• 제목/요약/키워드: CT number

검색결과 596건 처리시간 0.023초

화합물의 물리적 밀도와 유효원자번호에 대한 CT수 측정 (Measurement of CT Numbers for Effective Atomic Number And Physical Density of Compound)

  • 김종언
    • 한국방사선학회논문지
    • /
    • 제15권2호
    • /
    • pp.125-130
    • /
    • 2021
  • AAPM CT 성능 팬텀에서 CT수 교정 삽입부의 각 핀과 물에 대응하는 유효원자번호 및 물리적 밀도에 대한 CT수에 관한 자료가 거의 없다. 따라서 자료화의 필요성이 제기되었다. 이 연구의 목적은 AAPM CT 성능 팬텀에서 CT수 교정 삽입부의 각 핀 및 물에 대하여 유효원자번호를 산출하고, 산출된 유효원자번호 및 물리적 밀도에 대한 CT수를 측정하여 비교분석하는데 있다. AAPM CT 성능 팬텀의 CT수 교정 삽입부에서 각 핀과 물의 유효원자번호 및 물리적 밀도에 관한 CT수의 자료를 획득하기 위하여, 먼저 각 핀과 물에 대한 유효원자번호를 산출하였다. 그리고 CT스캐너로 CT수 교정 삽입부를 스캔하여 CT슬라이스들을 획득하였다. 중심 CT슬라이스에서 각 핀과 물에 대하여 CT수들을 측정하였다. 결과로서, 유효원자번호에 대한 CT수들은 유효원자번호가 증가할수록 비선형적으로 증가와 감소를 반복하는 양상을 나타내었다. 그리고 물리적 밀도에 대한 CT수들도 물리적 밀도가 증가할수록 비선형적으로 증가와 감소를 반복하는 양상을 나타내었다.

방사선치료용 CT simulator와 진단용 CT의 구조 차이에 의한 CT number의 비교 평가 (Evaluation of CT Number Difference between Radiation Therapeutic CT Simulator and Conventional CT)

  • 서정민;임재동;김찬형
    • 대한안전경영과학회지
    • /
    • 제17권3호
    • /
    • pp.215-219
    • /
    • 2015
  • The purpose in this study is to investigate CT number difference between conventional CT and CT simulator. It shows good correlation in CT number on the muscle, bone, and air. However, in the liver, lungs and water, the low correlation was detected. This result can become the good index for the direction of the distribution of dose difference research between CT equipment for using the computerized radiation therapy planning system.

CT 기종에 따른 CT 수의 변화가 선량계산에 미치는 영향 (The Effect of the CT Number for Each CT on Dose Calculation)

  • 조광환;이석;조삼주;임상욱;허현도;민철기;조병철;김용호;최두호;김은석;권수일
    • 한국의학물리학회지:의학물리
    • /
    • 제16권4호
    • /
    • pp.161-165
    • /
    • 2005
  • CT 기종에 따라서 전자밀도에 대응하는 CT 수의 변화와 치료계획 시 선량계산에 미치는 영향을 분석하였다. 5종의 CT를 이용하여 전자밀도 교정 팬톰의 영상을 얻어 기종에 따른 CT 수의 변화를 알아보았다. 조직등가물질의 밀도에서 CT 수는 ${\pm}2\%$ 내의 차이를 보였으나 밀도가 큰 영역에서는 최대 $9.5\%$의 차이를 나타냈다. CT 수의 변화가 치료계획의 선량계산에 미치는 영향을 알아보기 위하여 환자의 흉부 영상을 이용하여 장기별로 선량의 차이를 분석한 결과 최대 $0.48\%$로 거의 차이를 보이지 않았다. 밀도가 큰 물질이 인체 내에 삽입되어 있을 경우를 가정하여 물팬톰에 CT 수가 2,000인 고밀도 물질을 삽입한 팬톰 영상을 치료계획장치에 그려 넣었다. 고밀도 물질 아래 20 cm 깊이에서 선량 계산을 비교한 결과 $2.1\%$의 차이를 보였다. 치료계획 단계에서 선량 불확도를 최소화하기 위해서는 사용되는 CT 기종에 따른 CT수와 전자밀도의 정확한 환산이 필요하며, 특히 한 기관에서 여러 종류의 CT를 이용하는 경우 각 CT 별로 전자밀도에 대응하는 CT 수를 입력하고 서로 구별하여 사용하여야한다. 또한 CT수의 재현성을 확인하기 위해 주기적인 점검이 요구된다.

