• Korean Journal of Veterinary Service
• /
• v.13 no.2
• /
• pp.162-183
• /
• 1990

From 1988 to 1989, 8 strains of canine parvovirus-2 (CPV-2) were isolated from the fecal specimens from the dogs that were clinically diagnosed as canine parvoviral enteritis in the veterinary hospitals located in the regions of Taejon and Chungbuk province. Studios on biological and physicochemical properties for the isolates were carried out. The results obtained by experiments are summarized as follows. 1. Among 62 fecal samples collected from the dogs with enteric diseases, 24 (38.7%) showed the haemagglutinating activity against porcine erythrocyte, ranging from 16 to 16, 384 of HA titers. 2. When 8 fecal specimens with high HA titer over 1, 000 were inocultated into CRFX cells, intranuclear inclusion bodies were obseverd in all of eight specimens, of w)lick three specimens showed cytoplasmic inclusions concurrently with the intranuclear inclusion bodies. 3. In study on species-specificity of haemagglutinating activity of the isolates, TJ-89-1 and TJ-89-2, it was found that the isolates revealed the highest haemagglutinating activity with porcine erythrocytes, showing the relatively lower haemagglutination titers with the erythrocytes from cat and rabbit. None of erythrocytes from other animals reacted with the isolates. 4. By the cross-haemagglutination inhibition test of the Isolates with reference viruses and sera, the Isolates were evidently identified as the strains of canine parvovirus-2. 5. In Physicochemical property test, it was evident that the isolates were stable in, lipid solvent, pH and heat treatment at $56^{\circ}C$ for 30 min. and contain DNA genome. 6. When seven puppies were inoculated intraorally with the isolate at HA titer of 8, 192, all of the puppies showed the symptoms of anorexia, vomiting, diarrhea and died at the 5th to 10th days post inoculation(pi). The fecal samples from all of the puppies revealed significantly high HA titers afterward the 5th days pi. Body temperature and the number of total leucocytes were slightly increased at the early stage of infection. but extremely decreased at the stage of collapse. HI titers of the sera started to increase at the 2nd to 3rd days pi reaching 512 to 1, 024 at the 4th to 5th day pi.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.215-221
• /
• 2005

Canine coronavirus (CCV) causes a mild gastroenteritis in dogs. The virus is highly contagious. Although the virus was isolated more than thirty years ago, canine coronavirus infection continues to be a widespread problem. Mixed infections with both CCV and canine parvovirus (CPV) are common. Four kinds of commercial killed CCV vaccines are available in Korea. All the commercial vaccines should pass the National Assay for Veterinary Biologicals prior to release. For the potency test of CCV vaccine, it is necessary to use CCV antibody free dogs. The test requires not only kennels but high cost. To develop easy, efficient and economic potency test method for killed CCV vaccine using laboratory animals, a series of experiments with rabbits and guinea pigs were carried out in this study. In the preliminary test, the guinea pigs showed better immune responses than rabbits. The guinea pig was also easy to manage. So guinea pig was selected for the potency test animals. When the guinea pigs were inoculated twice with one dose of vaccine intramuscuarly each, slower and a little lower SN antibody titers were induced in guinea pigs than in dogs (about 2 kg body weight Beagle strain) given the same posology as guinea pigs'. It was concluded that guinea pigs could be substituted for dogs in the potency test of killed CCV vaccine.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.97-106
• /
• 2013

This study designs and tests a photovoltaic system with distributed maximum power point tracking (DMPPT) methodology using a field programmable gate array (FPGA) controller. Each solar panel in the distributed PV system is equipped with a newly designed DC/DC converter and the panel's voltage output is regulated by a FPGA controller using PI control. Power from each solar panel on the system is optimized by another controller where the quadratic maximization MPPT algorithm is used to ensure the panel's output power is always maximized. Experiments are carried out at atmospheric insolation with partial shading conditions using 4 amorphous silicon thin film solar panels of 2 different grades fabricated by Chi-Mei Energy. It is found that distributed MPPT requires only 100ms to find the maximum power point of the system. Compared with the traditional centralized PV (CPV) system, the distributed PV (DPV) system harvests more than 4% of solar energy in atmospheric weather condition, and 22% in average under 19% partial shading of one solar panel in the system. Test results for a 1.84 kW rated system composed by 8 poly-Si PV panels using another DC/DC converter design also confirm that the proposed system can be easily implemented into a larger PV power system. Additionally, the use of NI sbRIO-9642 FPGA-based controller is capable of controlling over 16 sets of PV modules, and a number of controllers can cooperate via the network if needed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.99-105
• /
• 2023

