• Proceedings of the KSEEG Conference
• /
• 1999.04a
• /
• pp.39-42
• /
• 1999

1) 서울 지역 도로가 퇴적물에서는 특히 Cu와 Zn의 오염이 도심 지역을 중심으로 심각하게 진행되고 있으며. Pb는 무연 휘발유의 사용량 증가와 더불어 감소 추세이나 여전히 높은 함량을 나타내고 있다. 2) Pb와 Cr의 함량은 공간적 지배가 강하여 Pb는 주로 교통 혼잡 지역, Cr은 공구상 밀집 지역에서 높게 나타난다. 반면, Cu, Cd, Zn 함량은 시간적 및 공간적 변화를 모두 보여주어 금속 산업 밀집도 및 강우량 변화에 따라 변화된다. 3) 특히 오염이 심화되고 있는 지역의 도로가 퇴적물이 하수계로 직접 유입되지 못하도록 차단하는 적절한 시설이 필요하며, 아울러 오염된 퇴적물을 집적하여 처분할 때는 주변 토양의 오염에 유의해야 할 것이다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1670-1672
• /
• 2000

The stability of ZnO-$Pr_{6}O_{11}$-CoO-$Cr_{2}O_{3}-Dy_{2}O_3$ based varistors with d.c. stress were investigated. ZnO varistor doped with 4.0 mol% $Dy_{2}O_3$ exhibited the highest nonlinear exponet, but stability was very poor because of low density. In particular, the varistor containing 0.5 mol% $Dy_{2}O_3$ showed very excellent V-I characteristic, which the nonlinear exponent was 67.39 and leakage current was 1.18 ${\mu}A$, and high stability.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.2
• /
• pp.169-176
• /
• 1999

The purpose of this study was to investigate the relationships of dietary nutrients and serum heavy metals in college women living Choong-Nam area of Korea. The mean age, height, weight, and BMI were 22.9years, 158.74cm, 53.39kg, and 21.71kg/$m^2$ respectively. The mean daily energy intake was 85.9% of RDA for Koreans. The ratio of energy from carbohydrate, fat, and protein was 61:23:16. And the daily vitamin A, B$_2$, Ca were 90%, 78%, 60% of RDA for Korea, respectively. The mean serum levels of Pb, Cd, Cr were 0.190, 0.005, 0.025$\mu\textrm{g}$/$m\ell$, respectively. The serum Cd was significantly different with dietary carbohydrate(p＜0.05). And the serum Cr was significantly different with dietary protein intake(p＜0.05), phosphorus(p＜0.01), potassium(p＜0.05). respectively.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.28-39
• /
• 2004

The effect of trace metallic additives on microstructure, surface appearance and hardness of zinc electrodeposits was investigated by using sulfate bath and flow cell system. The preferred orientation of Zn deposit with Fe additive was (103)(104)+(002) mixed texture and that of Zn deposits with both Fe-Ni and Fe-Co additives was (10 1), while Zn deposits with Fe-Cr additives had (002) preferred orientation. The surface morphology of the zinc deposits was closely related to the preferred orientation of the deposits. The glossiness of Zn deposit with Fe-Ni additives was higher than that of pure Zn deposit, while the glossiness of Zn deposits with both Fe-Co and Fe-Cr additives was lower than that of pure Zn deposit. The hardness of Zn deposits with both Fe-Ni and Fe-Co additives was noticeably higher than that of Zn-Fe deposit, while that of Zn deposit with Fe-Cr additives was similar to that of Zn-Fe deposit.

• Journal of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.25-39
• /
• 2010

We perform kinetic simulations of diffusive shock acceleration (DSA) in Type Ia supernova remnants (SNRs) expanding into a uniform interstellar medium (ISM). Bohm-like diffusion due to self-excited $Alfv\acute{e}n$ waves is assumed, and simple models for $Alfv\acute{e}nic$ drift and dissipation are adopted. Phenomenological models for thermal leakage injection are considered as well. We find that the preshock gas temperature is the primary parameter that governs the cosmic ray (CR) acceleration efficiency and energy spectrum, while the CR injection rate is a secondary parameter. For SNRs in the warm ISM of $T_0\lesssim10^5K$, if the injection fraction is $\xi\gtrsim10^{-4}K$, the DSA is efficient enough to convert more than 20% of the SN explosion energy into CRs and the accelerated CR spectrum exhibits a concave curvature flattening to $E^{-1.6}$, which is characteristic of CR modified shocks. Such a flat source spectrum near the knee energy, however, may not be reconciled with the CR spectrum observed at Earth. On the other hand, SNRs in the hot ISM of$T_{0}\approx10^{6}K$ with a small injection fraction, $\xi$<$10^{-4}$, are inefficient accelerators with less than 10% of the explosion energy getting converted to CRs. Also the shock structure is almost test-particle like and the ensuing CR spectrum can be steeper than $E^{-2}$. With amplified magnetic field strength of order of $30{\mu}G$ $Alfv\acute{e}n$ waves generated by the streaming instability may drift upstream fast enough to make the modified test-particle power-law as steep as $E^{-2.3}$, which is more consistent with the observed CR spectrum.

