• The Korean Journal of Mycology
• /
• v.18 no.3
• /
• pp.149-157
• /
• 1990

Five strains of Armillaria mellea were collected from the forest of Chonbuk province and isolated from the tissue of fruit bodies. Nutritional and environmental characteristics of mycelial cultivation and rhizomorph production of Armillaria mellea isolated were determined in sawdust media, woody inocula and soils. The sawdust media of Styphnolobium japonicum, Culhamia simplex, Populus monilifera and Populua davidiana were proper for mycelial growth. The ranges of optimum pH, temperature and moisture content for mycelial growth were in the range of $4.5{\sim}5.0$, ${\sim}25^{\circ}C$ and $65{\sim}70%$, respectively. Among the various additives and inorganic salts added, 10% rice bran and 3% $CaCO_3$ were effective to mycelial growth. The woody inocula of Styphnolobium japonicum, Culhamia simplex, Quercus acutissima and Quercus veriabilis were proper for rhizomorph production. The ranges of optimum pH, moisture content and temperature for rhizomorph production were in the range of $4.5{\sim}4.9,$ $45{\sim}55%\;(w/w)$ and $20{\sim}24^{\circ}C$, respectively. Distribution of rhizomorphs in soil was varied with depth, but the main concentration occurred in the range of $7.5{\sim}12.5\;cm$. They were rarely found below 25.0 cm.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.916-922
• /
• 2018

Recently, power plant effluent condensers received a Renewable Energy Certificate as components of hydrothermal energy (weighted 1.5 times) as one target item of the Renewable Portfolio Standard (RPS) policy. Accordingly, more attention is being paid to the value of thermal wastewater as a heat source. However, for utilization of thermal wastewater from power plants in high-turbidity areas like the West Sea of Korea, a turbidity reducing system is required to reduce system contamination. In this study, an experimental test was performed over a month on thermal wastewater from power plants located in the West Sea of Korea. It was found that water turbidity was reduced by more than 80 % and that the concentration of organic materials and nutrient salts was partially reduced due to the reduction of floating/drifting materials. To conduct a comparative analysis of the level of contamination of the heat exchanger when thermal wastewater flows in through a turbidity reducing system versus when the condenser effluent flows in directly without passing through the turbidity system, we disassembled and analyzed heat exchangers operated for 30 days. As a result, it was found that the heat exchanger without a turbidity reducing system had a higher level of contamination. Main contaminants (scale) that flowed in to the heat exchanger included minerals such as $SiO_2$, $Na(Si_3Al)O_8$, $CaCO_3$ and NaCl. It was estimated that marine sediment soil flowed in to the heat exchanger because of the high level of turbidity in the water-intake areas.

• Membrane Journal
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2014

The composite membranes were prepared on the surface of hydrophobic porous poly (vinylidene fluoride) (PVDF) hollow fiber membranes through the interfacial polymerization. The preparation variables were the concentrations of piperazine (PIP), trimesoyl chloride (TMC) and the contents of polyethylene glyco l (PEG). The separation characterization of the resulting membranes were carried out for aqueous 100 ppm solution of NaCl, $CaSO_4$, and $MgCl_2$ and also mixed 300 ppm solution of NaCl and $CaSO_4$ in terms of the flux and rejection. Both the flux and rejection were the highest when the interfacial polymerization was conducted using TMC. When TMC concentration was 0.1 wt%, the flux and rejection were shown 48.3 LMH ($L/m^2{\cdot}hr$) and 59%, respectively. To improve the flux, the annealing post-treatment and the addition of PEG into piperazine were done. As expected, the overall flux was enhanced while the rejection was reduced.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.83-94
• /
• 2000

The mottling in coated paper is one of the most difficult problems to solve in the area of offset printing. The prevention of mottling requires optimization of coating color formation, especially the minimum of binder migration. In this paper, we studied a mottling. Kaolin clay and CaCO3 as pigment, starch and latex as binder of coating color were used in this study. We have measured surface property of 24 coated samples through k value, mottle value and transferred ink. In the equation of Walker and Fesko, the value of k was the highest and that of mottle and the mount of transferred ink were the lowest in kaolin 60 part. And it is more easy to analyze the various surface of coated paper when sample was exposed on IR.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.24-29
• /
• 1996

