• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.213-219
• /
• 2018

The degradation mechanism and physical properties of an FKM O-ring were observed with thermal aging in this experiment. From X-ray photoelectron spectroscopy (XPS) analysis, we could observe carbon (285 eV), fluoro (688 eV), and oxygen (531 eV) peaks. Before thermal aging, the concentration of fluoro atoms was 51.23%, which decreased to 8.29% after thermal aging. The concentration of oxygen atoms increased from 3.16% to 20.39%. Under thermal aging, the FKM O-ring exhibited debonding of the fluoro-bond by oxidation. Analysis of the C1s, O1s, and F1s peaks revealed that the degradation reaction usually occurred at the C-F, C-F2, and C-F3 bonds, and generated a carboxyl group (-COOH) by oxidation. Due to the debonding reaction and decreasing mobility, the glass transition temperature of the FKM O-ring increased from $-15.91^{\circ}C$ to $-13.79^{\circ}C$. From the intermittent CSR test, the initial sealing force was 2,149.6 N, which decreased to 1,156.2 N after thermal aging. Thus, under thermal aging, the sealing force decreased to 46.2%, compared with its initial state. This phenomenon was caused by the debonding reaction and decreasing mobility of the FKM O-ring. The S-S curve exhibited a 50% increase in modulus, with break at a low strain and stress state. This was also attributed to the decreasing mobility due to thermal aging degradation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.273-277
• /
• 2004

Variation in the size of the silk filament will determine the uniformity and quality of the silk reeled. In the present study, an attempt has been made to study the filament size variation in 6 multivoltine parental breeds and 9 multivoltine ${\times}$ bivoltine hybrids in all three seasons of a year. All multivoltine breeds and multivoltine ${\times}$ bivoltine hybrids showed variation in filament size throughout its length from the outer layer to inner layer. Results of the present study indicated that the size of the filament decreased from outer to inner layer. The decrease in filament size was sudden in some breeds/hybrids whereas it was gradual in other. Relationship between filament length to that of slope, average filament size to slope, and maximum filament size to slope was determined based on regression analysis. Regression analysis revealed significant positive correlation between slope vs average filament length (r=0.92$^{**}$) in multivoltine${\times}$bivoltine hybrids. Among parental breeds, 96C showed lowest slope of the curve (b-value: -0.00428) and 96A showed highest slope of the curve (b-value: -0.00269). Among 9 hybrids, PM${\times}$N $B_4$ $D_2$ recorded lowest slope value (b-value: -0.00328) and BL24${\times}$N $B_4$ $D_2$ showed highest value for slope of the curve (b-value: -0.00234). The breed 96C, which showed lowest slope value can be utilized for future breeding programmes to breed strains with less size deviation. Three multivoltine${\times}$bivoltine hybrids viz., PM${\times}$N $B_4$ $D_2$, 96E${\times}$CSR19 and BL67${\times}$CS $R_{101}$ , which showed less slope values (b-values: -0.00328, -0.00300 and -0.00297 respectively) can be utilized for commercial exploitation to produce uniform silk.k.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.95-107
• /
• 2012

Even though the importance of predicting build-up of pore pressure under cyclic loading is recognized, effective stress analysis is rarely performed due to difficulties in selecting the parameters for the pore pressure model. In this paper, a new stress based numerical model for predicting pore pressure under cyclic loading is developed. The main strength of the model is that it is easy-to-use, requiring only the CSR-N curve in selecting the parameters. Another advantage of the model is that it can be used for any loading pattern and therefore can be implemented in an effective stress time-domain dynamic analysis code. The accuracy of the model is validated through its comparisons with measurements in literature and laboratory test data collected in Korea. Further comparisons with another stress based pore pressure model highlighted the superiority of the proposed model.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.8
• /
• pp.37-49
• /
• 2018

Since the observation of ground motions in South Korea, liquefaction manifestation was the first to be observed in Pohang earthquake in 2017 with $M_L$ 5.4. Because liquefaction causes ground settlement and lateral spread damaging in-ground or super structures, various researchers have been analyzing the Pohang liquefaction case history to better understand and predict liquefaction consequence and to prevent future disasters. In prior research at the 2018 EESK conference, a map of Liquefaction Potential Index (LPI), indicating the severity of liquefaction, in Pohang was created and compared with damage observations. The LPI correlated well with the observations, but the severity categorized by LPI range was significantly higher than the actual observations in most regions. The prior LPI map was created evaluating ground motions using the simplified approach. In this research, we perform the effective site response analyses with porewater pressure generation model for the detailed evaluation of liquefaction on the liquefied sites in Pohang. We found that the simplified approach for LPI evaluation can overestimate the severity.