• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.981-989
• /
• 1992

This is a study on the effects of cristobalite transition of quartz in semi-vitrious whiteware body, as addition of alkali and alkali earth oxides, prepared by pottery stone, feldspar, kaolin and clay minerals. The amounts of ${\alpha}$-quartz to ${\alpha}$-cristobalite transition, F.O.C. (fraction of cristobalite), were increased with firing temperature. In MgO added body, ${\alpha}$-quartz was decreased and the formation of cristobalite was increased. Effects of K2O addition was remarkably decreased the formation of cristobalite. Additive effects of MgO and K2O were confirmed that it was very different to variation of transition temperature of metakaolinite to Si-Al spinel structure in thermal reaction of kaolinite minerals. Result CaO addition was ineffective to transition temperature, and the transition temperature in Na2O added body was decreased, but relative intensity of quartz and cristobalite crystal in XRD results was decreased. This was characterized by the effects on the formation of liquid phase much more.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 1999

In this study we investigated the effects of process variables on the bond strength, and its dependency upon the interfacial chemistry when the joined $ZrO_2$ toughened $Na\beta$"-alumina to $\alpha$-alumina using B$_2$$O_3$-$SiO_2$-Al$_2$$O_3$-CaO glass sealant. We observed that bond strength is mainly determined by the strength of the glass, which, in turn, depends on the glass composition established after joining reaction. Joining at $950^{\circ}C$ for 15min yielded the highest average bond strength of 66MPa. Different types of interfacial reaction seem to occur at each interface. After joining at $950^{\circ}C$ for 15min we found that Ca and Si diffuse much deeper(~15$\mu\textrm{m}$) into the $\beta$"-alumina composite than into the $\alpha$-alumina(<1$\mu\textrm{m}$) as a result of ion exchange reaction and more effective grain boundary diffusion. Thermal expansion coefficient of the glass was found to have changed more closely to those of the $\beta$"-alumina composite and $\alpha$-alumina, which put the glass under a slight compressive stress.ressive stress.

• 소성∙가공
• /
• 제28권1호
• /
• pp.34-42
• /
• 2019

In this study, various alloying elements (Cr, Sr, Ca, Cd) were added to improve the mechanical properties of ADC12 fabricated by a die casting process. The effect of alloying elements on the microstructure and mechanical properties were investigated. The phase analysis results of the modified ADC12 alloy with conventional ADC12 alloy, showed the similar characteristics of Al matrix, Si phase, $CuAl_2$ phase and the Fe intermetallic phase. As a result of the microstructure observation, the secondary dendrite arm spacing (SDAS) was shown to have decreased after the addition of the alloying elements. The eutectic Si phase, which existed as flake form in the conventional ADC12 alloy, was modified finely as a fiber form in the modified ADC12 alloy. It was observed that the $CuAl_2$ phase as the strengthening phase was relatively finely distributed in the modified ADC12 alloy. The Fe intermetallic appeared as a Chinese script shaped $Al_6$ (Mn,Fe) which is detrimental to mechanical properties in conventional ADC12 alloy. On the other hand, in the modified ADC12 alloy, polyhedral ${\alpha}-Al_{15}Si_2$ $(Fe,Mn,Cr)_3$ was observed. The tensile properties were improved in the modified ADC12 alloy. The yield strength and tensile strength increased by 12.4% and 10.0%, respectively, in the modified ADC12 alloy, and the elongation was also seen to have been increased. As a result of the pin on disk wear test, the wear resistance properties were also improved by up to about 7% in the modified ADC12 alloy. It is noted that the wear deformation microstructures were also observed, and it was found that the fine eutectic Si and strengthening phases greatly improved abrasion resistance.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.233-240
• /
• 2012

백색 발광다이오드(white light-emitting diodes)를 이용한 광소자는 소비전력이 상대적으로 작고, 안정적이며, 수은과 같은 유해 중금속을 포함하지 않기 때문에, 에너지 절약 및 친환경 산업측면에서 유망한 산업으로 급속히 발전하고 있다. 국내의 경우 LED 조명의 효율, 신뢰성, 연색성을 향상시키는데 필수 소재인 형광체의 기술 확보에 대한 관심이 높아지고 있다. 이러한 관점에서 기존의 YAG, TAG, silicate 계열 산화물 형광체 뿐만 아니라 고온특성이 우수한 산/질화물계 형광체 개발에 대한 관심이 높아지고 있다. 특히 산/질화물계 형광체 조성에서 $M_2Si_5N_8$ : $Eu^{2+}$, $MAlSiN_3$ : $Eu^{2+}$ M-SiON(M = Ca, Sr, Ba), ${\alpha}/{\beta}$-SiAlON : $Eu^{2+}$과 같은 재료는 440~460 nm 영역에서의 넓은 여기파장과 우수한 발광효율로 청색 LED 칩을 이용한 백색 LED에 넓게 사용되고 있다. 이 논문에서는 이러한 산/질화물계 형광체 조성의 결정학적, 광학적 특성 및 응용에 대해서 정리하였다. 또한 최근에 주목받고 있는 양자점(quantum dots) 형광체를 응용한 white LEDs의 개발동향에 대해서도 알아보도록 한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.1-1
• /
• 1994

