• 자동차안전학회지
• /
• 제8권1호
• /
• pp.31-37
• /
• 2016

The Child Occupant Safety Assessment was first introduced and carried out by Euro NCAP in 2003, with the goal of ensuring manufacturers to develop safe vehicles for passengers of all ages; the objective was to evaluate the safety and protection offered by different Child Restraint Systems (CRS) in the event of a crash. In 2013, the formerly used P child dummy series was replaced by newer and more biofidelic Q1.5 and Q3 child dummies, representing 1.5 and 3 year old children respectively. The frontal and side impact dynamic performances of the Q1.5 and Q3 were tested within all classes of vehicles assessed by Euro NCAP at the time. As an extension to that initiative, Q6 and Q10 child dummies were later developed representing children of 6 and 10 years old. Since the protection of larger children during vehicle crashes relies greatly on the interaction of vehicle restraint systems such as seat belt and the CRS, instrumented Q6 and Q10 dummies will be used to assess the protection offered in the event of front and side impact crashes. In this paper, we focused on injury criteria of Q6 and Q10 child dummies at 64 kph 40% offset frontal crash test. The whole procedure was designed with DFSS analysis. The full vehicle sled test results of both dummies were conducted with different restraint systems settled through previous sled test. It showed that several injury criteria and image data were collected as the result of the full vehicle sled test. Based on the results of these investigations, this paper describes which factor is most important and combination shows the best performance when evaluating rear seat occupant protection for Q6 and Q10 child dummies.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.65-71
• /
• 2013

PURPOSES : The objective of this study is to evaluate the effect of physical characteristics of emulsion asphalt and aggregate on performance of chip seal pavements. METHODS : In order to evaluate the performance of chip seal materials, the sweep tests and Vialit Plate Shock tests were conducted on the mixtures with five emulsion asphalt binders and three aggregate types. The sweep tests was intended to investigate the change of bonding properties between emulsion asphalt and aggregate with curing time. The Vialit Plate Shock test was used to evaluate the bonding properties of chip seal materials at low temperatures. RESULTS : Results from sweep tests showed that polymer modified emulsion asphalt can reduce the curing time by 1.5 hour comparing with typical emulsion asphalt. It is also found that the Flakiness Index of aggregates and absorption rate of binder are the major factors affecting the bonding properties of chip seal materials. The Vialit Plate Shock test results showed that the average aggregate loss of CRS-2 is ten times higher than CRS-2P No.2 indicating that the use of polymer additives in emulsion asphalt can improve the performance of chip seal materials in low temperature region. CONCLUSIONS : The use of polymer in emulsion asphalt can decrease the curing time of chip seal materials and increase the bonding properties between aggregates and asphalt binder. It is also concluded that the lower Flakiness Index and absorption rate of aggregates can improve the performance of chip seal pavement.

• 한국지반환경공학회 논문집
• /
• 제17권2호
• /
• pp.13-22
• /
• 2016

연약지반의 특성에 부합하는 이론을 이용하여 침하량을 합리적으로 예측하는 것은 건설방재적 관점에서도 대단히 중요하다. 특히, 준설매립지반과 같은 초연약지반의 압밀거동 모사를 위해서는 비선형 유한변형 압밀이론을 적용할 필요성이 있다. 본 연구에서는 인천 송도지역 준설토의 침강 및 압밀특성을 파악하기 위하여 침강압밀시험, 자중압밀시험 및 CRS 압밀시험을 수행하였으며, 그 결과를 PSDDF를 이용한 수치해석의 입력치로 사용하여 준설매립지반의 거동을 해석하였다. 본 지역의 준설토는 통일 분류법에 의해 저압축성 실트(ML)로 분류되었으며, Yano법 및 수치해석을 통하여 얻어진 최종 체적변화비는 각각 1.56, 1.17로 나타났다. 이러한 결과의 차이는 계면고가 상대적으로 높고 투수성이 큰 해당 구간 준설매립토의 토질 특성에 기인한 것으로 사료된다.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.43-53
• /
• 2003

