• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.59-64
• /
• 2006

Ion exchange resin particles should not be found in steam generator(S/G) sludge. The suspicious spherical resin particles observed in S/G sludge sample were characterized for particle size distribution under optical microscope using the micro-technique, for element analysis by the electron probe micro analysis (EPMA), and for molecular identification by the IR spectroscopy. The particle sizes are distributed from 1 to $200{\mu}m$ for the sludge, while 40 to $500{\mu}m$ for the spherical resin particles. The results of the elemental analysis showed different major impurities: Si, Al, Mn, Cr, Ni, Zn and Ti for the sludge particles, while Si, Cu, Zn for the spherical resin particles. However, both particles contain Fe as a matrix of magnetite $(Fe_3O_4)$. IR spectrum of the spherical particles was not quite similar to the IR spectrum of ion exchange resins used in S/G system. These results indicate that the spherical particles are not related to ion exchange resin particles and may be formed by the process of the sludge formation.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.7
• /
• pp.485-491
• /
• 2011

This study was performed to investigate the characteristics of nutrient removal of municipal wastewater in membrane bioreactor system. Membrane bioreactor consists of four reactors such as two intermittently anaerobic tanks, the oxic tank and the sludge solubilizaion tank with an internal recycle. The hydraulic retention time (HRT) and flux were 6.5 hours and $20.4L/m^2{\cdot}hr$ (LMH), respectively. The removal efficiency of $COD_{Cr}$, SS, TN and TP were 94.0%, 99.3%, 99.9%, 69.9%, and 66.9%, respectively. The estimated true biomass yield, specific denitrification rate (SDNR), specific nitrification rate (SNR), specific phosphorus release rate (SPRR) and specific phosphorus uptake rate (SPUR) were 0.34 kgVSS/kgBOD d, $0.067mgNO_3-N/mgVSS{\cdot}d$, $0.028mgNH_4-N/mgVSS{\cdot}d$, 16.0 mgP/gVSS d and 2.1 mgP/gVSS d, respectively. The contents of nitrogen and phosphorus of biomass were 8.9% and 3.5% on an average.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.442-450
• /
• 2001

In this study, we collected PM10(particulate matter less than $10{\mu}m$) by using a high volume air sampler from March 2000 to September 2000 to investigate the contamination level and the distribution characteristics of heavy metals in the ambient air in Ulsan area. Samples were pretreated by the microwave extraction methods, and heaby metals (Cr, Cu, Zn, Cd, Ni, As, and Pb) were quantified by using and ICP-MS system. The highest PM10 concentrations in the ambient air were $85.6{\mu}g/m^3$ and the aberage value was $37.1{\mu}g/m^3$. The maximum levels of each heavy metal were as follows: $2.5{\mu}g/m^3$ for Fe(Yeocheon-dong), $0.41{\mu}g/m^3$ for Zn(Nammok-2-dong), $0.061{\mu}g/m^3$ for Cd(Yeocheon-dong), $0.20{\mu}g/m^3$ for Pb(Yeocheon-dong), $0.037{\mu}g/m^3$ for Ni(Yeoncheon-dong), $0.88{\mu}g/m^3$ for Cu(Yaeum-dong), $0.042{\mu}g/m^3$ for Cr(Yaeum-dong), and $0.015{\mu}g/m^3$ for As(Onsan). Among concentration of heavy metals, Ni and Zn compounds were highly correlated with a correlation coefficient of 0.87 at Nammok-2-dong.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.71-76
• /
• 2001

Recently, sludge disposal becomes one of the most serious environmental problems. Because the landfilling and ocean dumping of sludge materials will be prohibited in the near future, the proper treatment?disposal methods should be investigated. Also, oyster shells, piled at the coast, cause adverse effects in coastal fishery, public water surface, natural landscape, public health and so on. Thus, the purpose of this study is to evaluate the dissolution characteristic of metal compounds during soil application experiment using sewage treatment sludge mixed with oyster shells. The dissolution experiment conducted 100days under artificial rainfall and farming soil, mixed with sewage treatment sludge and oyster shells, was put into the pots(approx. 0.5L). The results from dissolution experiment as follows. 1. K, Na was $5{\sim}20mg/{\ell}$, and Ca was less than $90mg/{\ell}$. 2. Heavy metals such as Cd, Cu, As, Pb, Cr, Hg are dissoluted far less than the soil pollution guideline. The application of sewage sludge mixed with oyster shells increases pH(soil acidity)and buffer capacity(CEC) of farming soil, and heavy metals are thought to be attached to soil as insoluble forms.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.4
• /
• pp.202-209
• /
• 2002

