• Journal of Soil and Groundwater Environment
• /
• v.7 no.3
• /
• pp.71-77
• /
• 2002

This research was carried out from 2001. 4 until 2001. 5 in order to examine the level of soil contamination in the vicinity of Nanjido. The sampling was done at near the Nanjido soil. At the each sampling site we did the sampling at different depth- surface(0~15cm deep), 1m deep, 2m deep, 3m deep. The contamination of Cd, Cu, Pb, As, $Cr^{+6}$, and Hg were tasted and analysed by spectra AA. The examination showed that the average concentration level of the entire sampled soil was Cd, 0.229mg/kg, Cu 8.349mg/kg, Pb : 11.083mg/kg, As : 0.298mg/kg, $Cr^{+6}$ : 0.124mg/kg, and Hg : 0.134mg/kg. The concentration level of at the depth of 0-l5cm, came out to be Cd : 0.305mg/kg, Cu : 8.464mg/kg, Pb : 11 383mg/kg, As : 0.128mg/kg, $Cr^{+6}$ : 0.153mg/kg, and Hg : 0.092mg/kg. It shows that in the cases of Cd and C $r^{+6}$ the average concentration level of the whole sampled soil was about 80% of that of 0-l5cm depth. And as for Hg and As. the average concentration level of the entire sampled soil came out to be approximately twice as high as the sample soil from the depth surface, As for Cu and Pb, there was not much difference between the entire samples average concentration level and the concentration level of surface. It was hard to find much relationship between the depth of each site where sampling was done and the level of concentration, the concentration level of Pb and Cu at the sampling site C and E was quite high, which suggests that it has been affected by the polluted the hyang-dong stream and fill random up waste.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.227-229
• /
• 2012

한국해양연구원에서 개발하고 있는 해저보행로봇 CR200은 6개의 다리를 이용하여 해저면에서 보행으로 이동하며 정밀 해저탐사 및 작업을 수행할 수 있는 로봇이다. 운용자는 선상제어실에서 유선으로 연결된 CR200을 원격으로 모니터링하거나 제어한다. 특히 안정적인 보행을 위해서는 100Hz의 주기로 CR200의 상태 정보가 선상제어실로 전송되고, 선상제어실에서는 전송된 정보를 기반으로 제어 명령을 산출하여 CR200으로 전송해야 한다. 이러한 주기적인 실시간 제어를 위해서는 일반적으로 실시간 운영체제를 사용하지만, 본 논문에서는 실시간 운영체제를 사용하지 않고 시스템 시간 기반의 백그라운드 프로세스로 동작하는 소프트웨어 타이머를 사용하여 실시간 제어를 하는 방법을 제안하고, 성능 평가 결과를 제시한다. 제안한 방법의 실시간 속성을 검증하기 위하여, 현재 설계에서 운영체제로 고려하고 있는 우분투 10.04와 윈도우즈 7을 CR200에 탑재되는 Advantech 사의 PCM-3362 보드에 설치하여 소프트웨어 타이머의 성능을 10ms부터 100ms까지 각각 실험하였다. 실험결과에 따르면, 두 운영체제에서 모두 누락이 없이 타이머 동작이 수행되었으며, 10ms 간격으로 타이머를 동작하였을 때에 우분투에서는 평균 오차가 $41{\mu}s$이었고 윈도우즈 7에서는 7.7ms였다. 윈도우즈 7에서의 오차는 100Hz 제어 주기에 사용하기에 적합하지 않지만, 우분투에서의 오차는 제어 주기 간격의 0.41%에 불과하기 때문에 해저보행로봇의 실시간 제어에 영향을 주지 않는 오차이다. 따라서 CR200의 임베디드 컴퓨터와 선상제어실의 원격제어 컴퓨터는 우분투 운영체제 상에서 소프트웨어 타이머를 이용하여 상호 연동되도록 구현할 예정이다.

