• Title/Summary/Keyword: CR

Search Result 9,261, Processing Time 0.036 seconds

Compression Sensing Technique for Efficient Structural Health Monitoring - Focusing on Optimization of CAFB and Shaking Table Test Using Kobe Seismic Waveforms (효율적인 SHM을 위한 압축센싱 기술 - Kobe 지진파형을 이용한 CAFB의 최적화 및 지진응답실험 중심으로)

  • Heo, Gwang-Hee;Lee, Chin-Ok;Seo, Sang-Gu;Jeong, Yu-Seung;Jeon, Joon-Ryong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.24 no.2
    • /
    • pp.23-32
    • /
    • 2020
  • The compression sensing technology, CAFB, was developed to obtain the raw signal of the target structure by compressing it into a signal of the intended frequency range. At this point, for compression sensing, the CAFB can be optimized for various reference signals depending on the desired frequency range of the target structure. In addition, optimized CAFB should be able to efficiently compress the effective structural answers of the target structure even in sudden/dangerous conditions such as earthquakes. In this paper, the targeted frequency range for efficient structural integrity monitoring of relatively flexible structures was set below 10Hz, and the optimization method of CAFB for this purpose and the seismic response performance of CAFB in seismic conditions were evaluated experimentally. To this end, in this paper, CAFB was first optimized using Kobe seismic waveform, and embedded it in its own wireless IDAQ system. In addition, seismic response tests were conducted on two span bridges using Kobe seismic waveform. Finally, using an IDAQ system with built-in CAFB, the seismic response of the two-span bridge was wirelessly obtained, and the compression signal obtained was cross-referenced with the raw signal. From the results of the experiment, the compression signal showed excellent response performance and data compression effects in relation to the raw signal, and CAFB was able to effectively compress and sensitize the effective structural response of the structure even in seismic situations. Finally, in this paper, the optimization method of CAFB was presented to suit the intended frequency range (less than 10Hz), and CAFB proved to be an economical and efficient data compression sensing technology for instrumentation-monitoring of seismic conditions.

Effects of Germanium-fortified Yeast on the Serum Lipids and Immune Cell Subset (게르마늄강화효모가 혈청지질 및 면역세포변화에 미치는 영향)

  • Lee, Sung-Hee;Oh, Sun-Woo;Rho, Sook-Nyung;Lee, Bog-Hieu;Lee, Hyun-Joo;Jin, Dong-Kyu
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.35 no.6
    • /
    • pp.683-689
    • /
    • 2006
  • This study was established to investigate the effect of germanium-fortified yeasts on the serum lipid composition and immune system of human body. All 50 subjects with the age range of $50{\sim}75$ were entered in this clinical trial for 6 months. The effects were determined by the proliferative responses of immune-mediated cells, T-cell, B-cell and NK-cell during daily supplementation with/without germanium-fortified yeast. The results of hematology and blood chemistry didn't show any significant differences during administration periods. Serum lipid compositions also didn't show any significant differences during administration periods except triglyceride (TG) and VLDL-cholesterol. TG and VLDL-cholesterol levels were increased significantly by the consumption of germanium-fortified yeast (p<0.05). Immune mediated T-celt and NK-cell didn't increased in both control and test group supplemented with germanium fortified yeast, while B-cell increased in the germanium fortified yeast group after 8 week (p<0.05). Also $TNF-{\alpha}$ increased in the group of germanium fortified yeast after 8 week (p<0.05) but not in the control group. From the above results, germanium fortified yeast is expected to be useful on the improvement of the cellular immune response and protection of organs from various chronic diseases.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2000.04a
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

Petrography and Geochemistry of the Ultramafic Rocks from the Hongseong and Kwangcheon areas, Chungcheongnam-Do. (충남 홍성 및 광천 지역 초염기성암의 암석 및 지구화학)

