects. When Ca(OH)$_2$ was used for the esterification catalyst, maximum value of final conversion was measured at dose of 4%. The final conversion and reaction rate increased with reaction temperature, and showed substantial increment at reaction temperature of 5$0^{\circ}C$. When cosolvent, CHCl$_3$, was added into the reaction mixture of soybean oil which catalyzed by Ba(OH)$_2$, maximum value of final conversion was appeared at dose of 3%.