• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.55-59
• /
• 2014

An implantable CPW fed monopole antenna embedded into human tissue is proposed for ISM band biomedical applications. The proposed antenna is made compatible for implantation by embedding it in an alumina ceramic substrate (${\Box}_r=9.8$ and thickness=0.65 mm). The proposed antenna covers the ISM band of 2.45 GHz. The radiation parameters, such as return loss, E-Plane, H-Plane, are measured and analyzed, using the method of moments. The proposed antenna has substantial merits over other implanted antennas, like low profile, miniaturization, lower return loss, and better impedance matching and high gain.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.463-469
• /
• 2016

In this paper, the use of a dual composite right/left-handed coplanar waveguide (CPW) transmission line is proposed for the design of a band rejection filter. The notch property of the filter is achieved by combining the convex signal line with the shorted concave meander line, and the equivalent circuit model is extracted from the geometry of the unit cell for organizing the band rejection property. Then the equivalent parameters of the unit cell are analyzed to identify those behaviors. And the dispersion characteristics and energy distributions are simulated. In the end, the band rejection filter is manufactured by cascading two proposed unit cells. We show that the measurement result for the resonant frequency demonstrates good agreement with the simulation result and the band rejection filter provides a rejection performance of 17.5 dB at the stopband frequency ranging from 869 MHz to 894 MHz.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.250-253
• /
• 2015

A novel implantable CPW fed Apollian shaped antenna embedded into human tissue is proposed for ISM band biomedical applications. The proposed antenna is made compatible for implantation by embedding it in an alumina ceramic substrate(ε_r=9.8 and thickness= 0.65 mm). The proposed antenna covers the ISM band of 2.45 GHz. The radiation parameters such as return loss, xy-plane, xz-plane, and yz-plane etc., are measured and analyzed using the agilent vector network analyzer. The proposed antenna has substantial advantages, including low profile, miniaturization ability, lower return loss, better impedance matching, and high gain over conventional implanted antennas.

• 한국광학회지
• /
• 제7권1호
• /
• pp.77-86
• /
• 1996

$Ti:LiNbO_3$ Mach-Zehnder 진행파형 광변조기의 CPW(coplanar waveguide) 전극구조, 특히 taper영역을 해석하기 위해서 SOR(successive over relaxation)법을 이용하였다. 변조기의 taper영역에서는 임피던스 정합, 즉 $Z_c 가 50\omega$이 만족되는 전극구조를 설계하였다. 변조기의 변조영역에서는 $Z_c=50\omega, n$$Z_c$ c/=50.OMEGA., n=2.26인 설계파라미터와, n$_{eff}$=2.2, Z$_{c}$=47.7.OMEGA.인 설계파라미터를 찾았다.

• Journal of electromagnetic engineering and science
• /
• 제6권3호
• /
• pp.160-164
• /
• 2006

This paper describes a compact printed helical resonator and its application to a microwave oscillator circuit implemented in coplanar waveguide(CPW) technology. The high Q-factor and spurious-free characteristic of the resonator contribute to the phase noise reduction and the harmonic suppression of the resulting oscillator circuit, respectively. The designed resonator resonating at the frequency of 5.5 GHz showed a loaded Q of 180 in a chip area of only 40 % of the corresponding miniaturized hairpin resonator without any spurious resonances. The fully planar oscillator incorporated with this resonator showed additional phase noise reduction of 10.5 dB at 1 MHz offset and a second harmonic suppression enhancement of 6 dB when compared to those of a conventional CPW oscillator without the planar helical resonator(PHR) structure.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.57-58
• /
• 2018

본 논문에서는 UHF RFID(902-928 MHz)와 GNSS(1,164-1,605 MHz)를 포함하는 광대역용 준-야기(quasi-Yagi) 안테나를 설계 방법에 대해 연구하였다. 제안된 안테나는 3소자(다이폴, 반사기, 도파기)로 구성되고, 코플래너 도파관(coplanar waveguide)으로 급전되며, 밸런을 내장하고 다이폴과 반사기의 끝부분을 접은 소형 안테나이다. 도파기를 다이폴에 근접한 영역에 두고 칩 커패시터를 안테나에 장하하여 광대역 임피던스 정합특성을 얻었다. 시뮬레이션을 통해 설계된 광대역 안테나를 0.8 mm 두께의 FR4 기판에 제작하고, 안테나 특성을 실험한 결과들이 시뮬레이션과 잘 일치함을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.401-404
• /
• 2002

This paper proposes a new symmetrical bandpass filter based on capacitive loading with a coplanar waveguide (CPW) structure. The filter was numerically designed at the operating frequency around 2 ㎓ by using IE3D software package. The characteristics of the proposed filter were then measured which the results were in good agreement with simulation. The passband insertion loss was considerably low (~3 ㏈) and the return loss was high (greater than 10 ㏈). The size of the proposed filter was also decreased approximately 50% when comparing with the fitters using conventional transmission lines.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.

• 대한전자공학회논문지SD
• /
• 제40권12호
• /
• pp.10-16
• /
• 2003

에어브리지의 기생 커패시턴스의 영향을 분석하기 위해 CPW PHEMT의 기존 cold-FET 회로모델에 게이트-에어브리지의 기생 커패시턴스(C/sub ag/)차 드레인-에어브리지의 기생 커패시턴스(C/sub ad/)를 더해주었다. 또한 제안된 모델을 사용하여 소자의 parameter들을 추출하여, 그 존재를 확인하였다. 본 논문에서는 에어브리지에 의해 생성되는 기생 커패시턴스의 영향을 연구하기 위해 에어브리지의 여러 연결방법을 CPW PHEMT 제작에 접목시켰다. 또한 핀치오프상태의 cold-FET에 대한 개선된 등가회로 모델을 제시하여 에어브리지에 의한 기생 커패시턴스가 소자 특성에 어떤 영향을 주는 가를 분석하였다. 제작된 CPW PHEMT의 측정 결과로부터, 기생 커패시턴스 C/sub ag/와 C/sub ad/가 소자의 S/sub 21/ 이득을 감소시키는 중요한 요소임을 확인하였다.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.110-117
• /
• 1998

An optical modulator with CPW(coplanar waveguide) electode on Ti:LiNbO$_{3}$ optical waveguide wasfabricated and characterized. The electrical-optical bandwidth measurement showed an optical response of -3dBat 10 GHzand S$_{11}$ lessthan -10dB upto 20GHz. The typeical specifications are : 5.6V of driving voltage, 4.2dB of insertion loss and 30dB of on/off extinction. The eye pattern proved that the optical meduator, fabricated in this work, has properties good enough for application.