;The electronic state calculations for various types of ceramic materials have beell performed by the use of $DV-X\;{\alpha}$ cluster method. The molecular orbital levels and wave functions for model clusters have been computed to study the electronic properties ami chemical bonding of the ceramics. For ${\beta}-sialon(Si_{6-z}Al_zO_zN_{8-z})$ which is a high temperature structural material based on ${\beta}-Si_3N_4$, we have made model cluster calculations to estimate the strength of chemical bonding between atoms by the Mulliken population analysis. It is found that the covalent bonding between Si and N atoms is very strong in pure ${\beta}-Si_3N_4$, but the covalency around solute atom is considerably weakened when Si atom is substituted by AI. This tendency is enhanced by an additional substitution of oxygen atom for N. The result calculated can well explain the experimental data of changes in mechanical properties such as the reductions of Young's modulus and Vickers hardness with increment of z-value in ${\beta}-sialon$. Various model clusters for transition metal oxides which show many interesting physical and chemical properties have also been calculated. High-valent perovskite-type iron oxides EMFe0_3E(M=Ca and Sr) possess very interesting magnetic and chemical properties. In these oxides, iron exists as $Fe^{4+}$ state, but the experimental measurement of Mossba~er effect suggests that disproportionation $2Fe^{4+}=Fe^{3+}+Fe^{5+}$ takes place for $CaFe0_3$ at low temperatures. The model cluster calculations for these compounds indicated the existence of considerably strong covalent bonding of Fe-O. The calculations of hyperfine interaction at iron neucleus show very good agreement with the experimental Mossbauer measurements. The result calculated also implies that the disproportionation reaction is strongly possible by assuming the quenching of breathing phonon mode at low temperatures.tures.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.153-153
• /
• 2017

The application of the coating supports the mechanical characteristics of the implant, and various materials and coatings are currently being used in the implant in a way to accelerate adhesion. Especially, plasma electrolytic oxidation (PEO) coating has been proposed continually with good surface treatment of titanium alloys. Also, the PEO process can incorporate Ca and P ions on the titanium surface through variables varied factor. PEO process for bioactive surface has carried out in electrolytes containing Ca and P ions. Natural bone is composed of mineral elements such as Mg, Si, Zn, Sr, and Mn, etc. Especially, Mg and Si of these elements play role in bone formation and growth after clinical implantation of bio-implants. In this study, corrosion charateristics of PEO-treated Ti-6Al-4V alloy in solution containing Si and Mg ions has been investigated using several experimental techniques. The PEO-treated surfaces were identified by X-ray diffraction, using a diffractometer (XRD, Philips X' pert PRO, Netherlands) with Cu $K{\alpha}$ radiation. The morphology was observed by field-emission scanning electron microscopy (FE-SEM, Hitachi 4800, Japan) and energy-dispersive X-ray spectroscopy (EDX, Oxford ISIS 310, England). The potentiodynamic polarization and AC impedance tests for electrochemical degradations were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

• 융복합기술연구소 논문집
• /
• 제4권1호
• /
• pp.21-27
• /
• 2014

White LEDs (light-emitting diodes) are promising new-generation light sources which can replace conventional lamps due to their high reliability, low energy consumption and eco-friendly effects. This paper briefly reviews recent progress of oxy/nitride host phosphor and quantum dot materials with broad excitation band characteristics for phosphor-converted white LEDs. Among oxy/nitride host materials, $M_2Si_5N_8:Eu^{2+}$, $MAlSiN_3:Eu^{2+}$ M-SiON(M=Ca, Sr, Ba), ${\alpha}/{\beta}-SiAlON:Eu^{2+}$ are excellent phosphors for white LED using blue-emitting chip. They have very broad excitation bands in the range of 440-460 nm and exhibit emission from green to red. In this paper, In this review we focus on recent developments in the crystal structure, luminescence and applications of the oxy/nitride phosphors for white LEDs. In addition, the application prospects and current trends of research and development of quantum dot phosphors are also discussed.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.27-38
• /
• 1993