Starch characteristics and pasting properties of Tongil-type rice varieties with different amylose content were analyzed. Three different Tongil-type rice varieties and one Japonica-type rice variety were examined for their properties. Tongil-type rice varieties have longer panicles and higher rice yield (721-765 kg per 10a) than Boramchan, a Japonica-type high-yield rice variety. The protein content of the Tongil-type rice variety was higher than that of Boramchan. Japonica-type rice varieties had lower amylose content than Japonica-type rice varieties, except for Amimyeon (Milyang355). Amimyeon had higher protein content than the other varieties, and its amylose content was particularly high at 39.2%. The distribution of starch granule sizes of the four varieties was similar, and the particle size corresponding to D50 was approximately 87.8-81.9 ㎛. The pasting properties of rice flour varied among varieties. The Dasanbyeo and Hanarum2 amylogram patterns were similar. These two varieties had a higher peak viscosity (PV) and lower setback (SB) than Boramchan. In the case of Amimyeon, the hot paste viscosity (HPV), cool paste viscosity (CPV), and SB were significantly higher than those of the other Toingil-type varieties, and the breakdown (BD) was very low, showing pasting properties significantly different from that of the other varieties. The onset (T_o), peak (T_p), and conclusion temperature (Tc) of gelatinization of rice flour from Amimyeon were lower than those of the other tested varieties. In addition, the gelatinization temperature, measured using differnetial scanning calorimetry (DSC), and BD, measured using al rapid visco analyzer (RVA) were low in Amimyeon. Amylose content showed a high positive correlation with pasting time (PTi), HPV, and SB and a negative correlation with PV and BD.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.85-92
• /
• 1974

Many of studies on the transovarial transmission of occult virus and their activation due to various stresses such as cold or heat treatment, chemical feeding, and nutritional deficiency, etc., in the silkworm, Bombyx mori L. have been made, but any attempts have been not made to control virus diseases by detection of the occult virus-carried moths in the production of silkworm egg of hybrids, because of difficulty to detect occult virus in any stage. Therefore, it may be worth while to disclose whether a sublethal infection of the moths from which active virus are detectable, has the same level of induction rate as that of occult virus activation, thus to apply its results for the reduction of the occurence of virus diseases in silkworm rearing. For these purposes, the following experiment was conducted as one of preliminary steps. In this study, investigations on the generation-to-generation transmission of occult virus and a sublethal infection, and the role of chromosomal gene of the host, Jam 103 and Jam 104 in the Previous generation, and Jam 103 x Jam 103 and Jam 104 f Jam 104 in the next generation were made for the induction of virus diseases due to the transmitted virus. The frequency of cytoplasmic polyhedrosis due to the induction in the F$_1$ generation was markedly higher in the cross-batches, male$\times$female and male$\times$female in which inoculated individuals were used as fem ale parents than in the cross-batches, male$\times$female and male$\times$female in which virus has been not inoculated or inoculated only to male in the previous generation. The tendency of increasing rate was observed in any treatments; such as the inoculations of cytoplasmic polyhedrosis virus (10$\^$5/, 10$\^$6/ 10$\^$7, and 10$\^$8//ml ill different concentration of inocula) , cold-treatment (5$^{\circ}C$, 12hrs or 24hrs), and formalin-feeding treatment (2％ or 3％). The shape of polyhedra (tetragonal in outline) examined in the F, larvae was identified as that of the inoculated polyhedra with partial application of immunofluorescent techniques. These results suggests that the cytoplasmic polyhedrosis virus in B. meri L. are transmitted to the next generation through the egg, apparently in the occult state. And the experimental results of various cross-batches revealed the egg cytoplasm plays an important part i the transmission of the occult virus of the cytoplasmic polyhedrosis virus,

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.308-309
• /
• 2012

One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.

