• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.219-225
• /
• 2018

This study was carried out to investigate the injection characteristics of 800 kPa compressed natural gas compressed natural gas (CNG) injector developed in Korea. The CNG injector with multi-holes, employed in this experiment, was designed to inject CNG in the manifold at high pressure of 800 kPa. The spray macroscopic visualization test was carried out via Schlieren photography to study fuel-air mixing process. The fundamental spray characteristics, such as spray penetration, spray cone angle and spray velocity, were evaluated in the constant volume combustion chamber (CVCC) with varying the constant back pressure in CVCC from 0 to 1.8 bar. For the safety reason, nitrogen ($N_2$) and an acetone tracer were utilized as a surrogate gas fuel instead of CNG. The surrogate gas fuel pressures were controlled at 3, 5.5, and 8 bar, respectively. Injection durations were set at 5 ms throughout the experiment. The simulating events of the low engine speed were arranged at 1,000 rpm. The spray images were recorded by using a high-speed camera with a frame rate of 10,000 f/s at $512{\times}256pixels$. The spray characteristics were analyzed by using the image processing (Matlab). The results showed the significant difference that higher injection pressure had more effect on the spray shape than the lower injection pressure. When the injection pressure was increased, the longer spray penetration occurred. Moreover, the linear relation between speed and time are dependent on the injection pressure as well.

• 한국분무공학회지
• /
• 제17권4호
• /
• pp.178-184
• /
• 2012

The aim of this study was to compare the spray characteristics of a typical fuel (100% diesel, DME) and diesel-DME blended fuel in a constant volume combustion chamber (CVCC). The typical fuel (100% diesel, DME) and diesel-DME blended fuel spray characteristics were investigated at various ambient pressures (pressurized nitrogen) and fuel injection pressures using a common rail fuel injection system when the fuel mixture ratio was varied. The fuel injection quantity and spray characteristics were measured including spray shape, penetration length, and spray angle. Common types of injectors were used.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 1996년도 10월 학술대회지
• /
• pp.206-206
• /
• 1996

Previous studies of American English(e.g. Sussman 1991, 1993, 1994) CVC coarticulation with initial consonants representing the labial, alveolar, and velar showed a linear relationship that fits to data points formed by plotting onsets of F2 transition along the y-axis and their corresponding midvowel points along the x-axis. The present study extends the locus equation metric to include the following places of articulation:uvular, pharyngeal, laryngeal, and emphatics. The question of interest is to determine if locus equation could serve as phonetic descriptor for the place of articulation in Arabic. Five male native speakers of Colloquial Egyptian Arabic(CEA) read a list of 204 CVC and CVCC words, containing eight different places of articulation and eight vowels. Average of formant patterns(Fl,F2,F3) onsets, midpoints, and offsets were calculated, using wide band spectrograms obtained by means of the kay spectrograph model(7029), and plotted as locus equations. A summary of the acoustic properties of the place of articulation of CEA will be presented in the frames of bVC and CVb. Strong linear regression relationships were found for every place of articulation.

• 한국연소학회지
• /
• 제11권2호
• /
• pp.28-36
• /
• 2006

A constant volume combustion chamber was used to investigate the combustion characteristics. of homogeneous charge of methane-air mixture under various initial pressure, equivalence ratio and ignition times. The constant volume combustion chamber(CVCC) mostly has been studied by the experiments of visualization until now. So it is needed the numerical analysis of fluid and combustion characteristics in chamber by the more detail simulation. In this paper, the numerical analysis is tried to approach basically the homogeneous charge combustion phenomena under the various conditions, and the combustion phenomena in chamber is numerically analyzed by the commercial FIRE code. As a results, the combustion phenomena which were mean temperature, OH radical and reaction rate in chamber were investigated and it showed that the smallest flame growth occurs for the lean state and the increase of initial charged pressure condition due to the reduced OH radical.

• 인지과학
• /
• 제27권2호
• /
• pp.325-353
• /
• 2016

읽기의 초기 단계에서 처리되는 글자의 정보량을 지칭하는 시각 폭은 개별 글자의 획수가 증가하거나 폰트의 종류, 고정된 지면에서 차지하는 잉크의 면적, 글자 간의 간격과 같은 복잡성 요인들에 의해 영향을 받는다. 한글은 자음과 모음들이 조합되는 독특한 알파벳-음절 표기법을 사용하는 글자 체계를 가지고 있어 영어나 중국어를 중심으로 한 결과들에 비해, 자모구성의 글자 유형에 따라서도 복잡성이 달라질 수 있다는 특수성이 있다. 본 연구에서는 세 글자 쌍 패러다임을 이용하여 글자의 유형에 따라 한글 읽기 시각 폭의 크기가 영향을 받는지 살펴보았다. 그리고 여러 글자 유형의 시각 폭 중 읽기 능력의 개인차를 예측하는 글자 유형을 확인해보고자 시각 폭과 읽기 폭, 읽기 유창성, 읽기 이해와의 상관도 살펴보았다. 실험결과, 글자 유형이 복잡해질수록 글자 재인 정확률이 감소하고 시각 폭이 줄어드는 경향이 관찰되었으나 자음+모음+자음의 형태가 자음+모음 형태보다 글자 재인율이 높고 시각 폭도 큰 것으로 나타나 자모조합의 복잡성에 따른 영향이 선형적이지 않고 다른 요인이 개입할 가능성이 관찰되었다. 자음만 제시한 조건과 CV조건의 글자 재인율은 읽기 이해와 정적 상관을 보여 향후 읽기 능력과 관련한 시각 폭 측정 시 사용할 수 있는 글자 유형으로 나타났다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.166-170
• /
• 2010