• Elastomers and Composites
• /
• v.23 no.3
• /
• pp.223-229
• /
• 1988

The effect of triazine thiol derivative on the physical properties of silica-polychloroprene(CR) composites and glass fiber(MGF)-CR composites was investigated. Optimum cure time of the MGF composites filled with 2-dibuthylamino-4, 6-dithiol-s-triazine(DBT) was the fastest one, while maximum torque was the best in case of the silica composites filled with s-triazine-2,4,6-trithiol(TAT) on the Oscillating Disk Rheometer(ODR) test. Stress-strain curves of the composites showed that the physical properties such as 100% modulus, 300% modulus, tensile strength of the silica composites filled with DBT was very satisfactory and the silica composites filled with TAT was higher density of crosslinking than other crosslinked elastomer. In aging properties, elastomer filled DBT and TAT were progress post-curing reaction with increasing of aging time and it have been improved the tensile strength and crosslinking density.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.228-229
• /
• 2002

고온에서 장시간 사용된 재료는 재질의 열화현상으로 인하여 재료의 인성이나 물성이 저하되고 재료의 수명이 한계를 가지게 된다. 이러한 열화 되는 물리적, 기계적 특성 변화는 파괴적 또는 비파괴적 방법에 의해 측정이 가능하다. 비파괴적 방법은 대상기기의 평가부위가 한정된다는 단점이 있으나 실제 사용기기를 훼손하지 않고 재료의 상태를 파악할 수 있는 장점이 있기 때문에 파괴적 방법에 비하여 효율적이다. 재료의 인성이나 물성의 저하를 평가하는 여러 가지 비파괴적 방법들이 있지만 장시간 사용에 따른 열화정도를 판별할 수 있는 정량적인 비파괴적 방법은 아직까지 큰 성과를 얻지 못하고 있다. (중략)

• Journal of Korea Foundry Society
• /
• v.43 no.5
• /
• pp.223-229
• /
• 2023

In this study, STS316L produced by a double-melting process involving vacuum induction melting (VIM) and vacuum arc remelting (VAR) was subjected to extrusion and drawing to form a tube and was subsequently electrolytic polished (EP). The grain size of the obtained STS316L without EP was approximately 55 ㎛, with no difference found after EP. The thickness of the EP layer was measured by AES and TEM, showing values of approximately 10 nm and 15 nm, respectively. After EP, the Cr/Fe and CrO/FeO ratios of the passive layer increased from 1.48 to 1.62 and from 2.15 to 2.26, respectively, while the surface roughness decreased significantly from 0.255 to 0.024 ㎛. Consequently, the corrosion rate decreased in both NaCl and HCl solutions after the EP process. Additionally, the amounts of eluted Cr and Fe ions were reduced from 1.2 to 0.8 ppb and 10.3 to 0.8 ppb, respectively. Furthermore, polarization tests revealed that STS316L treated with EP required a lower current density to reach a passive state, indicating that corrosion behavior was retarded.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.209-218
• /
• 2000

This study was conducted to determine the content of trace metals in crops cultivated in Han-riverside, Anyang stream, Tan stream, and Jungryang stream. Trace metals (Pb, Cr, Cd, Fe, Zn, Cu, Hg) were detected in 36 crops, 285 samples by Atomic Absorption Spectrophotometer and Mercury Analyzer. The average concentration of trace metals in crop samples was in the order of Fe (34.592 ppm)>Mn (11.071 ppm)$\geq$Zn(8.853 ppm)>Cu(1.795 ppm)>Cr(0.237 ppm)>Pb(0.100 ppm)>Cd(0.011 ppm)>Hg(0.003 ppm). In crop samples, the contents of Fe, Cu, Mn, and Zn, which ranges were 0.004-203.083 ppm, 0.017~22.727 ppm, 0.000~74.373 ppm, 0.080~37.166 ppm, respectively, were relatively higher than those of Pb, Cd, Cr, and Hg, which ranges were 0.000~0.654 ppm, 0.000~0.270 ppm, 0.000~l.229 ppm, 0.000~0.037 ppm, respectively. The concentration of trace metals in crop samples was in the order of leafy vegetables > stem vegetables > root vegetables > fruity vegetables. In the root vegetables, such as radish, the content of Pb was leaf(0.055 ppm)>root(0.035 ppm), that of Cr, leaf (0.118 ppm)>root(0.031 ppm), that of Cd, leaf(0.004 ppm)>root(0.001 ppm), that of Hg, leaf(0.004 ppm)>root(0.001 ppm). As the results, it could be thought that root is the organ which doesn't accumulate the heavy metal ions, but absorb them.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.229-235
• /
• 1998

This paper reports the preparation and characterization of colored coatings of $SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu). Films of different compositions ranging from a molar content of transition metals of 5% to 20% have been prepared on soda-lime-silica slide glasses by the sol-gel process. The films have been characterized by a photospectroscopy. The color and reflectance of the films was expressed in Lab color chart and on spectra plot. 'L' as lightness and all reflectance decreased with increase of the content of transition metals. The coating of Co, Cu and Cr cotaining system showed light blue, green and lemon-yellowish color, respectively.

