• Korean Journal of Medicinal Crop Science
• /
• 제13권1호
• /
• pp.17-20
• /
• 2005

Natural products has been occasionally used in place of growth regulators to control lateral root formation and growth of soybean sprouts. The study was done to measure the effects of treatment concentration of hard rubber tree (Eucommia ulmoides Oliver) leaf extract on lateral root formation, growth and morphological characters of the sprouts. Seeds of three cultivars, Pungsannamulkong, Sowonkong and Junjery, were imbibed for 5 hours into water, its 5 and 10% solutions immediately before 6 day culture. The cultured sprouts were classified into 4 categories to calculate their composition rates on the base of hypocotyl lengths; >7 cm (A),4 to 7 cm (B),<4 cm (C) and not germinated (D), and their morphological characters, fresh and dry weights were measured. Rate of A was decreased with increased concentrations, while that of C showed reverse result compared to A. Regardless of concentrations, the former rate was less in cv. Junjery than in cv. Pungsannamulkong and Sowonkong than in cv. Junjery although the latter rate was truly opposite to the former one. In 10% treatment concentration, lateral roots were less formed in cv. Junjery although nearly formed in cv. Pungsannamulkong and Sowonkong. In all the 3 cultivars, lateral roots per sprouts were decreased with increased treatment concentration. shorter and thicker sprout was observed in cv. Junjery than in the other cultivars, and in increased concentrations compared to relatively lower ones. Total fresh weight was the greatest in cv. Sowonkong due to mainly increment of its hypocotyl, but was reduced with increased concentration due to mainly decrement of hypocotyl in all the cultivars.

• The Journal of Korean Medicine
• /
• 제19권2호
• /
• pp.5-16
• /
• 1998

Hwabyung is a common emotional disorder which has symptoms expressed like firt's explosion in middle-aged after long period of emotional suppression among Koreans. It is similar in its characteristics such as neurosis, anxiety, panic attacks in Western Medicine, though the treatment method was not effective. So we have done a clinical research on Oriental Medical Method, especially on Acupuncture Therapy, and obtained following results. 1. Patients with Hwabyung complained of pressure pain around the Chunjung(?中, CV-17) point distinctively. About 70% of those were located on the CV-17 point, 25% were 1cm upper than the CV-17 point and 5% of those were 1cm lower point than the CV-17 point. 2. Degrees of pressure pain were divided into 5 grades from ade 1(feeling pain with slight pressure) to grade 5(feeling no pain with severe pressure), respectively. 3. Patients with Hwabyung showed various symptoms compared to fire's explosion such as anger, chest discomfort, difficulty in breathing. tachycardia. and feeling of epigasfric mass etc., and the degrees were divided into 5 grades according to the severities from grade 1(can't keep their usual living) to grade 5(no complaints with heavy stresses), respectively. 4. For the treatment of Hwabyung in this study, we had given Acupuncture therapy on some points such as Chunjung:?中:CV-17, Jungwan:中脘:CV-12) and Chunchu:天樞:S-25, etc. for 15 minutes a time twice a week. And Bunshimkiumgmnihang(分心氣飮加味方) was administered 3 times a day. 5. About 40% of the patients took treatment for more than 2 months, 29% of those took 1 to 2 months and 31% of those took less than 1 month. In this study, we excluded those who stopped treatment within a month without any expected effects. 6. We evaluated the changes of severity of pain according to the following categories such as - for no change, + for 1 grade, ++ for 2 grades, +++ for 3 grades, and ++++ for 4 grades of improvements. Among the patients taken 1 to 2 months of treatment. 48% of the those showed +, 7% of those showed ++, 3% of those showed +++ and 41% of those showed no change. Among the patients taken less than 2 months of treatment, 20%of those showed +, 40% of those showed ++, 28% of those showed +++ and 13% of those showed no change. 7. We evaluate the changes of symptoms according to the following categories such as - for no change, + for 1 grade, ++ for 2 grades, +++ for 3 grades and +++ for 4 grades of improvements. Among the patients taken 1 to 2 months of treatment, 34% of those showed +, 14% of those showed ++ and 52% of those showed no change. Among the patients taken more than 2 months of treatment, 20% of those showed +, 43% of those showed 20% of those showed +++, 3% of those showed +++ and 15% of those showed no change. 8. When we compare the changes of pain and symptoms according to the periods of treatment, the changes in quantity of pain in 1 to 2 months group was $0.72{\pm}0.75$, in more than 2 months group was $1.83{\pm}0.98$, and the changes in quantity of symptoms in 1 to 2 months group was $0.62{\pm}0.73$, in more than 2 months group was $1.75{\pm}1.03$. According to the above results, we have concluded that more than 2 months of treatment is more beneficial than 1 to 2 months of treatment.

