• Safety and Health at Work
• /
• 제3권1호
• /
• pp.22-30
• /
• 2012

Objectives: To challenge the problem of slipperiness, various slipmeters have been developed to assess slip hazard. The performance of in-situ slipmeter is, however, still unclear under the various floor conditions. The main objectives of this study were to evaluate the performance of three kinds of slipmeters under real conditions, and to find their dynamic and kinematic characteristics, which were compared with gait test results. Methods: Four common restaurant floor materials were tested under five contaminants. Slipmeters and human gaits were measured by high speed camera and force plate to find and compare their dynamic and kinematic characteristics. Results: The contact pressures and built-up ratio were below those of subjects. The sliding velocity of British Pendulum Tester was above those of subjects, while those of BOT-3000 and English XL were below those of subjects. From the three meters, the English XL showed the highest overall correlation coefficient (r = 0.964) between slip index and $R_a$, while the rest did not show statistical significance with surface roughness parameters ($R_a$, $R_z$). The English XL only showed statistical significance (p < 0.01) between slip index and contaminants. The static coefficient of friction obtained with the BOT-3000 showed good consistency and repeatability (CV < 0.1) as compared to the results for the BPT (CV > 0.2) and English XL (CV < 0.2). Conclusion: It is unclear whether surface roughness can be a reliable and objective indicator of the friction coefficient under real floor conditions, and the viscosity of contaminants can affect the friction coefficient of the same floors. Therefore, to evaluate slipperiness, the performance of the slipmeters needed to improve.

• 방사선산업학회지
• /
• 제10권1호
• /
• pp.13-20
• /
• 2016

In order to identification of the possibility of manufacturing soybean paste (doenjang) with soybean mutant lines induced from gamma-ray mutagenesis, this study was performed to investigate the quality characteristics of doenjang using two soybean mutant lines, Baekwon-1 (BW-1) and Baekwon-2 (BW-2) and their original cultivar (cv. Baekwon, BW) for 8 weeks. The BW and two mutant lines (BW-1 and BW-2) were showed higher content of amino type nitrogen than control (cv. Taegwang). The pH decreased and the titratable acidity increased all the samples during aging period. The lightness, redness and yellowness of doenjang were the lowest in BW. Total free sugar content of doenjang was the highest in control (10.43%) after 4 weeks and composed mainly fructose and glucose. The order of the free amino acid content was Glutamic acid>Leucine>Lysine>Phenylalanine>Aspartic acid in control, Glutamic acid>Leucine>Arginine>Lysine>Phenylalanine in BW, Glutamic acid>Lysine>Phenylalanine>Aspartic acid>Valine in BW-1 and Glutamic acid>Arginine>Lysine>Phenylalanine>Aspartic acid in BW-2, respectively. Our results showed that it is possible to increase the quality of doenjang using soybean mutant lines in manufacturing soybean paste.

• 대한의용생체공학회:의공학회지
• /
• 제44권5호
• /
• pp.336-345
• /
• 2023

The present study was designed to evaluate changes in neuromuscular properties and the structural and qualitative characteristics of muscles during submaximal isometric contractions at low-to-relatively vigorous target forces and to determine their influence on force steadiness (FS). Thirteen young adult males performed submaximal isometric knee extensions at 10, 20, 50, and 70% of their maximal voluntary isometric contraction using their non-dominant legs. During submaximal contractions, we recorded force, EMG signals from vastus medialis (VM), vastus lateralis (VL), and rectus femoris (RF), and ultrasound images from the distal RF (dRF). Force and EMG standard deviation (SD) and coefficient of variation (CV) values were used to measure FS and EMG steadiness, respectively. Muscle thickness (MT), pennation angle (PA), echo intensity (EI), and texture features were calculated from ultrasound images to assess the structural and qualitative characteristics of the muscle. FS, neuromuscular properties, and texture features showed significant differences across different force levels. Additionally, there were significant differences in EMG_CV among the quadriceps at the 50% and 70% force levels. The results of correlation analysis revealed that FS had a significant relationship with EMG_CV in VM, VL, and RF, as well as with the texture features of dRF. This study's findings demonstrate that EMG steadiness and texture features are influenced by the magnitude of the target force and are closely related to FS, indicating their potential contribution to force output control.