연약점토에 대한 실내시험으로부터 양호한 토질정수를 구하기 위해서는 시료교란의 영향을 최소화하여야만 한다. 본 연구에서는 시료채취기술 및 시료채취관에 따른 시료교란의 영향을 조사하기 위한 목적으로 낙동강 하구유역에 분포하고 있는 연약점성토를 대상으로 한ㆍ일 공동연구를 실시하였다. 양국의 시료채취기술에 의하여 채취된 시료에 대하여 일축압축시험과 압밀시험을 실시하여 토질정수 및 시료교란도를 비교하였다. 결과적으로, 한국에서 사용되고 있는 수압식 피스톤 샘플러를 사용하더라도 시료채취 전에 일본에서 실시하고 있는 방법대로 슬라임의 제거작업을 면밀히 수행할 경우에 시료의 품질이 명백하게 개선됨을 알 수 있었다. 그리고 0.02%/min의 속도로 수행된 일정변형률(CRS) 압밀시험은 표준압밀시험에 비하여 시험방법의 차이 때문에 압밀정수의 증대 및 낮은 교란도를 나타내었다.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.1-9
• /
• 2010

This study was carried out to comparison of coefficient of consolidation and the prediction of excess pore water pressure in agricultural reservoir on soft clay ground. For the purpose of verification of the proposed equation, laboratory model tests and field tests were performed and excess pore water pressure was compared to those predicted with the Terzaghi's method. The predicted excess pore water pressure according to ponding was very applicable to practice because it was close to the observed data. Also, for the comparison of coefficient of consolidation, the oedometer, constant rate of strain (CRS), and Rowe cell tests were performed. The coefficient of consolidation at the Rowe cell and CRS tests showed a greate increase than in the oedometer test. The ratio of the vertical and horizontal coefficient of consolidation showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to predicting the required consolidation period in agricultural reservoir.

• 천문학회지
• /
• 제54권3호
• /
• pp.103-112
• /
• 2021

The intracluster medium (ICM) is expected to experience on average about three passages of weak shocks with low sonic Mach numbers, M ≲ 3, during the formation of galaxy clusters. Both protons and electrons could be accelerated to become high energy cosmic rays (CRs) at such ICM shocks via diffusive shock acceleration (DSA). We examine the effects of DSA by multiple shocks on the spectrum of accelerated CRs by including in situ injection/acceleration at each shock, followed by repeated re-acceleration at successive shocks in the test-particle regime. For simplicity, the accelerated particles are assumed to undergo adiabatic decompression without energy loss and escape from the system, before they encounter subsequent shocks. We show that in general the CR spectrum is flattened by multiple shock passages, compared to a single episode of DSA, and that the acceleration efficiency increases with successive shock passages. However, the decompression due to the expansion of shocks into the cluster outskirts may reduce the amplification and flattening of the CR spectrum by multiple shock passages. The final CR spectrum behind the last shock is determined by the accumulated effects of repeated re-acceleration by all previous shocks, but it is relatively insensitive to the ordering of the shock Mach numbers. Thus multiple passages of shocks may cause the slope of the CR spectrum to deviate from the canonical DSA power-law slope of the current shock.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.59-66
• /
• 1999

ILT proposed by Tezaghi was frequently used which is based on one dimensional consolidation theory. But this test require time longer than a week and has problems for extra soft clay such as the squeezing around the consolidation ring. Also consolidation curve is not clearly defined since only a few data is obtained in a test. Therefore it is difficult to determine Pc and the interpretation to determine the consolidation constants are rather complicated. In this paper, the stress-strain relationship and consolidation constant obtained by CRS and CG-test were analyzed and compared with the results by ILT.

• 산업기술연구
• /
• 제32권A호
• /
• pp.87-94
• /
• 2012

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation(CRS) test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. As results of numerical method, the volumetric ratio and reclamation velocity were obtained for the reclamation condition.