The stochiometric mix of evaporating materials for the $CuInSe_2$single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CuInSe_2$compound crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $620^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuInSe_2$single crystal thin films measured from Hall effect by van der Pauw method. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $CuInSe_2$single crystal thin film, we have found that the values of spin orbit splitting $\Delta$So and the crystal field splitting $\Delta$Cr. From the photoluminescence measurement on $CuInSe_2$single crystal thin film, we observed free exciton ($E_x$) existing only high quality crystal and neutral bound exciton ($A^{\circ}$, X) having very strong peak intensity. Then, the full-width-at-half-maximum (FWHM) and binding energy of neutral donor bound exciton were 7 meV and 5.9 meV, respectivity. By haynes rule, an activation energy of impurity was 59 meV.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.145-152
• /
• 2002

This experiment was conducted to investigate the efficiency and compatibility of the coagulation and settling processes of leachates from the compost of two swine farms. And results obtained are as follows : 1 In the farm A where $COD_{Cr}$, $COD_{Mn}$ and $BOD_5$ of original leachate were 4,400, 2,950 and 87mg/l, respectively, the rate of coagulation and settling process was more efficient in the leachate treated with the conjugate of Alum and cation polymer than that of Alum and anion polymer. The concentrations of BOD$_{5}$, T-N and T-P of the effluent after treatment with the conjugate of Alum and cation polymer under the optimum condition were 19, 257.5 and 0.4mg/l, respectively which are under the governmental regulation level. 2. In the farm B where $COD_{Cr}$, $COD_{Mn}$ and $BOD_5$ of original leachate were 4,720, 3,040 and 95mg/l, respectively, the conjugate of $FeCl_3$, 1,500mg/l and cation polymer 10mg/l ($FeCl_3$+FO4240) was most effective coagulation and settling agent compared with the others. The concentrations of BOD$_{5}$, T-N and T-P of the effluent after treatment with $FeCl_3$+FO4240 were 15.3, 829.4 and 2.8mg/l, respectively. And the concentration of T-N was higher than the governmental regulation level, presumably because of too high concentration of NH$_4$$^{+}$-N in the leachate.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2010.06a
• /
• pp.79-79
• /
• 2010

Semimetallic bismuth (Bi) has been extensively investigated over the last decade since it exhibits very intriguing transport properties due to their highly anisotropic Fermi surface, low carrier concentration, long carrier mean free path l, and small effective carrier mass $m^*$. In particular, the great interest in Bi nanowires lies in the development of nanowire fabrication methods and the opportunity for exploring novel low-dimensional phenomena as well as practical application such as thermoelectricity[1]. In this work, we introduce a self-assembled interconnection of nanostructures produced by an on-film formation of nanowires (OFF-ON) method in order to form a highly ohmic Bi nanobridge. A Bi thin film was first deposited on a thermally oxidized Si (100) substrate at a rate of $40\;{\AA}/s$ by radio frequency (RF) sputtering at 300 K. The sputter system was kept in an ultra high vacuum (UHV) of $10^{-6}$ Torr before deposition, and sputtering was performed under an Ar gas pressure of 2m Torr for 180s. For the lateral growth of Bi nanowires, we sputtered a thin Cr (or $SiO_2$) layer on top of the Bi film. The Bi thin films were subsequently put into a custom-made vacuum furnace for thermal annealing to grow Bi nanowires by the OFF-ON method. After thermal annealing, the Bi nanowires cannot be pushed out from the topside of the Bi films due to the Cr (or $SiO_2$) layer. Instead, Bi nanowires grow laterally as a mean s of releasing the compressive stress. We fabricated a self-assembled Bi nanobridge (d=192 nm) device in-situ using OFF-ON through annealing at $250^{\circ}C$ for 10hours. From I-V measurements taken on the Bi nanobridge device, contacts to the nanobridge were found highly ohmic. The quality of the Bi nanobridge was also proved by the high MR of 123% obtained from transverse MR measurements. These results manifest the possibility of self-assembled nanowire interconnection between various nanostructures for a variety of applications and provide a simple device fabrication method to investigate transport properties on nanowires without complex patterning and etching processes.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.1-9
• /
• 2012