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.131-138
• /
• 2023

The carbon felt is usually hired as electrodes for vanadium redox flow battery (VRFB). In the study, surface modification of carbon felt under CO₂ atmosphere with variables of operating various temperature ranges between 700℃ and 900℃. The qualitative and quantitative analysis were carried out such as scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) to observe degree of surface modification. Result of XPS analysis confirmed increase of carbon and oxidation functional group on the surface with increase of temperature. SEM image was discovered similar phenomena. Electrochemical characteristics such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed the improved electrode performance with increase of temperature. However, the electrochemical performance under treatments temperature of 900℃ was less than that of under treatment temperature of 850℃ due to weight loss at the treatment temperature of 900℃. From the CV and EIS results, the best electrochemical characteristics was at the temperature of 850℃. That of at the temperature of 900℃ was decreased due to weight loss. The energy efficiencies (EE) obtained from full cell test were 69.37, 80.76, 82.45, and 75.47%, at the temperature of 700, 800, 850, and 900℃, respectively.

• 한국작물학회지
• /
• 제50권spc1호
• /
• pp.94-98
• /
• 2005

경북 지역 농업기후 지대를 미질 및 식미치를 근거로 하여 다시 세분화된 지대를 설정하고자 2002년부터 2004년까지 3년간 경북 전 지역에서 가장 많이 재배되고 있는 품종 중 중만생종인 일품벼, 주남벼, 남평벼, 중생종인 화영벼, 조생종인 오대벼를 재배하고 있는 논 513개소의 쌀을 수집하여 분석 조사한 결과를 요약하면 다음과 같다. 1. 지대별 식미치의 평균은 동해안 남부지대가 67.6로 다른 지대에 비해 약간 낮았으며, 완전미 비율은 동해안 남부지대 및 동해안 중부지대가 각각 $87.3\%,\;88.2\%$로 낮았으며 변이계수도 각각 $8.2\~8.3\%$로 높았다. 단백질 함량은 동해안 중부지대가 $8.0\%$로 다른 지대에 비해 약간 높았고, 변이계수도 $8.8\%$ 높았다. 2. 특정지역을 세분하여 쌀 품질을 조사해보면 전체 평균의 변이계수보다 높게 나타나는 지역과 낮게 나타나는 지역으로 뚜렷하게 구분된다. 변이 계수가 크다는 것은 특정 지역 내에서도 쌀 품질의 세분화된 지역간 차이가 심하므로 고품질 쌀 생산을 위해서는 세분화된 벼 재배 구역 설정하여 적지적작의 정밀농업이 필요하였다. 3. 식미치를 근거로 세분화된 지대의 쌀 품질 요인에 대한 연차 간 변이계수는 기존 농업기후지대의 변이계수보다 상당히 낮아져, 세분화된 지대별 고품질 쌀 생산을 위한 특정 지역의 정밀 기술 개발 및 보급의 기초 자료로 활용할 수 있을 것으로 사료되었다.