  • Song Suckhwan;Choi Seon Gyu;Oh Chang Hwan;Seo Ji Eun;Choi Seongho
    • Economic and Environmental Geology
    • /
    • v.37 no.5
    • /
    • pp.477-497
    • /
    • 2004
  • In the Hongseong and Kwangcheon areas, two ultramafic rocks are exposed as isolated bodies in the Precambrian Kyeonggi gneiss complex. The ultramafic rocks extend for several hundred meters to NNE direction and are contact with adjacent metasediments by steeply dipping faults. The rocks are dunite or harzburgite showing dominantly equigranular-mosaic and protogranular textures with a minor amount of porphyroclastic textures. They contain varying amounts of fosteritic olivine (F$o_{0.91-0.93}$), magnesian pyroxene (E$n_{0.89-0.93}$) and tremolitic to magnesian hornblende with minor amounts of spinel, serpentine, chlorite, magnetite, phlogopite and talc. The rocks are in contrast with adjacent gneiss complex or metabasite (amphibole, biotite, plagioclase, alkali-feldspar and quartz). Geochemically, these ultramafic rocks are characterized by high magnesium number (M$g_#$> 0.88) and transitional element (mainly, Ni>1716 ppm, Cr>1789 ppm), low alkali element (e.g. $K_2$O<0.09 wt.%, Na$_2$O<0.19 wt.%) and depletion of incompatible elements. The calculated correlation coefficients showed good positive correlations among the ferrous (e.g. Sc, V, Zn) elements, incompatible elements (e.g. REE), and among SiO$_2$ or $Al_2$O$_3$ with ferrous elements, whereas negative correlations are appeared between Ni and major elements. These results involve increasing of the ferrous- and $Al_2$O$_3$-bearing minerals(e.g. amphibole and mica) with decreasing of Mg-bearing minerals (e.g. olivine) depending on the degree of alteration. Calculated geothermometries and mineral assemblages suggest that the ultramafic rocks have been metamorphosed through the condition from the greenschist to amphibolite facies. Compared with ultramafic rocks elsewhere, it is thought that those of the Hongseong and Kwangcheon areas are derivatives of the depleted sources since they are depleted in incompatible elements including REE abundances. Moreover overall characteristics of the ultramafic rocks are similar to the those of orogenic related Alpine type ultramafic rocks, especially, shallow mantle slab varieties.

Assessment on the Content of Heavy Metal in Orchard Soils in Middle Part of Korea (중부지역 과수원 토양중의 중금속 함량 평가)

  • Jung, Goo-Bok;Kim, Won-Il;Lee, Jong-Sik;Shin, Joung-Du;Kim, Jin-Ho;Yun, Sun-Gang
    • Korean Journal of Environmental Agriculture
    • /
    • v.23 no.1
    • /
    • pp.15-21
    • /
    • 2004
  • Objectives of this study were to monitor the distribution of heavy metals, to compare extractable heavy metal with total content and to investigate the relationships between soil physico-chemical properties and heavy metals in orchard soil. Sampling sites were 48 in Gyeonggi, 36 in Gangwon, 36 in Chungbuk, and 44 in Chungnam, Soils were collected farm form two depths, 0 to 20 and 20 to 40 cm (here after referred to as upper and lower layers) from March to May in 1998. Total contents of heavy metal in soils were analyzed by ICP-OES after acid digestion ($HNO_3$:HCl:$H_2O_2$) whereas extractable contents were measured after successive extraction of 0.1N-HCl, 0.05 M-EDTA, and 0.005 M-DTPA. Mercury was analysed by mercury atomizer. The average contents of Cd Cu, and Pb in the extractant with 0.1N-HCl at upper layer were 0.080, 4.23, and 3.42 mg/kg, respectively. As content in the extractant with 1N-HCl was 0.44 mg/kg, and total contents of Zn, Ni and Hg were 78.9, 16.1, and 0.052 mg/kg, respectively. The ratios of concentrations of heavy metals to threshold values (Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/ke in Soil Environmental Conservation Act in Korea (2001) were low in the range of $1/2.5{\sim}1/76.9$ in orchard soils. The ratios of extractable heavy metal to total content ranged $5.4{\sim}9.21%$ for Cd, $27.9{\sim}47.8%$ for Cu, $12.6{\sim}21.8$% for Pb, $15.8{\sim}20.3%$ for Zn, $5.3{\sim}6.3%$ for Ni, and $0.7{\sim}3.6%$ for Zn, respectively. Cu and Pb contents in 0.05 M-EDTA extractable solution were higher than those in the other extractable solution. Total contents of Cd, Ni and Ni in soils were negatively correlated with sand content but positively correlated with silt and clay contents. Ratios of extractable heavy metal to total content were negatively correlated with clay content but ai and Ni contents were positively correlated with soil pH, organic matter, and available phosphorous. Therefore, the orchard soil was safe because the heavy metal contents of orchard soil were very low as compared to its threshold value in the Soil Environmental Conservation Act. However, it need to consider the input of agricultural materials to the agricultural land for farming practices for assessment of heavy metals.

