• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.1
• /
• pp.59-68
• /
• 2013

Nowadays, optimum structural design techniques based on CSR have been developed and applied to the preliminary design stage focused on minimum weight and minimum construction cost of ship structure. Optimum structural design algorithm developed before could minimize weight and cost on fixed compartment arrangement. However, to develop more efficient design technique, a designer needs to combine optimized compartment arrangement with optimized ship structural design because compartment arrangement has a large effect on structural design according to the change of still water bending moment as a consequence of compartment arrangement change. In this study, automated algorithm for compartment arrangement of an oil tanker is developed to apply preliminary structural design. The usefulness of developed algorithm is verified with Aframax oil tanker constructed by STX shipbuilding Co.Ltd..

• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.531-549
• /
• 2012

Numerous oil tanker losses have been reported and one of the possible causes of such casualties is caused by the structural failure of aging ship hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This research is about effect on hull girder ultimate strength behavior of double hull oil tanker according to corrosion after Part I: stiffened panel. Based on corrosion data of Part I (time-dependent corrosion wastage model and CSR corrosion model), when progressing corrosion of fourtypes of double hull oil tankers (VLCC, Suezmax, Aframax, and Panamax), the ultimate strength behavior of hull girder is compared and analyzed. In case of the ultimate strength behavior of hull girder, when occurring corrosion, the result under vertical and horizontal bending moment is analyzed. The effect of time-dependent corrosion wastage on the ultimate hull girder strength as well as the area, section modulus, and moment of inertia are also studied. The result of this research will be useful data to evaluate ultimate hull girder strength of corroded double hull oil tanker.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.467-474
• /
• 2018

To organize and document the contents of meetings and discussions is very important in various tasks. However, in the past, people had to manually organize the contents themselves. In this paper, we describe the development of a system that generates the meeting minutes automatically using the TextRank algorithm. The proposed system records all the utterances of the speaker in real time and calculates the similarity based on the appearance frequency of the sentences. Then, to create the meeting minutes, it extracts important words or phrases through a non-supervised learning algorithm for finding the relation between the sentences in the document data. Especially, we improved the performance by introducing the keyword weighting technique for the TextRank algorithm which reconfigured the PageRank algorithm to fit words and sentences.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.273-277
• /
• 2004

Variation in the size of the silk filament will determine the uniformity and quality of the silk reeled. In the present study, an attempt has been made to study the filament size variation in 6 multivoltine parental breeds and 9 multivoltine ${\times}$ bivoltine hybrids in all three seasons of a year. All multivoltine breeds and multivoltine ${\times}$ bivoltine hybrids showed variation in filament size throughout its length from the outer layer to inner layer. Results of the present study indicated that the size of the filament decreased from outer to inner layer. The decrease in filament size was sudden in some breeds/hybrids whereas it was gradual in other. Relationship between filament length to that of slope, average filament size to slope, and maximum filament size to slope was determined based on regression analysis. Regression analysis revealed significant positive correlation between slope vs average filament length (r=0.92$^{**}$) in multivoltine${\times}$bivoltine hybrids. Among parental breeds, 96C showed lowest slope of the curve (b-value: -0.00428) and 96A showed highest slope of the curve (b-value: -0.00269). Among 9 hybrids, PM${\times}$N $B_4$ $D_2$ recorded lowest slope value (b-value: -0.00328) and BL24${\times}$N $B_4$ $D_2$ showed highest value for slope of the curve (b-value: -0.00234). The breed 96C, which showed lowest slope value can be utilized for future breeding programmes to breed strains with less size deviation. Three multivoltine${\times}$bivoltine hybrids viz., PM${\times}$N $B_4$ $D_2$, 96E${\times}$CSR19 and BL67${\times}$CS $R_{101}$ , which showed less slope values (b-values: -0.00328, -0.00300 and -0.00297 respectively) can be utilized for commercial exploitation to produce uniform silk.k.

• Journal of Microbiology
• /
• v.43 no.spc1
• /
• pp.110-117
• /
• 2005

Salmonella enterica serovar Typhimurium causes human gastroenteritis and a systemic typhoid-like infection in mice. A critical virulence determinant of Salmonella is the ability to invade mammalian cells. The expression of genes required for invasion is tightly regulated by environmental conditions and a variety of regulatory genes. The hilA regulator encodes an OmpR/ToxR family transcriptional regulator that activates the expression of invasion genes in response to both environmental and genetic regulatory factors. Work from several laboratories has highlighted that regulation of hilA expression is a key point for controlling expression of the invasive phenotype. A number of positive regulators of hilA expression have been identified including csrAB, sirA/barA, pstS, hilC/sirC/sprA, fis, and hilD. HilD, an AraC/XylS type transcriptional regulator, is of particular importance as a mutation in hilD results in a 14-fold decrease in chromosomal hilA::Tn5lacZY-080 expression and a 53-fold decrease in invasion of HEp-2 cells. It is believed that HilD directly regulates hilA expression as it has been shown to bind to hilA promoter sequences. In addition, our research group, and others, have identified genes (hilE, hha, pag, and lon) that negatively affect hilA transcription. HilE appears to be an important Salmonella-specific regulator that plays a critical role in inactivating hilA expression. Recent work in our lab has been directed at understanding how environmental signals that affect hilA expression may be processed through a hilE pathway to modulate expression of hilA and the invasive phenotype. The current understanding of this complex regulatory system is reviewed.

