• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.295-308
• /
• 2012

This study intends to analyze the up-cycling trend that is attracting great attention these days and its internal meaning in the context of fashion art. And, based on this, to provide enhanced value and creativity in the future fashion artwork and design businesses, keeping abreast of further fashion art developments. As part of the study methodology, both a literature review and a case study were carried out, along with an examination of up-cycling and research into related pictures and content. The materials covered in this work include design and fashion related books and domestic and foreign magazines from 2000 to 2011, when the up-cycling movement was initiated as a form of eco-friendly design. For the analysis of fashion art pieces, generic terms included art wear, wearable art wear, and unwearable art. Case review was followed by the works of artists shaping their fashion concept and meaning entirely from abandoned clothes and fabrics, waste materials, and their art collection. Consequently, key elements of the value of up-cycling fashion art are that it is eco-friendly, has a unique identity, and reflects multi-dimensionalism. This research saw the integration of fashion with other variables, artistic attributes, and reuse of resources. This could lead to a new realm where value-addition is formed and extended, thus providing another chance for the fashion industry.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.1
• /
• pp.105-122
• /
• 2011

The fundamental design goal of wireless sensor MAC protocols is to minimize unnecessary power consumption of the sensor nodes, because of its stringent resource constraints and ultra-power limitation. In existing MAC protocols in wireless sensor networks (WSNs), duty cycling, in which each node periodically cycles between the active and sleep states, has been introduced to reduce unnecessary energy consumption. Existing MAC schemes, however, use a fixed duty cycling regardless of multi-hop communication and traffic fluctuations. On the other hand, there is a tradeoff between energy efficiency and delay caused by duty cycling mechanism in multi-hop communication and existing MAC approaches only tend to improve energy efficiency with sacrificing data delivery delay. In this paper, we propose two different MAC schemes (ADS-MAC and ELA-MAC) using closed-loop control in order to achieve both energy savings and minimal delay in wireless sensor networks. The two proposed MAC schemes, which are synchronous and asynchronous approaches, respectively, utilize an adaptive timer and a successive preload frame with closed-loop control for adaptive duty cycling. As a result, the analysis and the simulation results show that our schemes outperform existing schemes in terms of energy efficiency and delivery delay.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.2
• /
• pp.139-151
• /
• 2019

This study intends to present the directions for effective up-cycling design using Marquage painting through analysis of trends and the formative characteristics of fashion products. Research was conducted through a literature review (published papers, books and web site contents). Cases were analyzed by examining the contents of web sites of global luxury brands, representative workshops, and social network sites (SNS). The results of the study are categorized as follows, First, Marquage paintings are continuously used by global luxury brands and have developed as an expression of self-ownership and the personalization of one's identity. Second, fashion brands use Marquage painting as a customized service for sales. On the other hand, Marquage paintings are used as a kind of up-cycling to present old goods as brand new ones. Third, the patterns used in Marquage painting were classified into five types: geometric patterns, logo patterns, character patterns, lettering patterns, and art patterns. Moreover, formalization by Marquage patterns is represented by identification, customization, and up-cycling. Finally, to up-cycle the expressive features of Marquage- sustainability, scarcity, storytelling, and originality based on factors of up-cycling need to be reflected.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• The Journal of the Korean dental association
• /
• v.58 no.6
• /
• pp.324-335
• /
• 2020

We investigated whether fluoride varnishes recover the hardness of bovine teeth under 20 days of demineralization/remineralization cycling. The fluoride varnish groups (two commercial fluoride varnishes [V-varnish (Vericom, Korea) and CavityShield (3M ESPE, USA)] and an experimental fluoride varnish including 5 wt.% NaF were compared with a control group without fluoride varnish. Vickers hardness was measured at baseline, 3 days after immersion in caries-inducing solution, 24 hours after application of a fluoride varnish, and after 10 and 20 days of demineralization/remineralization cycling. Afterward, tooth surfaces were observed by scanning electron microscope. After fluoride varnish application and the cycling 10 and 20 days, the experimental varnish group showed the highest hardness, while the CavityShield and the control groups demonstrated the lowest hardness. The experimental varnish group recovered the hardness of the baseline at 24 hours after application of the varnish, while it was recovered after 20 days of the cycling in case of the V-varnish. However, the CavityShield and the control groups did not recover the hardness even after 20 days of the cycling. The experimental fluoride varnish with fast recovery in the hardness of the baseline can be used as an effective fluoride varnish to resist demineralization and to facilitate remineralization.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.597-606
• /
• 1999

This study was performed to evaluate the effect of aging and thermal cycling on the biaxial flexure strength of low commercially available veneering resin composites for crown(Dentacolor : DC, Artglass : AG, Esternia : ET and Targis : TG). Disc specimens were fabricated in a teflon mold giving 12mm in diameter and 1mm in thickness. All samples were divided into 4 groups. Group 1 was dried in a dessicator at $25^{\circ}C$ for 30 days. Group 2 was immersed in distilled water at $37^{\circ}C$ for 30 days. Group 3 was immersed in distilled water at $65^{\circ}C$ for 30 days. Group 4 was subjected to 10,000 thermal cycles between $5^{\circ}C\;and\;55^{\circ}C$, and the immersion time in each bath was 15 seconds per cycle. Biaxial flexure test was conducted using the ball-on-three-ball method at the cross head speed of 0.5mm/min and fracture surfaces were observed with scanning electoron microscope. The results obtained were summarized as follows; 1. Weibull modulus values, except for the AG group, decreased after thermal cycling treatment. 2. Biaxial flexure strength values of aging group at $37^{\circ}C$ were the lowest in all sample groups. Except for the DC group, strength values were significantly decreased for the drying group. 3. After thermal cycling test, the highest value of biaxial flexure strength of 188.8 MPa was observed in the ET group and the lowest value of 73.2 MPa was observed in the DC group. The strength values showed the significant differences in each group (p<0.05). 4. Observation of surfaces after thermal cycling test revealed the ditching in the part of surrounding large fillers.