The purpose of this study is to propose new estimation method of unit cement content in hardened concrete. In general, the quantity of cement in hardened concrete is tested by hydrochlonic acid dissolving cement paste, however, hydrochloric acid dissolves sea shell contained in sea sand and lime stone in concrete. Therefore, the tested cement content is apt to estimate greater than actual cement content. The sodium gluconate solution dissolves only cement in concrete, it is hard to dissolve sea shell and lime stone as CaCo3. The effects of the quantity, concentration and temperature of sodium gluconate solution, the ignition temperature, the ignition loss of cement on the cement content and the percentage of dissolution of cement were investigated to establish a test method. From the results of these tests, the fundamental test method for cement content of hardened concrete by sodium gluconate is proposed.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.26-34
• /
• 1999

A thermostable pullulanase has been isolated and purified from Thermus caldophilus GK-24 to a homogeneity by gel-filtration and ion-exchange chromatography. The specific activity of the purified enzyme was 431-fold increase from the crude culture broth with a recovery of 11.4%. The purified enzyme showed $M_{r}$ of 65 kDa on denaturated and natural conditions. The pI of the enzyme was 6.1 and Schiff staining was negative, suggesting that the enzyme is not a glycoprotein. The enzyme was most active at pH 5.5. The activity was maximal at $75^{\cire}C$ and stable up to $95^{\cire}C$ for 30 min at pH 5.5. The enzyme was stable to incubation from pH 3.5 to pH 8.0 at $4^{\cire}C$ for 24hr. The presence of pullulan protected the enzyme from heat inactivation, the extent depending upon the substrate concentration. The activity of the enzyme was simulated by $Mn^{2+}$ ion, }$Ni^{2+}$, $Ca^{2+}$, $Co^{2+}$ ions. The enzyme hydrolyzed the ${\alpha}$-1,6-linkages of amylopectin, glycogens, ${\alpha}$, ${\beta}$-limited dextrin, and pullulan. The enzyme caused the complete hydrolysis of pullulan to maltotriose and the activity was inhibited by $\alpha$, $\beta$, or $\gamma$-cyclodextrins. The $NH_{2}$-terminal amino acid sequence [(Ala-Pro-Gln-(Asp of Tyr)-Asn-Leu-Leu-Xaa-ILe-Gly-Ala(Ser)] was compared with known sequences of various sources and that was compared with known sequences of various sources and that was different from those of bacterial and plant enzymes, suggesting that the enzymes are structurally different.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1066-1071
• /
• 2017

Recently high voltage impulse (HVI) technique has been extensively studied for desalting processes to control the $CaCO_3$ scale formation in industrial water practices such as power plant, boiler, and heat exchange operations. Investigation of the operational parameters for the HVI is important, however, those had not been reported yet. In this study, the effect of initial feed volume and contact time on reduction of calcium ion concentration by the HVI technique was investigated. Initial feed volumes of artificial hard water which contained 100 mg/L of $Ca^{2+}$, were set to 1, 2, and 3 L respectively. After 24hr of HVI contact with 12kV, $Ca^{2+}$ ion was reduced to 50, 29 and 19 % of their initial concentration, indicating that calcium removal increased as initial feed volume decreased. This implies the applied HVI pulse energy per unit mass of calcium is important parameter determining overall desalting efficiency. A series of extended operations of HVI up to 30 days verified the long term stability of the HVI system. The calcium ion declined to 40 mg/L after 2~3 days, and further reduction of calcium was not achieved, indicating that optimum operation time could be 2~3 days under these experimental conditions. Consequently, it was confirmed that the important operational parameter of HVI technique is initial feed volume and contact time as well as the applied voltage that was already proven in the previous study.

• Applied Biological Chemistry
• /
• v.24 no.1
• /
• pp.7-14
• /
• 1981

Among the Basidiomycetes, Pleurotus ostreatus 301 and Lentinus edodes 3-1 were chosen because of their good enzyme productivity and rapid mycelial growth in rice straw medium. Their cultural conditions adequate for the enzymes production and effects of various materials and inorganic salts added to thd rice straw media were investigated. L. edodes 3-1 was excellent in productivity of cellulase and xylanase, and P. ostreatus 301 in protease. The optimum conditions for enzyme production were at $30^{\circ}C$ in cellulase production and at $25^{\circ}C$ in xylanase and protease production, with 75% moisture content and 5.0-6.0 initial pH. The appropriate cultural periods, for enzyme production were 30 days and 35 days for P. ostreatus 301 and L. edodes 3-1, respectively. Among the various materials added, defatted soybean, defatted rape seed, or defatted sesame were all effective to enzyme production but reduced mycelial growth. Rice bran was also effective, particularly at 30% concentration. The addition of inorganic salts showed effective to enzyme production. Among inorganic salts, optimum concentration of $CaCO_3$ was 5%, and that of $CaSO_4$ was 2%.