  • PDF

CT 영상기반 방사선치료계획시스템을 위한 CT수 대 물리적 밀도 변환에 관한 CT 스캐닝 매개변수의 의존성 (The Dependence of CT Scanning Parameters on CT Number to Physical Density Conversion for CT Image Based Radiation Treatment Planning System)

  • 백민규;김종언
    • 한국방사선학회논문지
    • /
    • 제11권6호
    • /
    • pp.501-508
    • /
    • 2017
  • 방사선치료에 사용하는 CT 스캐너에 의해 획득된 CT 및 CBCT 전자밀도팬텀의 CT영상부터 CT수 대 물리적 밀도 변환에 관한 CT 스캐닝 매개변수의 의존성은 실험으로 분석하였다. CT수는 관전류량, 슬라이스 두께, 영상재구성 필터, 시야 그리고 팬텀 용적의 크기에 대해 의존하지 않았다. 그러나 CT수는 관전압과 팬텀 횡단면적 크기에 의존하였다. 결과로서, 물리적 밀도 1이상의 범위에 대하여, 90과 120 kVp 사이의 관전압에서 관측된 최대 CT수 차이는 27%이었고, 그리고 CT 몸통과 머리 전자밀도팬텀 사이에서 관측된 최대 CT수 차이는 15%이었다.

3D 프린팅을 사용한 Infill 조절에 따른 Elbow 팬텀 제작 및 유용성 평가에 관한 연구 (A Study on Elbow Phantom Production and Usability Evaluation by Adjusting Infill Density using 3D Printing)

  • 김명인;지승호;위현섭;이대원;장희민;윤명성;한동균
    • 한국방사선학회논문지
    • /
    • 제17권6호
    • /
    • pp.929-937
    • /
    • 2023
  • 3D 프린터를 이용하여 제작되는 인체 등가 팬텀은 기존의 인체 팬텀에 비해 저렴하고 단시간에 제작이 가능하다. 다만, 3D 프린터 출력 설정 변수 중 하나인 내부채움(Infill Density)을 100 % 미만으로 하여 제작되는 팬텀이 다수이다. 따라서 본 연구는 3D 프린터를 이용하여 제작된 다섯 개의 Infill 비율을 달리한 Bone 팬텀의 CT number를 실제 인체 Bone의 CT number와 비교하였다. 또한, Infill 100 %의 팔굽 관절 팬텀을 제작하여 컴퓨터 단층촬영(CT)에서 각 조직 별 CT number 비교를 통해 Infill을 100 %로 설정하여 제작된 팬텀에 대한 유용성을 평가하였다. 그 결과 Infill 100 %로 출력한 Bone 팬텀이 실제 인체 Bone의 CT number 값과 가장 통계적으로 유의한 차이를 보이지 않았고, Infill 100 %로 제작된 팔굽 관절 팬텀 역시 각 조직의 CT number는 실제 인체 팔굽 관절의 각 조직의 CT number 값과 통계적으로 유의한 차이를 보이지 않았다.

나이에 따른 한국인 정상 이하선의 전산화단층촬영값의 차이 (Age-dependent Difference in the Computed Tomography Numbers of the Normal Parotid Gland of Koreans)