• The Research Journal of the Costume Culture
• /
• v.29 no.3
• /
• pp.374-387
• /
• 2021

The purpose of this study is to develop up-cycling fashion design methods centered on discarded denim material for the study of original up-cycling design methods. Up-cycling fashion design work was developed using digital clothing technology. This is a recent hot topic among sustainable fashion design methods. Up-cycling fashion design expression methods (categorized as dismantlement, collages, dépaysement, grafting, weaving, and tearing) were centered on design methods. These methods create various three-dimensional modeling effects in planar forms, whereby five pieces can be applied to the fabric and digitally produced. The results are as follows: First, the use of discarded denim fabric for the development of up-cycling fashion design pieces enabled the recycling of existing resources, provided solutions to environmental pollution problems, and provided expansion opportunities for design processes for sustainable fashion products that expand the design value of denim products and their utility. Second, new eco-friendly fashion designs that attempt to achieve diversity in modern fashion trends could be presented through formative contemporary fashion produced by up-cycling work products. Third, up-cycling fashion design work is expected to provide opportunities for eco-friendly fashion design methods. This will expand the value of sustainable fashion design by recycling simple waste materials through the use of three-dimensional digital clothing technology and further through the presentation of expanded life cycles that extend product planning, production, and life cycles.

• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.74-74
• /
• 1999

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.57-72
• /
• 2018

Organic agriculture seeks sustainable agriculture. Organic agriculture is based on circulating agriculture of a family farm unit. However, as of the end of 2016, only 33 out of the total organic farming farms were implementing Crop-Livestock cycling organic farming. The reason seems to be a matter of income after all. The optimal size combination refers to the scale by which family farms can maintain their quality of life while engaging in farming activities. In other words. it is a farm scale that maintains optimal income through stable labor costs. In the meantime, there has been no previous study on the optimal economical combination of Crop-Livestock cycling farming. Choi (2016) analyzed whether the economies of scope (EOS) were realized in the combined production by using the management data of the farmers who practiced Crop-Livestock cycling organic farming for four years. As a result, it has been revealed that the EOS measurement value is 0 or more so the economies of scope are being realized. Therefore, the purpose of this empirical analysis is to identify farm incomes under this circumstance. It is assumed that the optimum production is achieved by balancing the total income curve and the total cost curve in the optimal scale production range. The results of the analysis are as follows. First, the income after the conversion to Crop-Livestock cycling farming was 44,789,280 won, the sum of the seedling-livestock sector, which was 17,873,120 won higher when the non-Crop-Livestock cycling farming was assumed. The same is true for 2014 and 2015. The reason for this is that pig droppings were composted from organic seedlings, and the cost of selling pork was 150,000 won/per pig more expensive even though the manufacturing cost of organic feeds was higher than the purchasing cost. Secondly, this study simulated the result that the economic index varies when the farm size combination is changed by the farm size of 100% standard (S100) as of 2014. S130 is the increase in size from 100% of 2014, whereas S30 is the result of 3ha crop and 66 livestock (pigs). As a result of this simulation, Crop-Livestock cycling farming income decreased more than non-Crop-Livestock cycling farming as the farm size decreased, whereas the income decreased as the farm size increased. When the size was reduced below S50, the income tended to decrease. In this situation, EOS changed in the same direction. The results showed that when the farming size was reorganized and reduced to 50% compared to 2014, the income and income difference was the highest. At the same time, economies of scope (EOS) were the highest at 0.12985. In other words, it was found that the income of farm houses in a family farm unit sector was the best in the combination of 1.5ha crop agriculture and 110 livestock (pigs).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1856-1863
• /
• 2004

In the last 50 years, lead-contained solder materials have been the most popular interconnect materials used in the electronics industry. Recently, lead-free solders are about to replace lead-contained solders for preventing environmental pollutions. However, the reliability of lead-free solders is not yet satisfactory. Several researchers reported that lead-contained solders have a good fatigue property. The others published that the lead-free solders have a longer thermal fatigue life. In this paper, the reason for the contradictory results published on the estimation of fatigue life of lead-free solder is investigated. In the present study, fatigue behavior of 63Sn37Pb, and two types of lead-free solder joints were compared using pseudo-power cycling testing method, which provides more realistic load cycling than chamber cycling method does. Pseudo-power cycling test was performed in various temperature ranges to evaluating the shear strain effect. A nonlinear finite element model was used to simulate the thermally induced visco-plastic deformation of solder ball joint in BGA packages. It was found that lead-free solder joints have a good fatigue property in the small temperature range condition. That condition induce small strain amplitude. However in the large temperature range condition, lead-contained solder joints have a longer fatigue life.