• Title/Summary/Keyword: CPV-2a

검색결과 49건 처리시간 0.025초

비집광형 PV시스템 대비 집광형 PV시스템의 성능 개선 효과 분석 (Performance Improvement Justification of a Concentrating Photovoltaic(CPV) System over a non-concentrating PV system)

  • 아메드나비드;강은철;이의준
    • 한국태양에너지학회 논문집
    • /
    • 제25권4호
    • /
    • pp.141-153
    • /
    • 2005
  • PV 태양광 발전은 PV 재료가 고가이므로 일반 전력비용에 비해 상대적으로 비용이 높아진다. 저가형 광학 집광기술과 PV를 통합하게 되면, 비용뿐만 아니라 설치면적 등에서 유리하게 되나, 집광기의 단점이 함께 추가되게 된다. 집광기는 작은 수광각과 송신광선을 갖고 있어 PV 모듈에 필요한 태양광, 광학손실의 손실정도를 최소화하기 위한 신중한 시스템 디자인과 2축형 트레킹 장치가 필요하다. 고정식 비집광 시스템보다 더 많은 에너지를 얻기 위해서는 광학시스템의 손실율을 줄이고, 고효율의 PV 모듈을 이용한 PV셀의 상호연결이 필요하다. 본 논문에서는 우선, 비이미지 프레넬 렌즈 집광기를 사용한 PV 시스템에 대하여 간단하게 설명한 후, 출력전력값을 이론적으로 예측하고 PV 효율과 시스템 성능을 제시하였다. 프레넬 렌즈 선형 집광기 통합 PV 시스템과 비집광 PV 모듈의 출력전력값과 시스템 비용을 비교하면, PV 전력비용을 줄일 수 있는 집광기의 이용이 유용한 것을 알 수 있다. 따라서, 집광형 PV 시스템은 미래의 에너지 이용에 매우 유리한 시스템이라 할 수 있다.

Evaluation of a FPGA controlled distributed PV system under partial shading condition

  • Chao, Ru-Min;Ko, Shih-Hung;Chen, Po-Lung
    • Advances in Energy Research
    • /
    • 제1권2호
    • /
    • pp.97-106
    • /
    • 2013
  • This study designs and tests a photovoltaic system with distributed maximum power point tracking (DMPPT) methodology using a field programmable gate array (FPGA) controller. Each solar panel in the distributed PV system is equipped with a newly designed DC/DC converter and the panel's voltage output is regulated by a FPGA controller using PI control. Power from each solar panel on the system is optimized by another controller where the quadratic maximization MPPT algorithm is used to ensure the panel's output power is always maximized. Experiments are carried out at atmospheric insolation with partial shading conditions using 4 amorphous silicon thin film solar panels of 2 different grades fabricated by Chi-Mei Energy. It is found that distributed MPPT requires only 100ms to find the maximum power point of the system. Compared with the traditional centralized PV (CPV) system, the distributed PV (DPV) system harvests more than 4% of solar energy in atmospheric weather condition, and 22% in average under 19% partial shading of one solar panel in the system. Test results for a 1.84 kW rated system composed by 8 poly-Si PV panels using another DC/DC converter design also confirm that the proposed system can be easily implemented into a larger PV power system. Additionally, the use of NI sbRIO-9642 FPGA-based controller is capable of controlling over 16 sets of PV modules, and a number of controllers can cooperate via the network if needed.

Efficacy of Wood Ash as an Antiviral Agent against Cytoplasmic Polyhedrosis Virus of Tasar Silkworm, Antheraea mylitta D.

  • Singh, G.P.;Roy, D.K.;Sahay, Alok;Suryanarayana, N.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제13권2호
    • /
    • pp.97-101
    • /
    • 2006
  • The efficacy of wood ash from Terminalia arjuna (arjun) and T. tomentosa (asan) has been tested against virosis of tasar silkworm, Antheraea. mylitta D. The Polyhedral Occlusion Bodies (POBs) of Cytoplasmic Polyhedrosis Virus of A. mylitta (AmCPV) were exposed to the aqueous solution (0.5 to 4%) of wood ash for 5 to 30 minutes. The treated suspension of POBs was orally inoculated once to tasar silkworm larvae after 24 hours of $1^{st}$ moult, and larvae reared in indoor on arjun leaves till spinning. The application of aqueous solution of wood ash has established its potential as antiviral agent against cytoplasmic polyhedrosis virus. Two percent aqueous solution of wood ash from arjun and asan dissolved the Polyhedral Occlusion Bodies (POBs) of cytoplasmic polyhedrosis virus of tasar silkworm and inactivated the virions within a short period of 20 to 30 minutes. In vivo efficacy of aqueous solution of wood ash resulted in reduction of larval mortality due to virosis. The mortality was reduced to $2.56{\pm}0.21\;and\;3.03{\pm}0.32%$ when treatment of 2.0% solution of wood ash of arjun and asan respectively were applied for 20 minutes, compared to inoculated control $(92.18{\pm}7.52%)$. No mortality was recorded when treatment of 2.5% solution of wood ash of arjun and asan were applied for 10 minutes or more.