Development of soil certified reference material for determination of the hazardous elements (유해원소 측정용 토양 인증표준물질 개발)

  • Kim, In-Jung;Min, Hyung-Sik;Suh, Jung-Ki;Han, Myung-Sub;Lim, Myung-Chul;Kim, Young-Hee;Shin, Sun-Kyoung;Cho, Kyung-Haeng
    • Analytical Science and Technology
    • /
    • v.23 no.5
    • /
    • pp.485-491
    • /
    • 2010
  • A certified reference material (CRM) of KRISS 109-03-SSD was developed for the analysis of hazardous elements in soil. The target elements were As, Cd, Cr, Cu, Hg, Ni, Pb, Zn being regulated by the Soil Environment Conservation Act. Starting material was collected from tailing dump of an unworked tungsten mine at Sangdong (Gangwon-do, Korea). The starting material under-went through a series of fabricating process steps of screening, drying, grinding, sieving, blending, bottling, sterilization and was certified according to the ISO Guide 35. Isotope dilution-inductively coupled mass spectrometry (ID-ICP/MS) and instrumental neutron activation analysis (INAA) were used for the measurement. Homogeneity was tested according to ISO 13528 annex B. The certified values were determined using the results from two different methods or from two independent measurements using a method. Finally, certified values of seven elements of arsenic, cadmium, chromium, copper, lead, nickel and zinc were determined. Mercury did not satisfied the criteria of homogeneity and the result would be provided for information only, together with iron and tungsten. It was also studied, the extractable fraction of elements by aqua regia according to the ISO 11466 protocol being frequently studied for the purpose of environmental monitoring. It was performed as a inter-laboratory study by 6 laboratories of a public institute and universities. Standard deviation among the laboratories was much bigger than the uncertainty of the certified value. The result of inter-laboratory study on the extractable fraction will be provided for information, only.

The Radiotherapeutic Significance of Serum NSE Level in Non-Small Cell Lung Cancers(NSCLC) (비 소세포성 폐암의 방사선 치료에서 혈청내 NSE 치의 중요성)

  • Yun Sang Mo;Kim Sang Bo;Park In Kyu;Jung Tae Hoon
    • Radiation Oncology Journal
    • /
    • v.12 no.1
    • /
    • pp.73-80
    • /
    • 1994
  • From December 1989 to February 1993, 108 patients with Non-Small Cell Lung Cancers(NSCLC) were studied retrospectively to evaluate radiotherapeutic significance of serum levels of NSE. We considered elevated serum neuron specific enolase(S-NSE) level as one of the neuroendocrine features in NSCLC. Histopathologic evaluation revealed 86 squamous cell carcinomas, 11 adenocarcinomas.3 large cell carcinomas, 3 mucoepidermoid carcinomas, and 5 unknown pathology. Eight Patients had stage 1,40 stage IlIA, and 60 stage lIIB.S-NSE level greater than 15 ng/ml was considered as elevated, and below this considered as normal. All patients recieved radiotherapy as primary treatment modality. The responders to radiotherapy had significantly higher mean S-NSE level than non-responders (28.5 ng/ml vs 20 ng/ml, p=0.01). Overall 2-year survival rate(YSR) was 23.6$ \% $. According to radiotherapy response, 2 YSR for Patients with CR, PR, and NR were 39.2$ \% $, 28.6$ \% $, and 6.2$ \% $ respectively(p=0.001). 2 YSR for patients with elevated and normal S-NSE were 14.6$ \% $ and 31.7$ \% $(p=0.02). The patients with NR showed no difference in survival according to S-NSE level. When we considered all patients, S-NSE level showed no significant impact on response. But for squamous cell carcinomas alone, patients with elevated S-NSE had more responders(80$ \% $ vs 61$ \% $, p=0.05). There was no correlation between tumor characteristics and S-NSE level. But the patients with elevated S-NSE had more patients with higher nodal stage, Based on our and other datas, NSCLC with neuroendocrine features have different response to treatment and clinical behavior compared to other NSCLC. Thus, this subgroup may need different treatment modality, and S-NSE level may have prognostic significance.

