• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.928-933
• /
• 2001

EGR(Exhaust Gas Recirculation) is an effective strategy to control nitrogen oxides emissions from diesel engine. The EGR reduces $NO_x$ through lowering the oxygen concentration in the combustion chamber as well as through heat absorption. However, application of EGR system is difficult because of the penalty in fuel consumption and the increase in particulate matter. The engine used for the experimental was a 3-cylinder 0.8-liter turbo-charged light duty diesel engine with an electronic EGR valve. In this study, experiments were performed at variable vehicle speeds and loads on the chassis dynamometer. To evaluate the exhaust emissions with the EGR system testing was performed using cvs-75 mode test procedure. Results of the cvs-75 mode test achieve sufficiently to meet EURO3 standards.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.18-24
• /
• 2003

Vehicle emission is one of the major sources of air pollution, and provides some undesirable effects on the atmospheric environment and human health. In this study, the driving data were recorded during road tests in Seoul metropolitan wet and analyzed by statistical techniques. The objective of the study is to analyze the driving Patterns of passenger car that influence on emissions in urban driving. The results show that the average speed is around 29.2 km/h, and the average fuel economy is 10.23 km/$\ell$. The vehicle speed of Seoul metropolitan area is slower, and the stop-and-go operation is more frequent than CVS-75 test mode which is used far emission and fuel economy test.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.37-43
• /
• 2003

The exhaust gas recirculation (EGR) is needed for one of various strategies to reduce NOx emission. But to get the proper EGR rate, the intake and exhaust system become complicated, also application of EGR system is difficult because of the penalty in fuel consumption and the increase in particulate matter. This study is focused on the development of EGR valve using the electrical method. The effects of EGR on the characteristics of NOx, CO, CO2 emissions and particulate mater have been investigated using small-displacement size 0.8-liters engine of diesel passenger car operating at several loads and speeds. After the analysis and comparison between conventional E-EGR valve and developed E-EGR valve performance by test bench, the estimation of vehicle application was executed through the EGR map and CVS-75 test result measured on the chassis dynamometer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.104-104
• /
• 2011

The fuel economy estimates essentially serve two purposes : to provide consumers with a basis on which to compare the fuel economy of different vehicles, and to provide consumers with a reasonable estimate of the range of fuel economy they can expect to achieve. The current fuel economy label values utilize measured fuel economy over city driving cycles. However, this test driving mode can not be evaluated the variety factor of the real-world. These factors include differences between the way vehicles are driven on the road and over the test cycles, air conditioning use, widely varying ambient temperature and humidity, widely varying trip lengths, wind, precipitation, rough road conditions, hills, etc. The purpose of this paper is to account for three of these factors on the fuel economy : 1) on-road driving patterns (i.e. higher speeds and more aggressive driving (higher acceleration rates)), 2) air conditioning, and 3) colder temperatures. The new test methods will bring into the fuel economy estimates the test results from the five emissions tests in place today : CVS-75, HWFET, US06, SC03 and Cold CVS-75. Based on these new test methods, this paper discusses the characteristics of driving condition on Hybrid electric vehicle (HEV). And this paper assesses the fuel economy label of HEV.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.517-525
• /
• 2011

In this study, the used DOCs, which could remove the air pollutants such as CO and HC in the exhaust gas from diesel vehicle, were remanufactured by various conditions. Their catalytic performances and characterization were also investigated. The remanufacturing process of the deactivated DOCs includes high temperature cleaning of incineration, ultrasonic cleaning for washing with acid/base solutions to remove deactivating materials deposited to the surface of the catalysts, and active component reimpregnation for reactivating catalytic activity of them. The catalytic performance tests of the remanufactured DOCs were carried out by the diesel engine dynamo systems and chassi dynamo systems in CVS-75 mode. All prepared catalysts were characterized by the optical microscopes, SEM, EDX, porosimeter and BET to investigate correlations between catalytic reactivity and surface characteristics of them. The remanufactured DOCs at various conditions showed the improved catalytic performances reaching to 90% of fresh DOC, which is attributed to remove the deactivating materials from the surface of the used DOC through the analysis of catalytic performance test and their characterization.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.35-42
• /
• 2001