The Physicochemical Properties of Starch from Tongil-type Rice Varieties

  • Jong-Hee Shin;Chae-Min Han;Young-Un Song;Sang-Kuk Kim;Jung-Gi Ryu
    • 한국작물학회지
    • /
    • 제68권3호
    • /
    • pp.99-105
    • /
    • 2023
  • Starch characteristics and pasting properties of Tongil-type rice varieties with different amylose content were analyzed. Three different Tongil-type rice varieties and one Japonica-type rice variety were examined for their properties. Tongil-type rice varieties have longer panicles and higher rice yield (721-765 kg per 10a) than Boramchan, a Japonica-type high-yield rice variety. The protein content of the Tongil-type rice variety was higher than that of Boramchan. Japonica-type rice varieties had lower amylose content than Japonica-type rice varieties, except for Amimyeon (Milyang355). Amimyeon had higher protein content than the other varieties, and its amylose content was particularly high at 39.2%. The distribution of starch granule sizes of the four varieties was similar, and the particle size corresponding to D50 was approximately 87.8-81.9 ㎛. The pasting properties of rice flour varied among varieties. The Dasanbyeo and Hanarum2 amylogram patterns were similar. These two varieties had a higher peak viscosity (PV) and lower setback (SB) than Boramchan. In the case of Amimyeon, the hot paste viscosity (HPV), cool paste viscosity (CPV), and SB were significantly higher than those of the other Toingil-type varieties, and the breakdown (BD) was very low, showing pasting properties significantly different from that of the other varieties. The onset (To), peak (Tp), and conclusion temperature (Tc) of gelatinization of rice flour from Amimyeon were lower than those of the other tested varieties. In addition, the gelatinization temperature, measured using differnetial scanning calorimetry (DSC), and BD, measured using al rapid visco analyzer (RVA) were low in Amimyeon. Amylose content showed a high positive correlation with pasting time (PTi), HPV, and SB and a negative correlation with PV and BD.

개 코로나바이러스 불활화 백신에 대한 개와 기니픽 간의 면역반응 비교 (Comparison of immune responses of dogs and guinea pigs inoculated with inactivated canine coronavirus vaccines)

  • 안동준;김병한;정병열;이철현;전우진;이필수;정갑수
    • 대한수의학회지
    • /
    • 제45권2호
    • /
    • pp.215-221
    • /
    • 2005
  • Canine coronavirus (CCV) causes a mild gastroenteritis in dogs. The virus is highly contagious. Although the virus was isolated more than thirty years ago, canine coronavirus infection continues to be a widespread problem. Mixed infections with both CCV and canine parvovirus (CPV) are common. Four kinds of commercial killed CCV vaccines are available in Korea. All the commercial vaccines should pass the National Assay for Veterinary Biologicals prior to release. For the potency test of CCV vaccine, it is necessary to use CCV antibody free dogs. The test requires not only kennels but high cost. To develop easy, efficient and economic potency test method for killed CCV vaccine using laboratory animals, a series of experiments with rabbits and guinea pigs were carried out in this study. In the preliminary test, the guinea pigs showed better immune responses than rabbits. The guinea pig was also easy to manage. So guinea pig was selected for the potency test animals. When the guinea pigs were inoculated twice with one dose of vaccine intramuscuarly each, slower and a little lower SN antibody titers were induced in guinea pigs than in dogs (about 2 kg body weight Beagle strain) given the same posology as guinea pigs'. It was concluded that guinea pigs could be substituted for dogs in the potency test of killed CCV vaccine.

Virus의 경란전염이 차대의 잠작에 미치는 영향에 관한 연구 (Studies on the Generation-to-Generation Transmission of Cytoplasmic Polyhedrosis Virus and the Effect of Their Activation on the Induction in the Next Generation in the Silkworm, Bombyx mori L.)

