• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.129-134
• /
• 2012

Purpose: This study was conducted to investigate the colors of zirconia and veneered ceramics according to the build-up method of veneer porcelain. Methods: The samples were divided into three groups: a group for which a liner was applied to the zirconia surface and dentine coating was built up and burned (Cz1), a group for which the dentine coating was directly built up and burned (Cz2), and a group for which the samples were wash-burned with dentine coating and a dentine coating was built up and burned again (Cz3). The the colors were measured with a Spectrophoto-meter. Results: The average $L^*$ value of the Cz3 group was the highest among the groups at $59.1{\pm}0.5$ (P<0.05), followed by Cz2 at $57.5{\pm}0.8$ and Cz1 at $56.6{\pm}1.3$. The $a^*$ value of Cz3 was negative at $-0.0{\pm}0.0$ and the $a^*$ values of Cz2 and Cz1 were positive at $0.2{\pm}0.1$ and $0.4{\pm}0.0$, respectively (P<0.05). The $b^*$ of Cz1 was the highest at $11.2{\pm}0.6$, followed by Cz3 at $10.8{\pm}0.5$ and Cz2 at $10.5{\pm}0.8$ (P<0.05). Conclusion: Compared to other experimental groups, the Cz3 groups showed the brightest colors with high brightness and relatively low green and yellow levels.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.374.1-374.1
• /
• 2016

Copper and zinc are well known elements with antibacterial effect. So in this research, Cu and Zn (CZ) nanofibers (NFs) were fabricated by electrospinning method using polyvinylpyrrolidone (PVP) for adjusting viscosity. The CZ/PVP precursor solutions were prepared with copper sulfate pentahydrate, and zinc acetate dihydrate. Distilled water was used for solvent and PVP was used to regulate the viscosity of precursor solution. The CZ/PVP NF composites were obtained by electrospinning method using the precursor solution. The average diameter of obtained CZ/PVP NFs was determined by optical microscopy using Motic image plus 2.0 program and was found to be 490 nm. The chemical environment of the obtained CZ/PVP NF composites was investigated with X-ray photoelectron spectroscopy (XPS). After heating the obtained CZ/PVP NF composites at 353 K, the solvent was removed. The characteristic C 1s, Cu 2p, and Zn 2p core level XPS peaks were observed. After calcination the CZ/PVP NF composites at 873 K in Ar environment for 5 hrs, PVP was decomposed at this temperature and CZ NF was obtained. This was confirmed by decreasing the intensity of C 1s.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2901-2909
• /
• 2020

Thermal creep is a key property of zircaloy cladding. CZ developed by CGN is a new zircaloy used as PWR fuel cladding. This research is devoted to investigating the thermal creep behavior of CZ and build the thermal creep model of CZ. Twenty internal pressure creep tests were conducted, and the ranges of temperature and Tresca stress were 320-430 ℃ and 70-300 MPa, respectively. Real-time creep data were analyzed by separating primary creep and steady-state creep. Based on Soderberg model and creep test data, CZ thermal creep model is derived. As a whole, the mean value and the standard deviation of P/M of CZ saturated primary creep strain are very close to these from steady-state creep rate, however, the predictive effect of primary creep is less satisfactory. Four conditions, where there exists large deviation between predicted values and test data, are 320 ℃ and 300 MPa, 350 ℃ and 190 MPa, 380 ℃ and 160 MPa, 380 ℃ and 190 MPa, respectively. As primary creep was much smaller than steady-state creep in long-time operation, the thermal creep model built can be applied to predict the thermal creep behavior of CZ cladding.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.47-52
• /
• 2013