  • PDF

Effects of Conventional and Organic Cultivation on Growth and Quality of Carrot (관행 및 유기농 재배가 당근의 생육과 품질에 미치는 영향)

  • Jeon, Ji-Young;Kwon, Sung-Ae;Bak, Min-Kyung;Jee, Hyung-Jin;Lee, Yeon;Kim, Byun-Sup;Yeoung, Young-Rog
    • Proceedings of the Korean Society of Organic Agriculture Conference
    • /
    • 2009.12a
    • /
    • pp.289-289
    • /
    • 2009
  • 당근은 우리나라에서 재배되고 있는 채소 중에서 대표적인 비타민 A의 급원으로서 매우 중요한 근채류이다. 최근 친환경농산물에 대한 관심과 요구가 급증하면서 소비자들은 고품질 당근을 선호하고 있으나 유기농 당근생산에 대한 연구가 미비한 실정이다. 본 연구는 관행 및 유기농 재배가 당근의 생육과 품질에 미치는 영향을 구명하고자 실시하였다. 본 실험에 사용된 공시품종은 '조춘5촌당근'(세미니스, A), '선홍봄5촌당근'(농우종묘, B), '홍심5촌당근'(대농종묘, C), '춘홍5촌당근'(사카타, D), '하파5촌당근'(신젠타종묘, E), '홍심5촌당근'(경신종묘, F)으로 전체 6개 품종이며, 경기도 평택시 유천동 대농종묘(주) 육종연구소 N2, N3 하우스에 9월 8일 파종하였고 재배방법은 유기농 및 관행재배표준법에 준하여 실시하였다. 관행과 유기농 재배 후 12월 3일에 수확하여 엽중, 근중, 근장, 근경, 코어, 추근성, 근피색과 가용성 당함량을 조사하였다. 근피색은 Colorimeter(Minolta, CR-400)를 이용하여 Hunter값인 L(밝기), a(녹색-적색), 그리고 b(파란색-노란색)로 표시하였다. 가용성 당함량 조사는 HPLC를 이용하여 분석하였다. 엽중은 유기농 재배 F품종에서 26.0g으로 가장 무거웠고 전체적으로 유기농 재배구에 비해 관행 재배구에서 엽중이 무거웠다. 근장은 모든 품종에서 관행구에 비해 유기농 재배구에서 현저히 길게 나타나 재배 방법 간의 유의차를 보였으며 유기농 재배의 경우 근장이 17.9cm ~ 19.0cm 범위로 품종간 유의성은 없었다. 근중은 전체적으로 관행 재배구가 우수하거나 유기농 재배구와 비슷한 경향을 보였고, 특히 관행 재배구 B품종이 58.1g, A품종이 57.1g으로 가장 무겁게 나타나 재배방법 및 품종간 비교에서 우위를 나타냈다. 당근 뿌리의 명도를 나타내는 Hunter L값은 모든 품종에서 관행 재배구가 높게 나타났으며 특히 관행재배구의 최하위 L값(45.80)이 유기농 재배구의 최상위 L값(44.81)이 보다 높게 나타나 관행 재배를했을 경우 뿌리 광택이 더욱 우수함을 알 수 있었다. Hunter b값은 노란색을 나타내는데 B품종에서 유기농 재배구 19.68, 관행 재배구 19.55로 모든 품종 중에서 가장 높은 수치를 보였다. Fructose 함량은 D품종이 관행 재배구와 유기농 재배구에서 각각 $8.5mg{\cdot}g^{-1}FW,\;8.3mg{\cdot}g^{-1}FW$을 함유하여 가장 많게 나타났고, glucose 함량은 관행 재배구에서 D품종이 $41.5mg{\cdot}g^{-1}FW$을 함유하여 가장 많았고 유기농 재배구에서도 역시 D품종이 $35.7mg{\cdot}g^{-1}FW$을 함유하여 가장 많게 나타났다. Sucrose 함량은 모든 품종의 관행 재배구에서 현저하게 높게 나타났다. 가용성 당함량은 F품종만이 유기농 재배구에서 높게 나타났지만, 다른 5개 품종의 관행 재배구와 비교했을 때는 가장 적은 수치를 나타내 적절한 비배관리를 통한 관행 재배 방법이 가용성 당함량을 증가시킨 것으로 생각된다. 결론적으로 생육 및 품질은 관행재배에서 유기농 재배에 비해 우수하였고 근장은 유기농재배에서 길게 나타났고 가용성당람량 역시 관행재배에서 대체적으로 높게 나타났지만 품종에 따라 유기농재배에서도 높게 조사된 것도 있어 앞으로 유기농 재배에 적합한 당근 품종선발이 필요하다.