  • 정호걸;이은숙;김기덕;박창서
    • 치과방사선
    • /
    • 제29권2호
    • /
    • pp.451-458
    • /
    • 1999
  • Purpose : To determine normal CT number range of parotid gland by analyzing the change by age increase and the difference among individuals and between both sexes in CT number of normal parotid gland. Materials & Methods : 134 subjects who took the CT scan between the period of Jan. 1996 and Dec. 1997 at Yonsei University, Dental Hospital were selected. Criteria for selection were that the patients must be within the normal range clinically and radiologically, and the entire parotid gland on the axial view must be shown. Among the axial views. the one showing the greatest parotid gland size was selected and its CT number was recorded. Also. CT numbers from both masseter muscle were recorded as its control. Results : There was statistically significant correlation between CT number of right and left of parotid glands and masseter muscles. With the increase of age. there is a significant decrease in the CT number of parotid gland(p<0.05). There was no statistically significant difference in CT number between sexes except the 7th decade and beyond age group of parotid gland(p>0.05). Conclusion : As age increases, CT number of parotid gland has a tendency to decrease, and there is no significant difference in the CT numbers between left and right parotid gland. Therefore in the CT scan of patients suspected of having a salivary gland disease of the parotid gland. to consider normal range of the age-dependent CT numbers of parotid gland and compare the CT numbers of the right and left parotid gland might be useful in diagnosing the disease.

  • PDF

Head & Neck 환자의 방사선 치료시 Metal Artifact의 감소를 위한 Gantry Tilt Scan의 유용성 평가 (Evaluation of using Gantry Tilt Scan to Head & Neck of Patients during Radiation Therapy for Reduction of Metal Artifact)

  • 이충환;윤인하;홍동기;백금문;권경태
    • 대한방사선치료학회지
    • /
    • 제22권2호
    • /
    • pp.85-95
    • /
    • 2010
  • 목 적: 두경부 환자의 CT simulation시 metal artifact가 발생하여 영상의 질 저하와 선량계산의 오차를 유발 할 수 있어 metal artifact를 줄이기 위한 gantry tilt scan의 유용성을 평가하고자 한다. 대상 및 방법: Metal artifact를 줄이기 위하여 $20^{\circ}$ gantry tilt scan하여 $0^{\circ}$로 재구성한 이미지를 획득하였다. AAPM CT performance Phantom을 이용하여 CT number를 비교 분석하고, 아크릴 팬텀을 이용하여 체적의 일치여부를 확인하였다. Metal artifact에 의한 영향을 평가하기 위해 Intensity volume Histogram (IVH)을 통한 CT number의 균질성 및 Dose Volume histogram (DVH)을 통한 선량평가를 시행하였다. 결 과: CT number와 체적의 비교에서는 차이가 0.5% 이하로 나타났다. IVH를 비교 분석결과 gantry tilt scan에서 artifact에 의한 영향이 감소되어 CT number의 균질도가 향상되고, DVH 비교결과는 양쪽 이하선의 0.2~6%의 평균선량 오차를 감소시켰다. 결 론: Head & Neck 방사선치료 시 metal artifact 때문에 체표윤곽의 구별이 어렵고 선량의 오차가 발생한다. Gantry tilt scan을 이용하면 정확한 조직의 묘사가 가능하고, CT number 균질도가 향상되어 선량의 오차를 줄일 수 있었다. Gantry tilt scan 은 Head & Neck 방사선치료 시 정확한 방사선치료에 매우 유용함을 확인하였다.

  • PDF

상층두께와 관심영역의 크기 변화가 CT 번호에 미치는 영향 (Effect of the slice thickness and the size of region of interest on CT number)

  • 이지연;김기덕;박창서
    • Imaging Science in Dentistry
    • /
    • 제31권2호
    • /
    • pp.85-91
    • /
    • 2001
  • Purpose: To evaluate the effect of the slice thickness and the size of region of interest (ROI) on CT number using quantitative CT phantom Materials and Methods: The phantom containing 150 mg/cc, 75 mg/cc and 0 mg/cc calcium hydroxyapatite was scanned with 1, 3, 5 and 10 mm slice thicknesses by single energy quantitative computed tomography (QCT). CT numbers were measured on center position of the phantom. Shape of ROI was circular and sizes were 1, 3, 5, 11, 16, 21, 26 and 33 mm². ANOVA and Tukey's multiple comparison method were performed for statistical comparison of CT numbers according to different slice thicknesses. Coefficient of variation of CT number measured in each size of ROI was evaluated in same slice thickness. Results : CT numbers had statistically significant difference according to slice thicknesses (p<0.05). As the slice thickness increased, CT number also increased. As the density of phantom became lower and the size of ROI became smaller, the coefficient of variation of CT number increased. When the size of ROI was more than 11 mm² in 1 mm slice thickness, 5 mm² in 3 mm slice thickness and 3 mm² in 5 mm slice thickness, the coefficient of variation became consistent. In 10 mm slice thickness, the size of ROI had little effect on the coefficient of variation. Conclusion: CT number had variation according to the slice thickness and the size of ROI although the object was homogeneous. The slice thickness and the size of ROI are critical factors in precision of the CT number measurements.