  • 임종성;김근영
    • 한국잠사곤충학회지
    • /
    • 제16권1호
    • /
    • pp.85-92
    • /
    • 1974
  • 1. 활성 virus T-CPV에 대한 유발현상은 잠103 및 잠104어느 것이나 male$\times$ female 및 male$\times$female 처리가 높았으며, 접중농도에 있어서 male$\times$female 및 male$\times$female 처리의 H-CPV단독 유발현상은 $10^{7}$ /m1이하에서 높은 경향이었다. 2. Formalin첨식에 의한 유발현상은 잠103 및 잠104 어느 것이나 male$\times$female 및 male$\times$female가 높은 경향이 있다. 3. 냉장처리에 의한 유발현상에서도 formalin첨식의 경우와 같은 경향이 있다. 물론, 병장처리에 의하여 중장형다각체병이 유발되는 것은 전대에 접종된 occult virus가 활성화한다는 것이라 생각할 수 있으나 그 유발되는 정도는 역시 occult virus와 관계되는 유전적, 생리적 및 환경적 여러가지 요인들을 생각할 수 있다. 따라서 실제적인 저온에 의한 유발관계에서 사육환경을 지배하는 사육의 온습도, 생리적요인을 지배하는 엽질 등을 감안해야 할 것이다. 본 시험결과에서 보면 occult virus가 차대에 경란전달되어 사육중 유발요인에 따라서 활성화하는 것은 분명하다. 그러나 지금까지 occult virus를 찾아낼 수 있는 방법은 전자현미경 및 혈청학적인 기술에 의존해도 불가능하다. 따라서 잠종을 생산하는 과정에서 occult virus의 유무를 확인할 수 있는 방법은 active virus가 검출되는 나방(모아)을 대상으로 하는 경우로 제한하여 시험을 해야 할 것이다. 여기서 또한 밝혀져야 하는 것은 occult virus 경란전달과 sublethal infection에 의한 경란전달의 차이점인 것이다. 그리고 현재 우리가 보유하고 있는 품종별로 occult virus의 잠재된 상태를 유발요인별로 검토하므로서 저항성 품종육성에도 좋은 자료가 될 것으로 생각한다.

  • PDF

Effect of Growth Factors in Doping Concentration of MBE Grown GaAs for Tunnel Diode in Multijunction Solar Cell

  • 박광욱;강석진;권지혜;김준범;여찬일;이용탁
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.308-309
    • /
    • 2012
  • One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.

  • PDF

중집광형 태양광 집광장치 용 선형 프레넬 렌즈의 최적화설계연구 (Linear Fresnel Lens Optimization for Middle Concentrated Photovoltaic)

  • 송제헌;유진희;이준호;장원근;이동길
    • 한국광학회지
    • /
    • 제24권5호
    • /
    • pp.213-216
    • /
    • 2013
  • 본 논문에서는 25배 태양광 집광장치에 적용될 선형 프레넬 렌즈의 최적화에 대해 서술한다. 이 선형 프레넬 렌즈는 각기 다른 패턴을 가진 $10{\times}10$ mm 크기의 선형 프레넬 렌즈가 $5{\times}5$의 형태로 결합된 렌즈이다. 각 프레넬 렌즈는 같은 크기의 태양전지로 태양광이 입사할 수 있도록 최적화되어 있다. 최적화된 프레넬 렌즈의 설계치는 패턴높이 35 ${\mu}m$, 구배각 $4^{\circ}$, 모서리 라운드 1 ${\mu}m$로 각각의 선형 프레넬 렌즈에 모두 같은 값이 부여되었지만 사면경사각은 $14.1^{\circ}{\sim}31.2^{\circ}$로 각기 다르다. 이렇게 설계된 선형 프레넬 렌즈의 태양광 집광효율은 80%이상이며 기존의 25배 집광용 단일 프레넬 렌즈보다 오정렬 및 제작공차 측면에서 강력한 성능을 가진다. 설계된 선형 프레넬 렌즈의 민감도 분석을 통해 모서리 라운드가 1 ${\mu}m$씩 증가할수록 집광효율이 ~5%씩 저하되는 것을 파악하였고 이에 모서리 라운드가 최소한의 수치로 유지되어야 함을 확인하였다.