• International Area Studies Review
• /
• v.20 no.3
• /
• pp.101-121
• /
• 2016

This research is purposed to analyze the effect of firms' current socially responsible management on the future corporate financial performance with specified areas of socially responsible management according to the beneficiaries. Tobin's Q statistic and return on assets are calculated and exploited as measures of corporate financial performance. as of empirical analysis results, we found that the social contributions in the consumer area and external social contribution at time t influence the Tobin's Q statistic at time (t+1) in the aggregate analysis. as it is revealed that there is no effect in the firms with the outstanding social performance to the future corporate financial performance, we understand that the capital market is very sensitive to the external social contribution including consumers of firms with the weak social performance rather than the social contribution of socially outstanding firms. This sensitivity of capital market can effectively enhance the social contribution of firms, in particular listed firms with the weak social performance.

• Journal of Climate Change Research
• /
• v.1 no.2
• /
• pp.97-107
• /
• 2010

A forest project for the sequestration of carbon dioxide helps to reduce the concerntration of greenhouse gas in atmosphere and provides various co-benefits. A lot of forestry-based carbon offset programs have been developing for the purpose of CSR(Corporate Social Responsibility), voluntary GHG emission reduction, and regulatory context etc. in worldwide. We studied major characteristics - project type and criteria, additionality, credits, permanence, carbon accounting and monitoring, co-benefit - of advanced forest carbon offset programs. Also, we tried to comprehend the direction and basic elements to design a domestic program.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.2
• /
• pp.25-42
• /
• 2019

The government announced that it would ask the contractors not only the supplier but also the contractors to take the same responsibilities if they did not observe industrial accident safety measures from 2019. The semiconductor manufacturing process belongs to the representative disaster industry group in which the facility is directly located inside a closed space called clean room. According to previous studies, the semiconductor industry group used checklists for safety management of their suppliers. This study has developed a model for assessing suppliers by constructing a quantitative checklist item through the risk assessment methodology, laws and regulations. The evaluation model of the supplier set up through this study becomes the safety management standard in the semiconductor industry. Furthermore, it is applied to the partner companies in the operation of ISO 14001, 45001, I would like to apply it as a measure of performance management for CSR (Corporate Social Responsibility).

• Architectural research
• /
• v.21 no.2
• /
• pp.41-48
• /
• 2019

The purpose of this study is to research and development of 'Korea B(Benefit)-impact Model' for Sustainable Development. A concept evaluation model is 'B(Benefit)-impact model' in U.S.A. We use the results of surveys that examined the importance of social value issues to stakeholders in Korea to implement the benefit-impact model in Korea. In particular, in this paper, we use the KSI(Korean Sustainability Index) survey data conducted by the Korea Standards Association to evaluate the social value of the construction industry for representative stakeholders in the construction industry. The social value pool and the activity indicator pool used for the survey are created based on relevant International Standards; ISO 26000, ISO 14001, ISO 37001. As a result, Korea B-impact model for construction industry included the following five core social value issues; Strengthen transparency of corporate management, Ensure fair employment and employment relations, Efforts to prevent corruption, Conduct fair competition, Efforts to prevent environmental pollution. In addition, the US B-impact model has three limitations. First, it is unclear whether the key indicators have been derived while considering all issues of social value. Second, US B-impact model indicators are developed by the social responsibility experts, so it is necessary to review by stakeholders in each industry. Finally, it would be more effective for companies to use the B-impact model index as a more detailed activity indicator. When developing a Korea B-impact model, the following methods are used to supplement it. First, we reviewed all social value issues using international standards. Secondly, we used the KSI(Korean Sustainability index) survey results to derive the importance of the social value issue of construction industry in Korea. Finally, we have clearly matched the activity indicators by social value core issues based on the GRI Standard so that companies can actually use the Korea B-impact model for the construction sector. The detailed development stages and results of this study are as follows;.

• Journal of Periodontal and Implant Science
• /
• v.51 no.3
• /
• pp.163-178
• /
• 2021

Purpose: The aim of this study was to evaluate clinical factors affecting the longevity of fixed retainers and the influence of fixed retainers on periodontal health in periodontitis patients. Methods: In total, 52 patients with at least 2 years of follow-up after periodontal and orthodontic treatment were included in this study. After scaling and root planing, orthodontic treatment with fixed appliances or clear aligners was performed. Fixed retainers with twist-flex stainless steel wires were bonded to the palatal or lingual sides of anterior teeth. Changes in clinical parameters, including the plaque index, gingival index, calculus index (CI), probing pocket depth, and radiographic bone levels, were evaluated before bonding of fixed retainers and at a 12-month follow-up. Cumulative survival rates (CSRs) for retainer failure were evaluated according to sex, site, CI, stage of periodontitis, and the severity of the irregularity with the log-rank test and hazard ratios (HRs). Results: Twelve months after bonding of fixed retainers, improvements were observed in all clinical parameters except CI and radiographic bone gain. The overall CSR of the retainers with a CI <1 at the 12-month follow-up after bonding of fixed retainers was significantly higher than that of the retainers with a CI ≥1 at the 12-month follow-up (log-rank test; P<0.001). Patients with stage III (grade B or C) periodontitis had a higher multivariate HR for retainer failure (5.4; 95% confidence interval, 1.22-23.91; P=0.026) than patients with stage I (grade A or B) periodontitis. Conclusions: Although fixed retainers were bonded in periodontitis patients, periodontal health was well maintained if supportive periodontal treatment with repeated oral hygiene education was provided. Nonetheless, fixed retainer failure occurred more frequently in patients who had stage III (grade B or C) periodontitis or a CI ≥1 at 12-month follow-up after bonding of fixed retainers.