The diesel engine exhaust gas is know as one of the causes to produce photochemical smog, which causes damage on environmental. However, due to the high thermal efficiency and low carbon dioxide emission, the usage of a diesel engine is prevailed. In this study, the DC non-thermal plasma technology used to the particulate matter (PM) aftertreatment. The exhaust gas characteristics and energy density were investigated on the dynamometer test bed and chassis dynamometer with CVS-75 mode in a passenger diesel car. It was reported that the smoke removal efficiency has around the 70% in the dynamometer test with 80W energy consumption and the PM removal efficiency has the 68% in the real car test. The NOx also reduced the 20% according to electrode type respectively. Considering these results, plasma technology is one of the ways to simultaneously removing method the particulate matter (PM) and NOx.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제3권1호
• /
• pp.75-83
• /
• 2000

저자들은 주기성 구토증으로 진단된 3명의 소아에서 6년 이상의 장기 추적관찰을 통하여 임상양상의 다양한 변화과정을 관찰하여 보고, 뇌파검사의 이상소견을 근거로 이형 편두통의 형태로 진행하여 가는 과정을 관찰하였다. 시간의 경과에 따라 구토 발병 주기, 기간의 변화와 함께 위배출능 저하, 두통의 발현, 뇌파의 이상 등 다양한 임상 양상의 변화를 보여주며, 2례에서는 증상의 소실이 관찰되었다. 특히, 뇌파 검사상 증상 발현시 발생하는 서파는 편두통의 발생 직전에 뇌혈류의 감소로 발생하는 양상과 매우 유사하며, 주기성 구토증과 편두통의 관련성을 시사하여 주는 소견으로, 진단 및 치료적 접근시 반드시 고려하여야 한다. 주기성 구통증은 이형 편두통으로의 이행 과정인가?

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.291-296
• /
• 2010

The purpose of this paper is to study the fuel economy improvement experimentally when the viscosity of engine oil is lowered. The emissions are measured for CVS-75 mode with SAE viscosity grades. The test results indicate that a close correlation has been found between the engine oil viscosity and the fuel economy. The lowering of engine oil viscosity causes the reduction of friction loss which has a very close relation with the fuel economy. These results as the lowering of engine oil viscosity will be a important factor for improvement of the fuel economy and reduction of the $CO_2$ emission.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.176-180
• /
• 2013

After-treatment apparatus ceramic DPF (diesel particulate filter) have been applied to reduce harmful particulate matters(PM) among emissions from diesel engines so far, but they are easy to be fragile and weak in thermal shock. This research aims to investigate a metal type filter which is superior in mechanical strength and heat conduction rate and is beneficial economically in manufacturing. Basic performance of metal DPF such asloading test, temperature gradient test, thermal shock test, heat resistant test and back pressure was carried out. And then their experimental data provided key informations in designing and manufacturing such as detailed structures of metal mesh filter. Also diesel engine and vehicle of 2957cc displacement was tested under lug-down 3 mode and CVS-75 mode. PM reduction efficiency was 54.5% using metal DPF without loss of performance and fuel consumption.

• 대한지역사회영양학회지
• /
• 제28권4호
• /
• pp.269-281
• /
• 2023

Objectives: This study aimed to examine the frequency of convenience food consumption at convenience stores (CVS) and the CVS usage patterns of middle and high school students as well as to understand students' attitude toward sodium and sugar reduction. Methods: We used an online questionnaire for data collection. The questionnaire comprised five distinct categories: general characteristics, CVS usage, frequency of consumption according to convenience food menus at CVS, attitude toward sodium and sugar reduction, and adherence to dietary guidelines. Results: A total of 75 students from Seoul (14 middle school students and 61 high school students) participated in the study. Most respondents visit CVS 3-5 times a week. CVS are predominantly used during weekdays, mostly during lunch, and dinner. The students mostly checked the caloric content and expiration date as food labeling information. The participants were aware of the need to reduce their sugar and sodium intake. Among frequent CVS convenience food consumers, there was an increased consideration of the need to reduce their sugar and sodium consumption, despite their actual selection of foods with high sugar and sodium content. Additionally, they did not check the sugar and sodium levels indicated in food labeling. Further, the dietary action guide from the Ministry of Health and Welfare were poorly followed by most students. Conclusions: There is a need for nutrition education specifically addressing the sugar and sodium content of the convenience foods predominantly consumed by students. Additionally, educating students with frequent convenience food consumption to actively check the sugar and sodium information on food labels could help promote healthier food choices.