본 연구는 $Ni/Ce_xZr_{1-x}O_2$ 촉매를 이용하여 프로판의 자열개질반응을 통한 수소제조에 관한 것이다. $Ni/Ce_xZr_{1-x}O_2$ 촉매는 용매로서 물을 사용한 방법(CZ-W), 우레아와 물을 사용한 방법(CZ-UW), 우레아, 에탄올 및 물을 사용한 방법(CZ-UWA)으로 각각 제조하였다. 반응물질의 조성은 $Steam/C_3H_8$=3, $C_3H_8/O_2$=2.70 이었고, 반응은 상압 고정층 유통식 반응기에서 $300{\sim}700^{\circ}C$ 온도범위에서 진행하였다. 촉매제조시 용매에 우레아 및 에탄올을 첨가할 경우 촉매의 활성이 증가하였다. CZ-UW 촉매의 경우 클러스터형태의 탄소생성에 기인한 활성점 피막으로 인해 쉽게 비활성화가 초래됐다. 하지만 CZ-UWA 촉매의 경우 반응 후 탄소가 활성에 영향을 미치지 않는 나노파이버형태로 존재하여 활성저하가 발생되지 않음을 SEM을 통해 확인했다. 또한 $Ni/Ce_{0.75}Zr_{0.25}O_2$ 촉매의 전환율 및 수율이 더 좋게 나타났으며 또한 소량의 Cobalt를 첨가했을 때 탄소에 대한 저항성이 크게 향상됨을 TGA로 확인하였다.

• 농업과학연구
• /
• 제51권1호
• /
• pp.87-95
• /
• 2024

The objective of this study was to investigate the anti-obesity effects of adding Momordica charantia (MC) and Chrysanthemum zawadskii var. latilobum (CZ) extracts to drinking water on obesity-induced mice. A total of 84 eight-week-old C57BL/6N male mice with an initial body weight (BW) of 28.11 ± 1.39 g were used in this study. All treatments were fed a high-fat diet for d 28. Mice were randomly divided into seven drinking treatments (six replicate each treatment) based on the initial BW. Treatments are as follows: control (CON), normal tap water, MC 1, CON with 1% MC aqueous extract, MC 2, CON with 2% MC aqueous extract, CZ 1, CON with 1% CZ aqueous extract, CZ 2, CON with CZ aqueous extract (2%), MCZ 1, CON with 1% MC aqueous extract and 1% CZ aqueous extract, MCZ 2, CON with 2% MC aqueous extract and 2% CZ aqueous extract. During the entire period, the CZ 1, MCZ 1, and MCZ 2 significantly decreased (p < 0.05) gain to feed than CON. The CON significantly higher (p < 0.05) water intake than other treatments on d 0 to 14. The MCZ 1 significantly decreased (p < 0.05) relative (ratio of absolute organ weight to BW) organ weights, including retroperitoneal white adipose tissue (RWAT) weight and inguinal white adipose tissue (IWAT) weight, compared to CON. In conclusion, our study suggests that there was no significant difference in the anti-obesity effects between MC and CZ, and MCZ 1 has synergistic effects by regulating adipose tissue.

• 한국미생물·생명공학회지
• /
• 제50권2호
• /
• pp.193-201
• /
• 2022

Methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-susceptible S. aureus (MSSA) are major causes of hospital- and community-acquired infections. The treatment of biofilm-related infections caused by these bacteria is a global healthcare challenge. Therefore, the development of alternative therapeutics is required. An essential oil extracted from Curcuma zedoaria (CZ) Rosc, also known as white turmeric, has been reported to possess various antimicrobial activities. In the present study, we evaluated the antibiofilm activities of an ethanolic extract of the CZ rhizome against MRSA and MSSA. The results showed that the CZ extract with the highest sub-minimum inhibitory concentration (sub-MIC), 1/2 MIC (0.312 mg/ml), significantly inhibited biofilm production by up to 80-90% in both tested strains. Subsequently, we evaluated the ability of the CZ extract to prevent cell-surface attachment to a 96-well plate and extracellular DNA (eDNA) release from the biofilm. The CZ extract demonstrated an inhibitory effect on bacterial attachment and eDNA release from the biofilm biomass. The CZ extract may inhibit biofilm formation by preventing eDNA release and cell-surface attachment. Therefore, this CZ extract is a potential candidate for the development of alternative treatments for biofilm-associated MRSA and MSSA infections.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.369-380
• /
• 2020