Lung Ventilation SPECT에서 LEAP Collimator의 유용성에 관한 연구 (The Study on Usefulness of LEAP Collimator in Lung Ventilation SPECT)

  • 김정수;김수미;김진의;이재성;이동수
    • 핵의학기술
    • /
    • 제16권2호
    • /
    • pp.18-24
    • /
    • 2012
  • Lung SPECT는 planar scan 보다 깊이 위치한 병변을 명확히 보여주며 보다 예민한 것으로 보고되고 있다. 그러나 ventilation SPECT는 정맥주사를 통해 방사성의약품을 주입하는 perfusion SPECT와 다르게 환자의 호흡을 통해 흡입시키므로, 원활한 호흡이 불가능한 환자의 경우 목적 장기에 방사성의약품의 섭취율이 저하되고 검사에 유효한 적정count/rate가 낮아지므로 필연적으로 검사시간이 길어지게 되어 이에 수반되는 여러 문제로 인하여 실제 임상에 적용하기 어려운 실정이다. 따라서 본 연구는 고감도(high sensitivity) 특성을 지닌 AP (All Purpose) 혹은 GP (General Purpose) collimator를 사용하여 low count/rate 환자의 검사시간을 단축시킴으로써 lung ventilation SPECT 임상적용 가능성과 유용성을 평가하였다. 정상 성인 남녀 4명($24.3{\pm}0.95$세)을 실험대상으로 Technegas 370 MBq을 흡입시키고, E.cam SPECT를 사용하여 count/rate를 측정한 후, LEUHR, LEHR, LEAP collimator를 장착하여 300counts acquisition 조건으로 ANT, POST, LPO, RPO, both-LAT 총 6 view의 lung ventilation planar scan 하였다. 동일 실험 대상자를 본원에서 사용하던 기존 프로토콜을 적용하여 70 kcounts/view acquisition 조건으로 high counting mode SPECT를 시행하고, 같은 방법으로 7kcounts/view acquisition하여 비교 실험인 low counting mode SPECT를 시행한 후 모든 실험의 결과를 lung segmentation ratio와 검사 소요시간을 통해 비교하여 분석하였다. 각 실험군 사이의 상관관계를 분석하기 위해 paired t-test를 시행하였고, p값이 0.05를 초과할 때 실험의 통계적 의미가 있는 것으로 판단하였다. 모든 자료의 통계처리는 SPSS ver. 20을 사용하였으며, 각 실험 결과는 산술 및 기하 평균(mean)을 구하고${\pm}$표준편차(SD)를 산출하였다. 실험 결과 lung planar scan은 300 kcounts/6 iew를 acquisition하여 총 1,800 kcounts를 획득하였다. 반면 7 kcounts/view로 acquisition한 low counting mode SPECT의 경우 collimator 종류에 따라서 최소 773 kcounts에서 최대 1,106 kcounts를 획득하였고, 70 kcounts/view로 acquisition한 high counting mode SPECT의 경우 collimator 종류에 따라서 최소 7,984 kcounts에서 최대 10,222kcounts를 획득하였다. 모든 실험 자료를 통해 실험대상 4명의 lung segmentation ratio를 산출하고, 평균값과 표준편차를 계산한 결과, LT:RT lung ratio는 순서대로 각각 45.5:54.5 (${\pm}0.26$), 45.4:54.6 (${\pm}0.40$), 50.1:49.9 (${\pm}0.28$), 49.4:50.6 (${\pm}0.57$)이었다. 따라서 정량분석한 결과 planar scan과 low, high counting mode SPECT사이 collimator 종류에 의한 lung segmentation ratio는 오차 범위내에 모두 존재하였다. 보다 자세한 분석을 위해 기존의 LEHR collimator를 장착한 planar scan과 비교 실험인 LEAP collimator를 장착한 low counts mode SPECT를 통계처리한 결과 p-value가 0.10이상으로 두 실험의 결과는 통계적으로 유의하였다. 실험에 소요된 시간을 분석한 결과 planar scan은 LEUHR, LEHR, LEAP collimator 순서로 각각 $1803{\pm}268$ sec, $915{\pm}162$ sec, $501{\pm}134$ sec이었고, 비교실험인 low counting mode SPECT는 $1125.5{\pm}103.6$ sec, $900{\pm}64$ sec, $740{\pm}0$ sec 이었으며, 본원에서 사용하던 기존 프로토콜인 high counting mode SPECT는 $5794.5{\pm}946.5$ sec, $3620{\pm}397.9$ sec, $2020{\pm}104.5$ sec이었다. 관심실험인 LEAP collimator를 장착한low counting mode SPECT의 검사 소요시간 740 sec에 비하여, 기존 본원의 프로토콜인 LEHR collimator를 장착한 high counting mode SPECT의 검사 소요시간 평균은 3620sec이므로, 약 5배 정도 시간 단축이 가능한 것으로 조사되었으며, 모든 실험의 정량분석 결과도 임상적으로 유의한 것으로 분석되었다. 결국 high sensitivity LEAP collimator를 장착하여 lung SPECT를 시행하면, 임상적으로 유의한 정량분석 결과를 얻을 수 있으며, 동시에 검사시간을 효과적으로 단축시킬 수 있음을 의미한다.

  • PDF