  • PDF

Iterative Metallic Artifact Reduction 알고리즘 적용 CT 재구성영상의 CT Number 변화율 분석 (The Analysis of CT Number Rate of Change of Applying The Iterative Metallic Artifact Reduction Algorithm for CT Reconstruction Image)

  • 김현주;윤준
    • 한국산학기술학회논문지
    • /
    • 제18권7호
    • /
    • pp.84-91
    • /
    • 2017
  • 본 연구는 컴퓨터 단층촬영 영상에서 제거할 수 없는 의료용 고밀도 물질을 Somatom Definition Flash(Siemens, Enlarge, Germany.)와 GE 64-MDCT (Discovery 750 HD, GE HEALTHCARE, Milwaukee, USA.)스캔 후 획득한 팬텀영상 데이터와 이미 촬영된 Raw 데이터영상을 이용하여 IMAR 알고리즘과 MAR 알고리즘 적용 및 재구성한 후 CT 재구성영상의 CT Number 변화율을 정량적으로 분석하였다. 그 결과 팬텀영상의 모든 의료용 고밀도 물질은 IMAR 알고리즘과 MAR 알고리즘 적용 시 CT Number의 변화와 영상의 차이가 있는 것으로 나타났지만(p<0.05). Stainless Steel 재질은 Black streak artifact에서 MAR 또는 IMAR 알고리즘 적용 시 재구성 영상의 변화와 CT Number의 변화차이가 없는 것으로 분석되었다(p>0.05). 또한 이미 촬영된 Raw 데이터영상 분석결과 IMAR 알고리즘 적용 시 적용 전에 비하여 영상 CT Number 변화가 있어, IMAR 알고리즘 적용은 Attenuation deviation에 영향을 미치는 것을 알 수 있었다. 이 결과를 바탕으로 향후 Implant시술 후 추적 CT검사 시 수술부위 및 주변조직의 상태를 관찰하는데 유용할 것으로 사료된다.

전산화 단층촬영의 의료보험 급여전후 촬영건수 비교 (The Comparison of Computerized Tomography Utilization between before and after Coverage of Medical Insurance)

  • 서신일;김한중;박은철;손명세;김동기
    • 한국병원경영학회지
    • /
    • 제3권1호
    • /
    • pp.121-133
    • /
    • 1998
  • We analyzed volume changes in the computerized tomography(CT) and the magnetic resonance imaging(MRI) utilizations. These two volumes are comparative because CT has been covered by the Medical Insurance from the beginning of 1996, however, MRI has not been covered up to now. We investigated 80 hospitals which afforded a facility of CT by the end of 1994. For the comparison of CT utilization, we selected two periods. The first period was from January to June of 1995, in which CT had not been covered by the Medical Insurance and the second period was from January to June of 1966, in which CT had been covered. The information we obtained were characteristics of hospitals, patients numbers per month, monthly uses of CT and MRI, and payments of CT claims, etc. After the Medical Insurance coverage, the number of CT uses per 1,000 patients were increased from January to March, however, was decreased from April to June in 1996 compared to the same periods of 1995. the number of CT uses in clinics were large than those in tertiary hospitals. The number of CT uses in small cities were larger than those in big cities. On the other hand, the number of MRI uses per 1,000 patients did not changed from January to May and was increased from June in 1996 compared to the same periods of 1995. These results showed the substitutional relationship of CT and MRI uses. After the insurance coverage for CT, the utilization of CT was increased because patients payed less than before. However, insurers restricted the payments to the CT claims. This impact might explain the substitutional relationship between CT and MRI.

  • PDF