• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.85-90
• /
• 2018

This paper compares the adaptive eualization performance of CR-MMA (Constellation Reduction-MMA) and CR-MMA (Constellation Matching-MMA) in order to minimization of intersymbol interference that is occur in channel for 2-dimensional QAM signal. For obtain the error signal in order to updating the tap coefficient of conventional adaptive equalization algorithm MMA, the CR-MMA converts the constellation reduction concept of high order 2-dimensional QAM nonconstant modulus signal to constant modulus signal and the CM-MMA use the constellation matchine error concept in order to force the matching the $2^{nd}$ and $4^{th}$ cumulant of equalizer output and transmitted signal constellation. By applying the different method for getting the error signal, these algorithm are possible to obtain the improved equalization performance compared to the conventional MMA algorithm, the improved performance of CR-MMA and CM-MMA were compared by computer simulation in this paper. As a result of simulation, the CM-MMA has more better performance in the equalizer internal performance than CR-MMA, but not in equalizer external performance as in SER.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.85-90
• /
• 2018

This paper compares the equalization algorithm of CR-MMA (Constellation Reduction-Multi Modulus Algorithm) and FC-MMA (Fast Convergence-Multi Modulus Algorithm) for the compensation of channel's distortion in transmitting the 2 dimensional 16-QAM signals. The CR-MMA adaptive equalizer use the error signal by reduce the nonconstant modulus signal to constant modulus signal in order to updates the tap coefficient, and the FC-MMA adptive equalizer use the error signal applying the modified dispersion constant considering the number of symbol level instead of signal point reduction. These two algorithm are known to its superior to the convergence characteristic among the MMA series equalizer. In this paper, the other equalization performance including the convergence characteristic was compared by computer simulation. As a result of computer simulation, FC-MMA has more good performance in the residual isi, maximum distortion and SER performance than CR-MMA, but not in convergence speed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.107-113
• /
• 2019

This paper proposes the Hybrid-CRMMA adaptive equalization algorithm that is possible to improves the performance of CR-MMA based on adaptive modulus and adaptive stepsize. The 16-QAM nonconstant modulus signal is reduced to 4-QAM constant modulus signal, and the error signal were obtained based on the fixed statistic modulus of transmitted signal. It is possible to improving the currently MMA adaptive equalization performance. The proposed Hybrid-CRMMA composed of adaptive modulus which is propotional to the power of equalizer output and adaptive stepsize which is function of the nonlinearties of error signal, and its improved equalization performance were confirmed by computer simulation. For this purpose, the output signal constellation, the residual isi and maximum distortion and MSE that is for the convergence characteristics, the SER that is meaning the robustness of external noise of algorithm were used. As a result of computer simulation, it was confirmed that the proposed Hybrid-CRMMA has more superior performance in every index compared to currently CR-MMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.103-109
• /
• 2014

This paper related with the CR-MMA which is possible to improving the equalization performance by applying the concept of constellation reduction in the MMA adaptive equalization alogorithm in order to reduce the intersymbol interference that is occurred in the nonlinear communication channel. In the updating process of MMA adaptive equalizer, the error signal is being obtained by using the equalizer output, and the performance will be degraded by the increase the error signal in the high order QAM constellation. But by using the constellation reduction, the high order QAM signal will be changed to the 4-QAM signal constellation and then the error signal will be obtained. By doing so, the error signal will be minimized and it is possible to improve the equalization performance in the high order QAM transmitted signal. The Computer simulation was performed in order to compare the performance of the proposed CR-MMA algorithm and original MMA algorithm in the same communication channel and noise environment. For this, the recoverd signal constellation which is the output of equalizer, residual isi and MD (Maximum Distortion) learning curve which is represents the convergence performance and SER which is represents the roburstness of noise were used. As a result of simulation, the CR-MMA has more superior to the MMA. And it was confirmed that the CR-MMA has roburstness to the noise in the SER performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.87-92
• /
• 2017

This paper compares the equalization algorithm of CR-MMA (Constellation Reduction-Multi Modulus Algorithm) and RMMA (Region based Multi Modulus Algorithm) for the compensation of channel's distortion in nonconstant modulus signal. In order to obtain the error signal for adaptive equalization, every signal points are reduced to the constant modulus signal in CR-MMA and every signal points are separated into the 4 regions, then the reductions are performed based on this region in RMMA. These two algorithm based on the reduction principle such as in order to updating the tap coefficient in the adaptive equalization, it has different equalization performance. The computer simulation was performed in order to compare the each equalization performance in this paper. As a result of computer simulation, RMMA has more good performance in the residual isi, maximum distortion and SER performance than CR-MMA, but not in convergence speed.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.765-773
• /
• 2001

In In order to remove harmful trace elements such as $Co^{2+}$, $Ni^{2+}$ , $Cr_2O_7\;^{2-}$ from water, we synthesized AN-co-(MMA/IA) according to various mole ratio of monomers and spun by wet-spinning. And multi-functional PAN ion exchangers were prepared by hydrolysis. We observed structure, degree of functionalization, ion exchange capacity, distribution coefficient and mechanical properties for ion exchanger. Anion exchange capacity decreased in 4.5 ~ 4.2 meq/g with increasing of IA content and cation exchange capacity increased in 1.8 ~ 2.2 meq/g. Tensile strength of the ion exchanger increased up to 0.008 mol% IA content and appeared maximum value by 216$kg/cm^2$Distribution coefficient for AN-co-(MMA/IA) ion exchanger appeared maximum value for Co(II), Ni(II) in pH 5-6 range and for Cr(III) in pH 3-4 range. And the adsorption capacity was in the order of Cr(III) > Co(II) > Ni(II) for multicomponent in continuous process.