  • PDF

Mutational Analysis of Mitochondria DNA in Children with IgA Nephropathy (소아 IgA 신병증 환자에서 미토콘드리아 DNA 돌연변이 분석)

  • Eom, Tae Min;Jang, Chang-Han;Kim, Hyoung Kyu;Kim, Nari;Chung, Yun Seo;Han, Jin;Chung, Woo Yeong
    • Childhood Kidney Diseases
    • /
    • v.16 no.2
    • /
    • pp.73-79
    • /
    • 2012
  • Purpose: The association of mitochondrial DNA (mtDNA) mutations, deletions and copy number with progressive changes in patients with some glomerular disease and end-stage renal disease have been reported. In this study, we performed mtDNA mutation analysis in children with IgA nephropathy to investigate its role in progressive clinical course. Methods: Seven children with IgA nephropathy were involved in this study. MtDNA isolated from platelet was amplified by PCR and sequenced entirely. Results: The mean age at renal biopsy was $11.5{\pm}2.2$ year and the mean age at latest evaluation was $17.9{\pm}3.2$ year. The mean follow-up period were $7.8{\pm}3.1$ years. Patients was divided into 2 groups according to the amount of proteinuria at presenting manifestation. Group 2 patients were nephrotic syndrome. Renal function reveals within normal range in all patients. In group 2 patients, the mean serum albumin level was significantly lower than those of group 1 ($3.7{\pm}0.6g/dL$ vs. $4.7{\pm}0.2g/dL$, P=0.0241) and the mean total cholesterol level was significantly higher than those of group 1 ($222.7{\pm}35.7mg/dL$ vs. $148.3{\pm}29.1mg/dL$, P=0.0283). In Group 2 patients, total amount of protein of 24 hour collected urine also significantly higher than those of group 1 ($1,466.0{\pm}742.5mg$ vs. $122.5{\pm}48.1mg$, P=0.0135). Pr/Cr ratio in random urine sample was also higher in group 2 than those of group 1 but the statistical significance was not noted ($1.8{\pm}1.6$ vs. $0.2{\pm}0.2$, P=0.0961). Deletion of mtDNA nt 8272-8281 were observed in two patients, one patient in each groups, respectively. This is noncoding lesion. No patients demonstrated the mtDNA mutations. Conclusions: We have identified a deletion of mtDNA nt 8272-8281 in two children with IgA nephropathy. Further studies are needed to clarify the role of mitochondrial function in the progressive change of IgA nephropathy.

Radiation Therapy Results of the Non-Hodgkin's Lymphoma of the Sinonasal Cavity (비강 및 부비동 Non-Hodgkin's Lymphoma의 방사선 치료)

  • Kim Soo Kon;Park Kyung Ran;Lee Chang Gul;Suh Chang Ok;Kim Gwi Eon;Loh John J.K.;Hong Won Pyo;Kim Byung Soo;Ryu Samuel
    • Radiation Oncology Journal
    • /
    • v.5 no.2
    • /
    • pp.97-104
    • /
    • 1987
  • From January 1970 through December 1984, 15 patients with sinonasal Non-Hodgkin's lymphoma combined to the head and neck were treated by external irradiation.13 patients were stage It and 2 were stage IIE by Ann Arbor Classification. However, when using TNM system, 7 were locally advanced T3, T4 lesions. All patients had follow up from 3.7 to 16 years with the median follow-up of 8.5 years. The overall actuarial 5-year survival rates were $25\%,\;28\%$ for IE and $0\%$ for IIE. Total tumor dose varied from 40 to 68 Gy. $100\%$ complete response with a total tumor dose of more than 55 Gy and $73\%$ complete response with less than 55Gy. When the disease was staged using the TNM (AJC) system, the five-year disease free survival for T1 and T2 patients was $50\%$ as compared with $14\%$ for T3 and T4. Failure rate by stage was $33\%(2/6)$ for T1 and T2, $86\%(6/7)$ for T3 and T4, and $100\%$(2/2) for IIE. The results suggest that 1. Higher CR could be obtained with a total tuner dose of more than 55 Gy. 2. Use of TNM staging system is as important as Ann arbor in management of sinonasal NHL. 3. The addition of combination chemotherapy should be considered for T3, T4 and IIE the sinonasal Non-Hodgkin's lymphoma although the disease is limited to head and neck.

  • PDF