• Journal of the Korean Society of Industry Convergence
• /
• 제20권1호
• /
• pp.56-66
• /
• 2017

In this experimental study, it is designed and used the test engine bed which is installed with the exhaust gas recirculation, and in addition to equipped using by oxygen adder. It has been tested and analyzed the combustion and emission characteristics, cycle variability and engine performance by controlling the oxygen volume fraction, EGR rate, engine speed and equivalence ratio.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.861-865
• /
• 2001

Generally the noise and vibration characteristics of 4WD vehicle is closely related to the characteristics of driveline such as bending mode, torsional mode, unbalance and nonuniformity of propeller shaft. In this paper the 4WD vehicle which has body vibration problem in high speed driving condition was tested. The sources of the body vibration and its transfer path are investigated by experimental approach. According to the experimental assessment, the body vibration is caused by the nonuniformity of joint of propeller shaft. And this paper presents a kinematic model of a vehicle driveline for the optimization of a driveline characteristics. Finally the optimized result of the drive line has been verified through the experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권9호
• /
• pp.436-443
• /
• 2017

Recently, the development of new energy technologies has become a hot topic due to problems,such as global warming. Unlike renewable energy technologies, such as solar energy generation, solar power, and wind power, which are optimized to achieve medium or above output power, the output power of energy harvesting technology is very small and has not received much attention. On the other hand, as the mobile industry has been revitalized recently, the utility of energy harvesting technology has been reevaluated. In addition, the technology of tracking the maximum power point has been actively researched. This paper proposes a new MPPT(Maximum Power Point Tracking) control method for a TEM(thermoelectric module) for load resistance. The V-I curve characteristics and internal resistance of TEM were analyzed and the conventional MPPT control methods were compared. The P&O(Perturbation and Observation) control method is more accurate, but it is less economical than the CV (Constant Voltage)control method because it usestwo sensors to measure the voltage and current source. The CV control method is superior to the P&O control method in economic aspects because it uses only one voltage sensor but the MPP is not matched precisely. In this paper, a method wasdesigned to track the MPP of TEM combining the advantages of the two control method. The proposed MPPT control method wasverified by PSIM simulation and H/W implementation.

• Journal of Sericultural and Entomological Science
• /
• 제51권1호
• /
• pp.20-29
• /
• 2013

Countries of the world are competing for the collection and utilization of genetic resources, which is a resource of value-added industrialization. We are building database of silkworm and mulberry resources with morphological, genetic characteristics data etc. Moreover, recent bioactive compound has been receiving increasing attention. So we analyzed 1-deoxynojirimycin(1-DNJ) content as a this item in addition to the basic information using 363 strains(varieties) of mulberry genetic resources. They were grown under the same environment and conditions. Mulberry leaves were collected and then freeze-dried and powdered for 1-DNJ test. As a result, 1-DNJ mean content of 363 mulberry strains was $0.176{\pm}0.077%$, and the coefficient of variation (CV) was 43.5%. The variation between the strains was greatly severe. Among the tested strains, 'C1D89/29' was showed the highest content of 0.47%, whereas 'Pumbo 24' and 'Turkey E' were showed the lowest content of 0.05% respectively. The content of 1-DNJ of 16 mulberry varieties for silkworm rearing were compared. Average concentration was $0.17{\pm}0.04%$, and the coefficient of variation (CV) was 22.8%. Variation among cultivars was not significant. Finally we selected 1-DNJ high-containing 11 strains. They are as follows. 'C1D89/29', 'Hiihak', 'Jeokasibmunja', 'Gweonchil', 'Botongsibmunja', 'Jeokchuk', 'bulguksang', 'Geunsookgojo', 'Busanggeum', 'Guksang 20' and 'Taekwang' which are more than twice of the overall average content.

• Journal of Energy Engineering
• /
• 제24권3호
• /
• pp.89-95
• /
• 2015

Carbon felts manufactured by (Co)CNF were subjected to heat treatment under different temperatures to use for the electrode of a redox-flow battery. BET and weight loss were tested to investigate the physical properties of the carbon felt according to the heat treatment conditions. SEM and XPS were also analyzed to characterize their surface area. In addition, electrical resistance, CV (cyclic voltammetry) and RFB charge on the electrode properties were examined in accordance with the heat treatment conditions with the discharge performance. The changes of physical properties on the carbon felt surface was confirmed via SEM and BET analysis, The most addition of oxygen functional groups on the carbon felt surface was obtained when one hour heat treatment at $550^{\circ}C$ and it was confirmed by XPS analysis. After resulting the CV tests, the active area of the electrode was the largest at $550^{\circ}C$ heat treatment. The heat treatment experiment of vanadium redox flow battery using the carbon felts were tested at $400^{\circ}C$, $500^{\circ}C$ and $550^{\circ}C$. As a result, the charge-discharge energy efficiency of the heat treatment electrode was 72.9% and 79.8%, at $400^{\circ}C$ and $500^{\circ}C$, respectively. The efficiency of the heat treatment electrode at $550^{\circ}C$ was the best as 79.8% at $550^{\circ}C$.