대부분의 단결정 실리콘 잉곳은 초크랄스키(Czochralski(Cz)) 공정으로 제조된다. 그러나 단결정 실리콘 잉곳을 제품화 및 태양 전지 기판으로 가공하였을 때 산소 불순물이 있는 경우 낮은 효율성을 나타내는 경향이 있다. 단결정 Si-잉곳의 생산을 위해서는 용융 Si를 녹인 다음 단결정 Si의 시드(Seed)로 결정화하는 초크랄스키(Cz) 공정을 도입한다. 용융된 다결정 Si-덩어리를 단결정 Si-잉곳으로 결정성장 될 때, 열 전달은 Cz-공정의 구조에서 중요한 역할을 한다. 본 연구에서 고품질 단결정 실리콘 잉곳을 얻기 위해 Cz-공정의 최적화된 설계를 구성하였다. 결정 성장 시뮬레이션로부터 결정성장을 위한 Pulling rate 및 Rotation speed에 최적의 변수값을 형성하기 위해 사용되었으며, 변형된 Cz-공정에 대한 연구 및 해당 결과가 논의되며 결정 성장 시뮬레이션을 사용하여 Cz-공정의 Pulling rate, Rotation speed 및 Melt charge level의 최적화된 설계로 인한 결정성장시 단결정 실리콘으로 유입되는 산소 농도 최소화를 설계하였다.

• 충청수학회지
• /
• 제20권4호
• /
• pp.535-542
• /
• 2007

In this paper, we investigate the generalized Hyers-Ulam{Rasssias stability of the following Euler-Lagrange type quadratic functional equation $$f(ax+by+cz)+f(ax+by-cz)+f(ax-by+cz)+f(ax-by-cz)=4a^2f(x)+4b^2f(y)+4c^2f(z)$$.

• 한국결정성장학회지
• /
• 제23권6호
• /
• pp.265-271
• /
• 2013

Czochralski(CZ) 성장공정은 LED 기판용 고품질의 사파이어 단결정을 성장시키기 위한 중요한 기술 중 하나이다. 본 연구에서는 300 mm 길이의 사파이어 단결정 위한 유도 가열방식의 CZ 성장공정을 FEM으로 수치적 해석하였다. 또한 도가니의 형상 및 상부 단열재 보강 등 hot zone 구조를 변경하고, 결정의 온도 변화를 분석하였다. 본 연구의 결과, 고-액 계면의 높이는 성장 속도의 균형이 이루어져 초기에 80 mm 부터 중기 이후 40 mm 정도까지 감소하였다. 또한 CZ 성장로의 최적 입력 전력은 도가니 형상 변경 및 상부 단열재 보강에 의한 보상효과로 기존 300 mm 용 CZ 성장로 조건과 유사하다. 그리고 Hot zone 구조를 변경한 CZ 성장로를 이용해 성장시킨 결정의 온도는 기존 보다 약 10 K 정도 상승 되는 것으로 분석되었다. 본 연구에서 도출된 결과를 CZ 성장공정에 적용하여 300 mm 길이를 갖는 c-축 사파이어 단결정을 성공적으로 성장시킬 수 있었고, 단결정 성장공정에 대한 시뮬레이션 분석기법의 타당성 및 유용성을 확인하였다.

• 대한한의학회지
• /
• 제26권1호
• /
• pp.1-10
• /
• 2005

Objective: We examined the antimetastatic effect of Curcuma zedoaria Roscoe (CZ) on pulmonary metastasis of B 16 cells. Methods: For 6 weeks, Zedoariae Rhizoma made from dried CZ were dissolved in distilled water and administered to mice 2 weeks before they were injected with B]6 melanoma cells. Mice were given CZ at doses of 250 and 500 mg/kg, and were compared for lung weight, survival days, and NO production. Results: Intake of CZ throughout the experiment extended the average survival time. Intake after B16 cell injection slightly prolonged survival time, but intake before B]6 cell injection did not influence life span. We examined the effect of CZ on macrophage function by measuring NO production. After the macrophages were given CZ for 6 weeks, the amount of NO generated by the macrophages stimulated with LPS in culture medium increased. NO generated by the macrophages also served as a cytotoxic factor against B16 melanoma cells. B16 melanoma-conditioned medium reduced NO production by macrophages. However, CZ treatment reversed the reduction in NO production by the conditioned medium significantly. Conclusion : These findings may suggest that macrophage function-modulating activity by CZ appears to underlie its antimetastatic activity, which leads to a decrease in the number of lung metastatic surface nodules and the extension of life span.