• CDE review
• /
• v.21 no.2
• /
• pp.50-60
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.210-215
• /
• 2018

Coal seam gas (CSG) water, to be discharged, has been usually treated in reverse osmosis (RO) plants which require extensive and expensive pre-treatment. However, current low gas prices have been a great driver for relevant industries to seek for alternative cost-effective technologies in the aspect of its beneficial use and fit-for-purpose usable water production. In this paper, a combined system with a two-stage pore control fiber (PCF) filtration and a RO system was designed and tested for CSG water treatment. Also, a coagulation reactor was placed in front of the PCF to further enhance suspended solid removal. More than 99% of SS were removed through the PCF filtration while organic, total nitrogen and total phosphorous were mostly removed by the RO system. Especially along with a decrease in conductivity, the total dissolved solid derived from salts was mainly removed in the RO system. Having $OH^-$ undetected, $HCO_3{^-}$ was found to be a dominant compound and its removal efficiency was 97-98% after the RO treatment. And a Fe(III) type of Polytetsu, which was the first to be tested in this paper, was found to be a better option than a Al(III) type of Poly Aluminium Chloride due to its greater coagulation efficiency and applicability at a broader range of pH than the Al(III) type. In addition, there was no noticeable change in oxidation reduction potential, suggesting that an additional process is required to oxidize non-ionic organic carbons (detected as total organic carbon).

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.37-42
• /
• 2017

We are designed to control the lipoid variation of the structure system with the stratum corneum on the skin. The skin structure is consisted of a morphology how to use the lipoid component, and the given skin structure is consisted of the mechanical shapes of the intercellular route and transcellular route, and is confirmed to control the variation state of the structure capacity. The skin impedance is appeared to result the value of measurement such as shapes of ${\lambda}-Lip-RSC$, ${\lambda}-Lip-RSL$, ${\lambda}-Lip-CSG$, ${\lambda}-Lip-CSS$ and ${\lambda}-Lip-RSB$. The condition is showed to the alteration difference value of the intercellular route and transcellular route. And, composition condition is established to separate the division parts for conversion system that is constructed with the alteration modeling. We will be possible to progress the improvement effectiveness of the continuous skin control system on the skin.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.25-29
• /
• 2009

Ceramide is important not only for the maintenance of the barrier function of the skin but also for the water-binding capacity of the stratum corneum. Though the effectiveness of ceramide is not understood fully, ceramide has become a widely used ingredient in cosmetic and pharmaceutical industries. However, ceramide production from Saccharomyces cerevisiae has not been widely studied and the quantity are very low. Gene deletion in the cell is used frequently to investigate the function of gene and verification research of drug target. Specially, deletion mutant library is useful for a large amount functional analysis of gene. In this study, deletion mutants of genes on the metabolic pathway of ceramide synthesis in S. cerevisiae were grown in a batch culture and the cellular content of ceramide was measured. The ceramide content was highest in ${\triangle}$ydc1 mutant and 6 mg ceramide/g cell was obtained.

• Computers and Concrete
• /
• v.26 no.6
• /
• pp.483-495
• /
• 2020

Dams are vital infrastructures that are expected to maintain their stability during seismic excitations. Accordingly, cemented material dams are an emerging type, which are being increasingly used around the world owing to benefiting from advantages of both earth-fill and concrete gravity dams, which should be designed safely when subjected to strong ground motion. In the present paper, the seismic performance of a cemented sand and gravel (CSG) dam is assessed using incremental dynamic analysis (IDA) method by accounting for two failure modes of tension cracking and base joint sliding considering the dam-reservoir-foundation interactions. To take the seismic uncertainties into account, the dam is analyzed under a suite of ground motion records and then, the effect of friction angle for base sliding as well as deformability of the foundation are investigated on the response of dam. To carry out the analyses, the Cindere dam in Turkey is selected as a case study, and various limit states corresponding to seismic performance levels of the dam are determined aiming to estimate the seismic fragilities. Based on the results, sliding of the Cindere dam could be serious under the maximum credible earthquake (MCE). Besides, dam faces are mostly to be cracked under such level of intensity. Moreover, the results indicate that as friction angle increases, probability of sliding between dam and foundation is reduced whereas, increases tensile cracking. Lastly, it is observed that foundation stiffening increases the probability of dam sliding but, reduces the tensile damage in the dam body.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1093-1097
• /
• 2004

We propose 'the haptic primitive' for haptic rendering without the need to solve complicated parametric equations. To develop 'the haptic primitive', we adopted "the God-Object Method" as a haptic rendering algorithm and applied 'Constructive Solid Geometry' to manage haptic objects. Besides being used in the 'ghost library' of $PHANToMTM^{TM}$ our method can be used as a basic component for developing tools and libraries that aim to simplify haptic modeling. It can also be applied to tactile display modules and temporal display modules. Ultimately it can be developed into a one-stop haptic modeling tool that enables the user to more conveniently create a tangible CAD systems or a tangible e-ommerce system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1626-1629
• /
• 2003

The study is expressed on the web browser using virtual reality of developer manufacturing process and method or manufactured goods conviction for designer and developer with visualized model. This study purpose of basic feature with VRML file and Java and VRML with AWT to get WC code was presented. The study process is equal to the real thing modeling on using Pro/Engineer and exports on the VRML1.0. The condition converts VRML1.0 to VRML2.0 on the CROSS ROADS. And then Cosmo World is coding and manufacturing simulation is expressed on the Cosmo Player.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.847-854
• /
• 1991

This paper presents a new output phase assignment algorithm which determines the phases of all the nodes in a given boolean network. An estimation function is defined, which is represented by the relation between the literals in the given function expression. A weight function, WT (fi, fj) is defined, which is represented by approximate amount of common subexpression between function fi and fj. Common Subexpression Graph(CSG) is generated for phase selection by the weight function between all given functions. We propose a heuristic algorithm finding subgraph of which sum of weights has maximum by assigning phases into the given functions. The experiments with MCNC benchmarks show the efficiency of the proposed method.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.37-42
• /
• 2009

The performance of an OLED(organic luminescent emitting device) fabrication system strongly depends on the design of the evaporation cell-source. Trends in display sizes have hauled the enlargement of mother glass substrates. The enlargement of substrates requires the improvement and the enlargement of the effusion cell-source for OLED evaporation process. The deposited layers should be as uniform as possible, and therefore it is important to know the effusion profile of the molecules emitted from the cell-source. Conventional 2D DSMC algorithm cannot be used for simulating the new concept cell-source design, such as a linear source. This work concerns the development of 3D DSMC (direct simulation Monte Carlo) analysis for simulating the behavior of the evaporation cell-sources. In this paper, the 3D DSMC algorithm was developed and the film thickness profiles were obtained by the numerical analysis.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.428-441
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.