• The Korean Journal of Physiology
• /
• v.19 no.2
• /
• pp.101-111
• /
• 1985

Transient inward current (TI) was studied by the two micro-electrode voltage clamp technique in the sinoatrial node of the rabbit. The author confirmed that in $10^{-6}$ M ouabain TI was found in the SA node and investigated the effects of ions, $(Na^+,\;K^+,\;Ca^{2+})$, $\beta-agonist$ (isoprenaline), local anesthetics (quinidine, lidocaine) and Ca-blockers ($Co^{2+}$, verapamil, diltiazem) on the TI recorded during depolarizing voltage clamp pulses to -40 and -20 mV. The results obtained were as follows ; 1) $10^{-6}M$ ouabain increased the frequency of sinus action potential and decreased the amplitude, especially overshoot of action potential. TI was induced by the depolarizing voltage clamp Pulses and the magnitude of the slow inward current (isi) decreased and the time course was slowed by the same depolarizing pulses. 2) 30% $Na^{+}$ and 24mM $K^+$ decreased by $10^{-6}M$ ouabain and 6 mM $Ca^{2+}$ and $10^{-7}M$ isoprenaline increased TI, $i_{si}$ and current oscillations. 3) Quinidine $(5\times10^{-7}M)$ reduced TI and $i_{si}$ but lidocaine $(10^6\;-10^5M)$ didn't reduced or increase TI. Current oscillations increased and isi decreased by lidocaine. 4) Ca-blockers decreased the amplitude and the frequency of sinus action potential. TI and $i_{si}$ decreased significantly but were not abolished completely at the concentrations used in this experiment. Verapamil and diltiazem had inhibitory action on TI in $2\times10^{-7}M$ concentration and showed very slow recovery after wasting out with normal Tyrode solution.

• Journal of Embryo Transfer
• /
• v.9 no.2
• /
• pp.145-152
• /
• 1994

The suitable electric stimulation is essential for activation and fusion of oocytes before or after nuclear transplantation The present study was undertaken to determine the optirnal condition for the parthenogenetic activation of in vitro rnatured(IVM) bovine oocytes by electric stimulation. Different direct current(DC) electric voltage of 1.0, 1.5 and 2.0 kV/cm and pulse duration of 30, 60 and 120 $\mu$sec were applied to the JVM nocytes in 0.3 M mannitol solution containing each 100 $\mu$M CaCl$_2$ and MgCl$_2$. IVM occytes at 24, 28 and 32 hours Post-maturation(hpm) were also electrically stimulated at 1.5 kV /cm, for 60 $\mu$ sec. The stimulated nocytes were then co-cultured in TCM-199 solution containing 10% fetal calf serum with bovine oviductal epithelial cells for 7~9 days in a 5% $CO_2$ incubator at 39$^{\circ}C$ ~ Their activation and in vitro development to morula and blastocyst were assessed under an inverted microscope. The higher activation rates 62.8 and 63.4% and in vitro de- velopment rates to morula and blastocyst 5.1 and 10.9% were shown in the oocytes stimulated at the voltage of 1.0 and 1.5 kV/cm than 2.0 kV/cm, respectively. No signifi- cantly(P<0.05) different activation rate was shown in JVM oocytes stimulated for 30, 60 and 120 $\mu$sec, but developmental rates to morula and blastocyst was significantly(P<0.05) higher in the oocytes stimulated for 30 $\mu$sec(6~3%) and 60 $\mu$sec(10~0%) than 120 $\mu$sec(0~ 0%). The aged oocytes at 28 and 30 hpm showed significantly(P<0.05) higher activation rates(72~7 and 79.7%) than the oocytes at 24 hpm(50~9%)~ Also, their developmental rates to morula and blastocyst were significantly(P<0.05) higher in the nocytes at 28(14.3%) and 32 hpm(15.9%) than 24 hpm(3.6%). From these results, it can be suggested that the optimal electric stimulation for IVM bovine occytes is a DC voltage between 1.0 and 1.5 kV/cm, pulse duration of 30 or 60 $\mu$sec, and the optimal age of IVM oocytes for electric activation is at 32 hpm.