• Journal of Technologic Dentistry
• /
• v.37 no.1
• /
• pp.23-29
• /
• 2015

Purpose: The selective laser melting (SLM) process for dentistry, which is one of the additive manufacturing technologies (AM) allows for rapid production of a three-dimensional model with complex shape by directly melting metal powder. This process generates detailed items of a three-dimensional model shape through consolidation of a thin powder layer by utilizing both selective melting and laser beam simultaneously. In regard to SLM process, Fe-base powder, Ti-6AI-4V powder, AI-base powder, etc. have been researched. It is believed that the aforementioned technologies will be widely utilized in manufacturing metal parts using metal powder of raw material. This study chose Ni-Cr-Mo metal powder in order to manufacture metal powder materials that would be used in the selective laser melting for dentistry. Methods: This study manufactured metal powder using mechanical alloying technique (MA) among those metal powder manufacturing techniques. Moreover, this study aimed to utilize the metal powder manufactured after observing the characteristics of powder as preliminary data of Ni-Cr-Mo metal powder. This study could obtain the following conclusions within the experimental limitations. Results: As a result of mechanically alloying Ni-Cr-Mo powder over time, its mean particle size was $66.93{\mu}m$ $54.4{\mu}m$ and $45.39{\mu}m$ at 10h, 20h and 30h, respectively. The gtain form of metal powder by mechanical alloying technique was a sponge-like shape of irregular plate; however, the gtain form manufactured by high-pressure water aromization process had the following three types: globular type, chain type and oval type. Conclusion: This study found $37.65{\mu}m$ as the mean particle size of Ni-Cr-Mo metal powder, which was manufactured using water atomization technique under the following conditions: water atomization flux of 300 liter/min, hydraulic pressure of $400kgf/cm^2$ and injection angle of $45^{\circ}$. This study confirmed that the grain form of powder (solid particle form) would vary depending on the manufacturing process.

• Korean Journal of Animal Reproduction
• /
• v.17 no.4
• /
• pp.271-278
• /
• 1994

The aim of this study was to compare the two culture systems 1) co-culture with cumulus cells and 2) chemically defined medium supplemented with amino acids (CR1aa) and fetal calf serum (FCS) of in vitro produced bovine embryos from follicular oocytes in vitro. Bovine follicular oocytes were collected from ovaries of slaughtered cows and matured in TCM199 supplemented with 10% FCS and hormones (1$\mu\textrm{g}$/ml FSH-P and 1$\mu\textrm{g}$/ml oestradiol-17$\beta$)24 hours at 39$^{\circ}C$ under 5% CO2 in air. The capacitation of spermatozoa from ejaculated or frozen bull semen was induced by centrifugation through Percoll density gradient (45%, 90%). Then capacitated spermatozoa (1$\times$106/ml) were inseminated into 50${mu}ell$ droplet containing matured follicular oocytes and incubated for 40~42 hours. Cleaved embryos of 2~4cell stage were transferred to the co-culture with cumulus cells and/or CR1aa medium supplemented with FCS. In semen source, the developmental rates to the blastocyst and the hatched blastocyst stages were higher in ejaculated semen(27.6% and 14.9%) than those of frozen-thawed semen(18.3% and 11.8%), respectively. In two culture systems, the proportions of embryonic development upto the blastocysts and the hatched blastocysts were higher of CR1aa medium (22.1% and 12.1%) than those of cumulus cell co-culture (16.8% and 5.1%), respectively. The number of cells in exapnded blastocysts was slightly higher in cumulus cells co-culture (122.6$\pm$8.5) than that in CR1aa medium (117.9$\pm$5.9). The present results indicated that the early development of in vitro produced bovine embryos can be maintained efficiently in CR1aa medium as well as in co-culture with cumulus cells.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.1
• /
• pp.39-50
• /
• 2001

Vanadium based solid solution alloys have been studied as a potential negative electrode of Ni/MH battery due to their high hydrogen storage capacity. In order to improve the kinetic property of V-Ti alloy in KOH electrolyte, the ball-milling process with Ni, which has a catalytic effect of hydrogen absorption/desorption, was carried out to modify the surface properties of V-Ti-Cr alloys with high hydrogen storage capacity. Moreover, to overcome the problem of poor cycle life, V-Ti alloy substituted by Cr, V0.68 Ti0.20 Cr0.12, has been developed showing a good cycle performance (keeping about 80 % of initial discharge capacity after 200 cycles). The cycle life of surface-modified V0.68 Ti0.20 Cr0.12 alloy was improved by suppressing the formation of TiO2 layer on the alloy surface while decreasing the amount of dissolved vanadium in the KOH electrolyte. In order to promote the effect of Ni coating on the surface property of V0.68 Ti 0.20 Cr 0.12 alloy by ball-milling, filamentary-typed Ni, which has higher surface coverage area than sphere-typed Ni was used as a surface modifier. Consequently, the surface-modified V0.68 Ti0.20 Cr0.12 alloy electrode showed a improved discharge capacity of 460 mAh/g.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.39.1-39.1
• /
• 2007

• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.263-267
• /
• 2006

As technology advances, there is a demand for development of hard solid lubricant coating. (Ti, Cr, Zr)N-$MoS_2$ films were deposited on AISI H13 tool steel substrate by co-deposition of $MoS_2$ with (Ti, Cr, Zr)N using a D.C. magnetron sputtering process. The influence of the $N_2Ar$ gas ratio, the amount of $MoS_2$ in the films and the bias voltage on the mechanical and structural properties of the films were investigated. The highest hardness level was observed at the $N_2/Ar$ gas ratio of 0.3. Hardness of the films did not change much with the increase of the $MoS_2$ content in the films. As the substrate bias potential was increased, hardness level of the film reached maximum at -150 V. Surface morphology of these films indicated that high hardness was attributed to the fine dome structure.