• Elastomers and Composites
• /
• v.24 no.4
• /
• pp.265-275
• /
• 1989

The graft copolymerizations of acrylonitrile (AN) and methyl methacrylate (MMA) onto chloroprene rubber (CR) were carried out with benzoyl peroxide(BPO) as an initiator. The effect of solvent, mole ratio of AN to MMA, reaction time and temperature, and initiator concentration on graft copolymerization were examined. It was observed that the grafting efficiency increased as increasing mole ratio of AN to MMA. the graft copolymer, acrylonitrile- CR-methyl methacrylate (ACM), was identified by infrared spectroscopy and morphology. Thermal stability of ACM was found to be improved when compared with those of CR.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.209-223
• /
• 1998

The aim of this study was to evaluate welders' exposure to hexavalent chromium (Cr(VI)) and nickel (Ni) during welding operations in a Korean shipyard. The airborne Cr(VI) and Ni concentrations were measured during metal inert gas (MIG) welding on mild and stainless steel, and manual metal arc (MMA) welding on mild steel. The geometric mean (GM) of Cr(VI) concentrations inside the welding helmet during MIG welding on mild steel were $0.0018mg/m^3$ inside a ship section, and $0.0015-0.0026mg/m^3$ at the welding shops. All of the personal breathing zone air samples were below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$) of $0.01mg/m^3$. Conversely, eighty-eight percent(21 of 24) of the personal breathing zone air samples exceeded the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit of $0.001mg/m^3$. Ni was not detected on 20 of 23 air samples collected during MIG welding on mild steel. The three Ni samples above the limit of detection ranged from 0.015 to $0.044mg/m^3$. The GM of Cr(VI) concentrations during MMA welding on mild steel were $0.0013mg/m^3$, but Ni was not detected in the air samples during this operation. It is assumed that the airborne Cr(VI) and Ni during mild steel welding were derived from the base metals which contained about 0.03% Cr and 0.03% Ni. The GM of airborne total Cr, Cr(VI) and Ni concentrations during MIG welding on stainless steel were 4.02, 0.13 and $0.86mg/m^3$, respectively, and the levels of Cr(VI) and Ni were above the ACGIH-$TLV^{(R)}$. Cr(VI) comprised about 35.5% of the total chromium(Cr) from MIG welding on mild steel, and about 8.4% of total Cr from MIG welding on stainless steel. The ratios of Cr(VI) to total Cr were significantly different among welding shops. It was concluded that welders were exposed to high levels of Cr(VI) and Ni during welding on stainless steel, and were exposed to low levels of Cr(VI) even during welding on mild steel.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.36-40
• /
• 2003

An attractive combination of corrosion resistance and mechanical properties in the temperature range -50 to $250^{\circ}C$ is offered by duplex stainless steel. However, undesirable secondary precipitation phase such as $\sigma$, $\gamma_2$ and $Cr_2N$ may taken place at the cooling stage from the welding processes. Therefore, this paper describes the influence of different welding procedures such as manual metal arc welding (MMA), tungsten inert gas welding (TIG) and vacuum brazing on corrosion resistance of the welded joint for UNS S31803 duplex stainless steel. Microstructure and chemical compositions of the welded joint were examined. The weight loss of specimens immersed in 6% $FeCl_3$ solution at $47.5^{\circ}C$ for 24-hours was determined and used to evaluate the pitting resistance of duplex stainless steel and their welds. The region of heat-affected zone of specimen obtained by the MMA is much wider than that resulted from TIG, therefore, the weight loss of welds by MMA was larger than that of weld by TIG. The weight loss of brazed specimens cooled from slow cooling rate was larger than those of specimens cooled from high cooling rate, because the precipitation of $\sigma$ phase. Beside that, the weight loss of brazed specimen is greater than those of the welded specimens. The galvanic corrosion was observed in brazed duplex stainless steel joints in the chloride solution.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.100-106
• /
• 2007

In this paper, first we went through the deliming and degreasing as pre-treatment of limed pelt scrap which is derived from liming process during leather manufacturing processing. After that, we produced fine collagen using non-chrome tanning and heat treatment and using acryl monomer graft polymerization such as GMA and MMA. From the comparisonof final products made by various methods, they showed good features in pyrolysis temperature, heat-resisting, variation of moisture content and particle distribution.