According to the agreement on WTO/TBT, we are under the situation to adopt international standard (ISO standard) as a national standard if it exists. However, in case of environmental area, it is a domestic legal obligation to use Korean environmental standard method(KESM) for analyzing various contaminants. Therefore it is necessary to assess the comparability between KEM and ISO standard prior to apply ISO standard to soil conservation law in Korea. The main purpose of this study is to assess the comparability of both methods for analyzing heavy metals in soil. We looked over various aspects like pre-treatment, calibration curve range, detection wavelength, soil organic matter content and so on. Apparently, the procedure of both methods is almost same. However in details, both methods are different in stationary time before aqua-regia extraction using reflux system, calibration curve range for Cu, Pb, Ni and measuring wavelength for Pb. According to the results of comparison test, the results were significantly different when the different calibration range was used. In case that all the extracts independent of methods were reanalyzed with the same calibration range of each method, both methods showed statistically same results. Other conditions like different stationary time, measuring wavelength of AAS and soil organic matter content did not have any influence on the analytical result. Therefore, we suggest to extend the calibration curve range to 0~8 mg/L which is used in KS I ISO standard(Korean standard related with environment which is translation version of ISO standard without any technical change). In case of $Cr^{6+}$, the results showed no significant differences between two methods even though the pretreatment, instrumentation and other analysis conditions were different. In addition to UV/Visble spectrometry of KESM for soil contamination, we suggest to adopt ion chromatography of ISO 15192(US EPA method 7199) for analyzing $Cr^{6+}$ with the consideration of laboratory work efficiency.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.5
• /
• pp.179-186
• /
• 2007

Single crystal $CdGa_2Se_4$ layers were grown on a thoroughly etched semi-insulating GaAs(100) substrate at $420^{\circ}C$ with the hot wall epitaxy(HWE) system by evaporating the polycrystal source of $CdGa_2Se_4$ at $630^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of single crystal $CdGa_2Se_4$ thin films measured with Hall effect by van der Pauw method are $8.27{\times}10^{17}cm^{-3},\;345cm^2/V{\cdot}s$ at 293 K, respectively. The photocurrent and the absorption spectra of $CdGa_2Se_4/SI$(Semi-Insulated) GaAs(100) are measured ranging from 293 K to 10 K. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation $E_g(T)=2.6400eV-(7.721{\times}10^{-4}eV/K)T^2/(T+399K)$. Using the photocurrent spectra and the Hopfield quasicubic model, the crystal field energy(${\Delta}cr$) and the spin-orbit splitting energy(${\Delta}so$) far the valence band of the $CdGa_2Se_4$ have been estimated to be 106.5 meV and 418.9 meV at 10 K, respectively. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1^-},\;B_{1^-},\;and\;C_{11}-exciton$ peaks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1339-1349
• /
• 2008

In this paper, a nonlinear relationship between an input complex envelope and an output complex envelope of m-th harmonic zone is theoretically analyzed, and AM/$AM_m$ and AM/$PM_m$ are defined. A scheme to extract these characteristics from measured in-phase and quadrature-phase data is suggested. The proposed analysis is verified with a fundamental-fundamental and fundamental-third harmonic measurements for a InGaP power amplifier(PA). Based on the harmonic-band nonlinear analysis and extraction scheme, a new technique to send a signal in m-th harmonic band with a harmonic signal Linearization Digital Predistortion(DPD) scheme is presented. A numerical analysis and a Look-Up Table(LUT) based DPD algorithms to linearize output signal on m-th harmonic zone are developed. For a 16- and a 64-QAM input signals, a DPD for third harmonic signal linearization is implemented, and output spectrum and signal constellation are measured. The wholly distorted signals are linearized, and thus the measured Error Vector Magnitudes (EVM) are 6.4 % and 6.5 % respectively. The results show that a proposed scheme linearizes a nonlinearly distorted harmonic band signals. The proposed nonlinear analysis and predistortion scheme can be applied to multiband transmitter in next generation software defined radio(SDR)/cognitive radio(CR) wireless system.