토치 점화 장치의 연소 특성을 파악하기 위하여 6개의 각기 다른 토치 점화 장치를 설계하였다. 토치 점화장치의 체적이 메탄의 연소특성에 미치는 영향을 파악하기 위하여, 토치점화 장치의 높이(h)와 오리피스 직경(De)는 10mm와 6mm로 고정하고, 입구 직경(D)을 12mm에서 22mm까지 2mm씩 증가시키며 토치 점화 장치를 설계하였다. 초기 화염 생성 및 전파는 질량 연소율과 연소 촉진율로 분석하였다. 질량 연소율과 연소 촉진율을 계산하기 위하여 정적 연소실 내의 평균 압력을 측정하였다. 또한 shadow graph법을 이용하여, 초기 화염 생성과 화염 전파과정 전 영역을 가시화하였다. 토치 점화 장치를 사용한 경우에는 일반적인 스파크 점화와 비교하여 질량 연소율의 기울기가 증가하였고, 연소 촉진율도 개선된것을 확인하였다. 토치 점화 장치의 체적이 증가할수록 연소가 개선되었으며, 넓은 점화 표면을 제공하였다.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.181-188
• /
• 2004

A cylindrical constant-volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of an inhomogeneous charge methane-air mixture under several parameters such as stratified pattern, initial charge pressure, ignition time and the excess air ratio of the initial charge mixture. Flow characteristics including mean velocity and turbulence intensity were analyzed by a hot-wire anemometer. The combustion pressure development, measured by a piezo-electric pressure transducer, was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to near-zero value at 3000 ms. For the stratified patterns, the combustion rate under the rich injection (RI) condition was the fastest. Under the initial charge conditions, the second mixture was accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the combustion rate.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.629-634
• /
• 2010

천연가스는 최근 세계적으로 강화되고 있는 배기가스 규제를 만족시키기 위한 연료이다. 가스엔진개발에 있어 적은 배기가스와 보다나은 연료 소비효율이 요구되고 있다. 본 연구는 정적연소기 내에서 예연소실 설계 형상인자와 당량비에 따른 연소 특성을 연구하는데 초점을 맞추었다. 특히 예연소실 설계인자 중 오리피스 직경, 체적비와 당량비가 연소 최대압력과 질량연소분율에 미치는 영향에 대하여 연구 하였다. 본 논문은 예연소실 설계인자에 따른 연소 특성을 분석하여, 최적의 예연소실 설계인자를 제공하는 것을 목적으로 하고 있다.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.323-332
• /
• 2005

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of a homogeneous charged methane-air mixture under various overall charge pressures, excess air ratios and ignition times. The flow characteristics, including the mean velocity and turbulence intensity, were analyzed with a hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer, a flame propagation image acquired by ICCD camera and exhaust emissions measured by 2-valve gas chromatography were used to investigate effects of initial pressures, excess air ratios and ignition times on the combustion characteristics. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to a near-zero value after 3000 ms and that the combustion duration was shorten and the flame speed and laminar burning velocity had the highest value under the condition of an excess air ratio of 1.1, an overall charge pressure of 0.15 MPa and an ignition time of 300 ms in the present study. The $CO_2$ concentration was proportional to the ignition time and overall charge pressure, the $CO_2$ concentration was proportional to the excess air ratio, and the UHC concentration was inversely proportional to the ignition time and overall charge pressure.

• Journal of Microbiology and Biotechnology
• /
• 제26권7호
• /
• pp.1173-1181
• /
• 2016

Salmonella spp. are gram-negative flagellated bacteria that cause a variety of diseases in humans and animals, ranging from mild gastroenteritis to severe systemic infection. To explore development of a potent vaccine against Salmonella infections, the gene encoding outer membrane protein L (ompL) was inserted into the swinepox virus (SPV) genome by homologous recombination. PCR, western blot, and immunofluorescence assays were used to verify the recombinant swinepox virus rSPV-OmpL. The immune responses and protection efficacy of rSPV-OmpL were assessed in a mouse model. Forty mice were assigned to four groups, which were immunized with rSPV-OmpL, inactive Salmonella (positive control), wild-type SPV (wtSPV; negative control), or PBS (challenge control), respectively. The OmpL-specific antibody in the rSPV-OmpL-immunized group increased dramatically and continuously over time post-vaccination, and was present at a significantly higher level than in the positive control group (p < 0.05). The concentrations of IFN-γ and IL-4, which represent Th1-type and Th2-type cytokine responses, were significantly higher (p < 0.05) in the rSPV-OmpL-vaccinated group than in the other three groups. After intraperitoneal challenge with a lethal dose of Salmonella typhimurium CVCC542, eight out of ten mice in the rSPV-OmpL-vaccinated group were protected, whereas all the mice in the negative control and challenge control groups died within 3 days. Passive immune protection assays showed that hyperimmune sera against OmpL could provide mice with effective protection against challenge from S. typhimurium. The recombinant swinepox virus rSPV-OmpL might serve as a promising vaccine against Salmonella infection.