• Korean Journal of Radiology
• /
• 제22권11호
• /
• pp.1918-1928
• /
• 2021

Objective: With the recent development of various MRI-conditional cardiac implantable electronic devices (CIEDs), the accurate identification and characterization of CIEDs have become critical when performing MRI in patients with CIEDs. We aimed to develop and evaluate a deep learning-based algorithm (DLA) that performs the detection and characterization of parameters, including MRI safety, of CIEDs on chest radiograph (CR) in a single step and compare its performance with other related algorithms that were recently developed. Materials and Methods: We developed a DLA (X-ray CIED identification [XCID]) using 9912 CRs of 958 patients with 968 CIEDs comprising 26 model groups from 4 manufacturers obtained between 2014 and 2019 from one hospital. The performance of XCID was tested with an external dataset consisting of 2122 CRs obtained from a different hospital and compared with the performance of two other related algorithms recently reported, including PacemakerID (PID) and Pacemaker identification with neural networks (PPMnn). Results: The overall accuracies of XCID for the manufacturer classification, model group identification, and MRI safety characterization using the internal test dataset were 99.7% (992/995), 97.2% (967/995), and 98.9% (984/995), respectively. These were 95.8% (2033/2122), 85.4% (1813/2122), and 92.2% (1956/2122), respectively, with the external test dataset. In the comparative study, the accuracy for the manufacturer classification was 95.0% (152/160) for XCID and 91.3% for PPMnn (146/160), which was significantly higher than that for PID (80.0%,128/160; p < 0.001 for both). XCID demonstrated a higher accuracy (88.1%; 141/160) than PPMnn (80.0%; 128/160) in identifying model groups (p < 0.001). Conclusion: The remarkable and consistent performance of XCID suggests its applicability for detection, manufacturer and model identification, as well as MRI safety characterization of CIED on CRs. Further studies are warranted to guarantee the safe use of XCID in clinical practice.

• 농약과학회지
• /
• 제7권4호
• /
• pp.288-295
• /
• 2003

유기인계 살충제인 chlorpyrifos에 대한 배추좀나방의 저항성 원인을 구명하기 위하여 저항성 인자로 알려진 두 가지 무독화 효소, esterases와 glutathione- S-trasferase(GST)의 활성과 작용점 효소인 acetylcholinesterase(AChE)의 insensitivity 정도를 측정하였다. 또한 chlorpyrifos와 작용점이 동일한 계통의 살충제에 대한 저항성 발달과의 상관관계를 조사하여 교차저항성 발달 특성을 검정하였다. 감수성 배추좀나방에 chlorpyrifos의 아치사량을 처리하여 160배의 저항성을 나타내도록 선발하여 실험에 사용하였다. 저항성 계통의 GST 활성은 감수성 계통의 GST 활성에 비하여 1.7배 높았으나, 감수성 계통과 저항성 계통간에 esterases 활성 차이는 없었다. 또한 chlorpyrifos의 작용점인 AChE insensitivity 측정결과 저항성 계통이 감수 성계통보다 11.6배 높았다. Chlorpyrifos 저항성 계통은 AChE을 저해하는 것으로 알려진 유기인계 및 카바 메이트계 살충제인 dichlorvos, dimethylvinphos, carbofuran에 대해서도 각각 33.6배, 17.6배, 18.7배의 insensitivity를 나타내었다. 그러나 동일한 작용점을 저해하는 phenthoate-oxon에 대해서는 1.7배의 낮은 insensitivity를 보였다. 또한 이들 약제들에 대한 교차저항성 발달정도를 측정한 결과, chlorpyrifos 저항성 계통은 dichlorvos, dimethylvinphos, carbofuran에 대하여도 각각 82배, 47배, 42배의 높은 교차저항성 발달을 나타내었으나, phenthoate에 대해서는 2.3배로 낮은 교차저항성 발달을 보여 작용점이 동일한 유사계열 약제들이라도 저항성을 유발하는 기작에는 서로 큰 차이가 있을 수 있음을 확인할 수 있었다. 본 실험 결과 AChE insensitivity 와 저항성 발달비 간에는 정의상관관계$(r=0.9951^{**},\;p^{(0.01)}$를 보이는 것으로 나타났는데, 이는 유기인계 및 카바메이트계 살충제의 저항성 발달이 AChE에 대한 insensitivity 정도와 관련 있음을 시사하는 것이다. 본 연구의 결과를 통하여 chlorpyrifos에 대한 배추좀나방의 저항성 발달은 작용점인 AChE에 대한 약제의 insensitivity가 주 요인 중 하나이며, 무독화 효소 중 GST 활성증가가 부가적인 요인이 될 수 있음을 확인할 수 있었다.