• The Korean Journal of Pesticide Science
• /
• 제13권1호
• /
• pp.13-20
• /
• 2009

Two insecticides, commonly used for Chinese cabbage, etofenprox and methoxyfenozide, were subjected to a field residue trial to evaluate safeties of the residues at harvest. The pesticides were sprayed onto the crop at recommended and double doses 10 days before the prearranged harvest and then sampling was done at 0, 1, 2, 3, 5, 7, 10, and 12 days after spraying. The amounts of pesticides residues in the crop were analyzed by chromatographic methods. Limits of detection (LODs) of both etofenprox and methoxyfenozide were $0.01mg\;kg^{-1}$ and mean recoveries were $96.76{\pm}2.67$ (CV=2.76%) and $95.84{\pm}2.57%$(CV=2.69%) in case of etofenprox and $103.26{\pm}3.21$ (CV=3.11%) and $94.50{\pm}1.35%$(CV=1.43%) in case of methoxyfenozide, respectively. Biological half-lives of etofenprox and methoxyfenozide were 3.2 and 3.5 days at the recommended dose and 2.7 and 3.5 days at the double dose, respectively. Initial residue levels of the pesticides at the recommended and double doses exceeded their MRLs, but final residue levels of the pesticides in the crop samples at harvest were less than their MRLs. The ratios of the EDI to ADI by intake the crop harvested 10 days after spraying were less than 4% of their ADIs, representing that residue levels of two pesticides at harvest were evaluated as safe.

• Korean Journal of Plant Resources
• /
• 제18권3호
• /
• pp.359-366
• /
• 2005

Effects of neutron beam irradiation on seed germination, growth and RAPD pattern of tobacco (Nicotiana tabacum L. cv.; N. plumbaginifolia) and rice (Orya sativa L. cv.) plants were estimated. Seed germination rate was not significantly changed by the neutron beam treatment in both tobacco and rice seeds. And there was no significant differance in growth of the plants by the neutron beam treatment. Interestingly, however, some of morphological changes, including leaf shape (about $36\%$), stem color and leaf color were observed in neutron beam treated tobacco plants. In addition, abnormal flower in petal was observed in the neutron beam treated plant. This results indicate that neutron beam is able to use as an effective mutagen in plant mutations. Scorable products from 20 primers were obtained by RAPD analysis in the leaves of the beam irradiated tobacco plants and most of the plants showed the similar band patterns.

• Korean Journal of Applied Biomechanics
• /
• 제17권4호
• /
• pp.115-125
• /
• 2007

Grould Reaction force(GRF) is important in human movements and GRF measurements are one of the most frequently used tool in biomechanical studies. In the studies of the golf swing motion, people refer to GRF as weight transfer. A successful golf swing motion requires many segments activation sequences which are controled by the nerve system. Due to the inter- and intra-individual variability of the human movement and the movement strategies, reliability of the measurements are important in human movement studies. Previous golf researches were based on group studies and certain events' values were analyzed. The purposes of this study were to determine the number of trials for the reliable golf swing GRF data collection, to reveal the variability level of the meaningful components of the golf swing GRF, and to classify the types of the golf swing GRF patterns. Twenty three male professional golfers($26.4{\pm}6.6$ years, $174.3{\pm}5.2\;cm$, $71.3{\pm}6.5\;kg$) signed an informed consent form prior to participation in this study. GRFs of driver swings were collected with Kistler 9285 force platform and 9865A amplifier, and calculated by the KwonGRF program(Visol, Korea). Sampling frequency was 1080 Hz. GRF data were trimmed from 1.5 s prior to the impact to 0.5 s after the impact. The number of trials for the reliable GRF collection was determined when the change in floating mean overs the 25 % of the standard deviation of that variable. Variabilities of the variables were determined by the coefficient of variation(CV) of 10 %. The types of GRF patterns were determined by visual inspection of the peak GRF shapes. The minimum number of trials for the reliable golf swing GRF data collection was five. Ten-trial seems more conservative. The value of the peak GRF was more reliable than the value of the impact GRF. The CV of the peak GRF and impact GRF were 7.4 %, 15.2 %, respectively. Because of the +/- sigh of the peak GRF appearance time, it was impossible to calculate CV of the peak GRF appearance time. Golf swing GRF patterns were classified as sing peak type, double peak type, and plateau peak type. This classification suggests the presence of the different golf swing weight transfer strategies.