• 한국농공학회논문집
• /
• 제58권1호
• /
• pp.27-38
• /
• 2016

More severe and frequent flood and drought have increased the attentions on the river management. In particular, baseflow is an important element among many streamflow characteristics because streamflow is mainly consisted of direct runoff and baseflow. In this regard, this study attempted to analyze the relationship between streamflow variability and baseflow contributions on Nakdong river basin. For this, two Streamflow Variability Indices (SVI) were used: Coefficient of Variation (CV) and Coefficient of Flow Regime (CFR). Furthermore, baselow separation was individually conducted by three methods (PART, WHAT and BFLOW), and based on this, Baseflow Index (BFI) was calculated. Also, we used the daily streamflow data retrieved from 27 gauge stations in Nakdong river basin for baseflow separation. The results showed that BFI calculated by three models ranges from 0.14 to 0.90 for 27 gauge stations. For SVI, BFI has much higher correlation with CV than with CFR. Also, the inversely proportional relationship between BFI and CV showed that higher baseflow contribution, less streamflow variability.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.93-100
• /
• 2013

Generally, the conventional battery charging system using an analog method has the large, heavy hardware and low efficiency. Also, it has the disadvantage that it is necessary to replace the control circuit on the basis of the characteristic curve of the specific battery cell. The proposed programmable digital LLC resonant charging system use high efficiency control system(CC-CV), and has characteristic a small hardware and advantage that a digital programming of the voltage, current, and battery capacity characteristics can be flexible. The system proposed the use of Half-bridge LLC resonant converter is possible to improve efficiency and reduce switching losses by using ZVS topology. Further, a constant voltage - constant current(CC-CV) control algorithm apply to the charger which using a buck converter. The performance of the proposed system is demonstrated through experiments.

• 대한임베디드공학회논문지
• /
• 제11권5호
• /
• pp.305-312
• /
• 2016

Modern embedded systems are typically operated by the rechargeable batteries in our daily life. Since charge of batteries is considered as an time consuming task, there have been extensive efforts to manage the charge time from the perspective of materials, circuits, and systems. Estimation of battery charge time is one of the essential information to design the charge circuitry. A compact macro model for the constant-current and constant-voltage charge protocol was recently introduced, which gives us a quick estimation of charge time with similar shape to the famous Peukert's law for discharge time estimation. The CC-CV charging protocol is widely used for Lithium-based batteries and Lead-acid batteries. In this paper, we characterize the lead-acid battery by measurement to extract the model coefficients, which was not covered by the previous studies. By our proposed model, the key coefficient Kcc results in 1.18-1.31, which is little bit higher than that of Lithium batteries. The accuracy of our model is within the range of ${\pm}10%$ error, which is compatible with the other studies such as Peukert's law.

• 분석과학
• /
• 제8권4호
• /
• pp.597-601
• /
• 1995

The transfer of chloride ion across an anion exchange membrane (AEM) was investigated by cyclic voltammetry (CV) and electrochemical impedance spectra. In CV experiment, when the size of the hole in membrane was much smaller than the distance between membrane holes, the Cl anion transfer showed steady state voltammetric behavior. Each hole in membrane can be regarded as a microelectrode and the membrane was equivalent to a microelectrode array in this condition. When the hole in membrane was large or the distance between membrane holes was small, the CV curve of the Cl anion transfer across membrane showed peak shape, which attributed to linear diffusion. In ac impedance measurement, the impedance spectrum of the membrane system was composed of two semicircles at low de bias, corresponding to the bulk characteristics of the membrane and the kinetic process of ion transfer, respectively. The bulk membrane resistance increases with increasing dc bias and only one semicircle was observed at higher dc bias. The parameters related to kinetic and membrane properties were discussed.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1109-1116
• /
• 2017

Wireless power transfer (WPT) technology has the advantages of intelligence and facilitation. This paper designs a WPT system applied to battery charging and provides a strategy which switches from the constant current (CC) charging mode to constant voltage (CV) charging mode. The LCL-LCL topology is used to realize the CC output, while the LCL-S (series compensation) topology is used to realize the CV output. The main factor affecting the output characteristics is extracted by analyzing the two topologies above. Based on the main factor, this paper puts forward a modified way to design the system. In addition, on-line monitors for the battery and switches are placed at receiving side, which avoids the need for introducing an information interaction module into the system. Therefore, the complexity of the controlling system is reduced. Finally, simulation and experimental analyses are carried out to verify the correctness of the compound topologies.