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.283-287
• /
• 2014

This study determined the hazardous heavy metal content of mushrooms from markets in Seoul, Korea. One hundred and fifty mushroom samples were digested by the microwave method then the hazardous heavy metal (Pb, Cd, As, Cr, Ni and Hg) content was determined by the inductively coupled plasma-mass spectrometry (ICP-MS) and mercury analyzer. The average values of heavy metals in the samples were as follows: (mean [minimum-maximum], ${\mu}g/kg$); Pb 7.8 (1.9-30.0), Cd 45.3 (0.7-292.4), As 54.6 (24.2-229.3), Cr 42.6 (8.4-334.3), Ni 22.4 (up to 180.4), and Hg 8.9 (2.0-25.0). The contents of hazardous heavy metal in mushrooms were lower than those reported previously and also lower than the Provisional Tolerable Weekly Intake (PTWI) limit prescribed by the FAO/WHO. Thus, it could be suggested that the hazardous heavy metals levels in the mushrooms of retail market were adequately safe for consumption.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.222-229
• /
• 1993

Total suspended particles in the atmosphere were collected on the quartz fiber filters using an ANdersen Hi-volume air sampler from March 1989 to October 1989 and from June 1990 to February 1991, at Chung-Ang University in Seoul. A total amount of eight heavy metals (Cr, Zn, Cd, Pb, Fe, V, Ti, Mn) in total suspended particles were determined by ICP spectrophotometer. The annual arithmetic mean concentration of total suspended particle was 162.3$\mug/m^3$ and eight metals(Cr, Zn, Cd, Pb, Fe, V, Ti, Mn) were 11.6, 609.2, 3.5, 337.1, 2739.5, 15.1, 89.4 and 100.5ng/$m^3$, respectively. The concentration of total suspended particle was highest in the spring(343.7$\mug/m^3$) and lowest in the summer(91.8$\mug/m^3$). These heavy metals were distinguished into two groups in terms of their particle size distribution. The contents of first-group heavy metals (Fe, Ti, Mn) were increased in accordance with the growth of the particle size. The contents of the second-group ones such as Pb, Cd, V, and Zn, on the contrary, came to increase according as the particle size reduced. Statistical analysis indicated that there was a correlation between total suspended particle and Fe in coarse particles, and between total Suspended Particle and Zn, Pb in fine particle.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.229-236
• /
• 2018

Accident-tolerant fuels (ATFs) are currently of high interest to researchers in the nuclear industry and in governmental and international organizations. One widely studied accident-tolerant fuel concept is multilayer cladding (also known as coated cladding). This concept is based on a traditional Zr-based alloy (Zircaloy-4, M5, E110, ZIRLO etc.) serving as a substrate. Different protective materials are applied to the substrate surface by various techniques, thus enhancing the accident tolerance of the fuel. This study focuses on the results of testing of Zircaloy-4 coated with pure chromium metal using the cold spray (CS) technique. In comparison with other deposition methods, e.g., Physical vapor deposition (PVD), laser coating, or Chemical vapor deposition techniques (CVD), the CS technique is more cost efficient due to lower energy consumption and high deposition rates, making it more suitable for industry-scale production. The Cr-coated samples were tested at different conditions ($500^{\circ}C$ steam, $1200^{\circ}C$ steam, and Pressurized water reactor (PWR) pressurization test) and were precharacterized and postcharacterized by various techniques, such as scanning electron microscopy, Energy-dispersive X-ray spectroscopy (EDX), or nanoindentation; results are discussed. Results of the steady-state fuel performance simulations using the Bison code predicted the concept's feasibility. It is concluded that CS Cr coating has high potential benefits but requires further optimization and out-of-pile and in-pile testing.