본 연구에서는 제철소에서 발생하는 전로 dust를 사용하여 심강법(분급)에 의한 철산화물을 분리하여 고순도의 철분말을 회수하였으며, 아래와 같은 결론을 얻었다. 가. 전로 dust의 물성 1) 재항의 1제강, 2제강 C/F(Clarifier) dust, 광장의 E/C(Evaporation coolar), dust, 중국강철공사(C.S.C) OM(Clarifier underflow) dust 금철분이 63~72%로 높고, Metal Fe 가 21~50% 함유되어 있으며, 기타 산화물로는 CaO, MgO, Al$_{2}O_{3}$, SiO$_{2}$ 등이 있다. 2) 재항의 1제강, 2제강 C/F dust, 광양의 E/C, E/P dust, 중국강철공사(C.S.C), OM(clarifier underflow) dust 입자의 형상은 청입이 주로 구형으로 응고된 모양이었으며, 일반적으로는 출립의 외각부는 magnetite, hematite 등으로 산화가 진해되어 있다. 3) 전로 dust 들에 대한 X-ray 회절분석결과, 재항의 1제강, 2제강, C/F dust, 광양의 E/C, E/P dust는 ${\alpha}$-Fe, FeO(wusute)가 중성분으로 존재하며 그 밖에 FE$_{3}O_{4}$9magnetite), Fe$_{2}O_{3}$ CaO가 소량으로 존재하고 있었으며, 중국강철공사(C.S.D) OM(underflow) dust는 ${\alpha}$-Fe, ${\alpha}Fe_{2}O_{3}$, graphite가 주성분으로 존재하며, 그 밖에 $Fe_{3}O_{4}$, Fe$_{2}O_{3}$, ZnO이 소량으로 존재하고 있었다. 4) 순수한 순철분말과 전로 dust를 구성하고 있는 순철은 마광에 따른 입자의 분쇄보다는 마광시 구형의 입자가 소성변형으로 인해 flake형상으로 변하여 체질입도분석시 입도의 증가를 초래하였으며, 반면 철산화물은 마광에 따른 입자의 미세화가 발생함을 볼 수 있었다. 나. 철분구 외수 실험 1) 광양의 dust를 40분간 마광하여 심강(분급)실험을 행했을 때 Fe 99.17% 품위 철분말을 37.8% 회수할 수 있었다. 2) 재항의 C/F dust를 40분간 마광하여 심강(분급)실험을 행했을 때 Fe 98.38% 품위의 철분말을 44.42% 회수할 수 있었다. 3) 70 gauss 자석을 사용하여 자력선별을 행했을 때 +65-200 mesh 사이에서 Fe 품위 98% 이상의 철분말을 회수 할 수 있으나 회수율(14%)이 낮다.

• 분석과학
• /
• 제18권4호
• /
• pp.278-286
• /
• 2005

The crystal structure of ($Tl_{71}$-Y ($Tl_{71}Si_{121}Al_{71}O_{384}$), ${\alpha}=24.706(3){\AA}$, dehydrated at 653 K and $8{\times}10^{-6}$ torr, has been determined by single-crystal X-ray diffraction techniques in the cubic space group $Fd\bar{3}m$ at 294(1) K. The structure was refined using all intensities to the final error indices (using only the 302 reflection for which $F_{\circ}$ > $4{\sigma}(F_0)$) $R_1=0.0602$ (based on F) and $R_w=0.1744$ (based on $F_2$). The 71 $Tl^+$ ions per unit cell are found at four crystallographically distinct positions. Site I' position in the sodalite cavity opposite D6Rs are each occupied by eighteen $Tl^+$ ions per unit cell; these $Tl^+$ ions are recessed ca. $1.45{\AA}$ into the sodalite cavity from their O(3) plane (Tl-O=2.701(15), $3.163(16){\AA}$ and O-Tl-O=$92.1(4)^{\circ}$). The 23 $T1^+$ ions fill site II in the supercage; these $T1^+$ ions are recessed ca. $1.58{\AA}$ into the supercage from their O(2) plane (Tl-O = 2.850(16), $3.156(16){\AA}$ and O-T1-O = $85.1(5)^{\circ}$). The 19 $Tl^+$ ions lie at site III' in the supercage near a triple 4-ring (Tl-O = 3.10(7), $3.39(5){\AA}$ and O-Tl-O = 47.8(9), $95.3(18)^{\circ}$) and the remaining II ions occupy another site III' near a triple 4-ring in the supercage (Tl-O = 2.81(4), $2.71(4){\AA}$ and O-Tl-O = $57.3(8)^{\circ}$).

• 한국자기학회지
• /
• 제3권1호
• /
• pp.23-28
• /
• 1993

복합타게트 방식의 고주파 2극 마그네트론 스퍼터링 장치를 이용하여 Fe-Hf-C계 극미세 결정 연자성 박막을 제조하여 박막조성, 열처리 조건 및 기판과 그 하지층이 자기적 성질에 미치는 영향을 조사하였다. Fe-Hf-C계 초미세 결정 연자성 박막은 Hf 8-10at.%, C 14-18at.%의 조성범위에 서 비정질과 결정질의 경계에 가까운 조성일수록 연자성이 향상되었으며 포화자속밀도 16 kG, 1 MHz 에서의 실효투자율 4000 이상의 연자성을 나타내고 $600^{\circ}C$ 까지도 투자율 3000정도의 열적안정 성을 나타내었다. 기판 및 하지층에 따른 연자성 특성은 미세구조의 변화 보다는 기판/자성막 및 하지층/자성막간의 상호확산에 의해 주로 영향을 받는 것으로 나타났다.