• Journal of Food Hygiene and Safety
• /
• v.18 no.4
• /
• pp.183-188
• /
• 2003

Bactericidal effect of $Green-Zone^{(TM)}$ was observed, when Staphylococcus aureus, E. coli O157:H7, Salmonella typhimurium, S. enteritidis, Listeria monocytogenes, the causative bacteria of food poisoning, Vibrio parahaemolyticus, and Shigella sonnei were treated with the diluted solution of $Green-Zone^{(TM)}$(33.3%~4.1%) for 30min at $20^{\circ}C$. All the bacteria were killed in 30 sec, when 33.3%-diluted $Green-Zone^{(TM)}$ was applied, except for S. aureus. Coronavirus, the same virus with SARS virus taxonomically, was also lilled with the 20%-diluted $Green-Zone^{(TM)}$. Canine parvovirus and Canine distermper virus were also killed even in the organic matter and hard water when treated with $Green-Zone^{(TM)}$. When applied to food such as raw fish, chilled meat, vegetables, $Green-Zone^{(TM)}$ could also decrease the number of microorganism, expecially for E. Coli. From these results, $Green-Zone^{(TM)}$ is thought to be effective for killing virus and bacteria, and also was proved to be safe when applied directrly to food.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.213-216
• /
• 2013

This paper presents a combination of linear Fresnel lenses optimized for ${\times}25$ solar concentration. The combined lens consists of $5{\times}5$ linear Fresnel lenses. Each Fresnel lens is of $10{\times}10$ mm and optimized to tilt the incoming light onto a solar cell of the same size. All of the optimized Fresnel segments have the same pattern height of 35 ${\mu}m$, draft angle of $4^{\circ}$, and edge groove round of 1 ${\mu}m$ but with different facet angles varying from $14.1^{\circ}$ to $31.2^{\circ}$. The solar concentrating efficiency of the combination is shown to be over 80% and more robust than a conventional single ${\times}25$ circular Fresnel lens in terms of pointing misalignment and manufacturing errors. A sensitivity analysis finds that the edge groove round should be kept as small as machining allows since the concentrating efficiency drops ~5% per 1 ${\mu}m$ increase of the edge groove.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1327-1335
• /
• 2017

This study was carried out to determine the effect of cacao bean addition on the physicochemical properties of extruded rice flour. Rice-based cacao beans (0, 20, 40, 60%) were extruded at a die temperature of $130^{\circ}C$, screw speed of 200 rpm, and moisture content of 25%. As the content of cacao beans increased from 20% to 60%, expansion index decreased, while piece density and specific length increased. The water soluble index and water absorption index of the extrudate increased through extrusion cooking. Lightness decreased as cacao bean content increased while redness increased. As the content of cacao beans increased, paste viscosity decreased. Cold peak viscosity was observed in all extrudates of raw roasted cacao beans. ${\alpha},{\alpha}$-Diphenyl-${\beta}$-picrylhydrazyl (DPPH) radical-scavenging activity increased upon extrusion and cacao bean addition. As content of cacao beans increased, non-roasted cacao beans had higher total phenolic contents than roasted cacao beans. This study showed that addition of cacao beans to extruded rice snack improved antioxidant activity.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.18-24
• /
• 2012

Purpose : Although lung ventilation SPECT (LV-SPECT) has a good sensitivity in detection of deep lung lesions, it is difficult to apply the LV-SPECT to patients having breathing problems due to limited examination time. In this study, we evaluated the usefulness of LEAP collimator, which provides high detection sensitivity and tolerable resolution, for the LV-SPECT in terms of diagnostic accuracy and examination time. Materials and Methods : Four volunteers inhaled Technegas (370 MBq) and the lung ventilation planar scan (LVPS, 300 counts/view (cpv)) with LEHR collimator was performed using Siemens E.cam scanner as a reference test. LV-SPECT scans were performed with three collimators, LEHR, LEUHR, and LEAP, in low (7 kcpv) and high (70 kcpv) counting modes. The count ratios of left (LT) and right (RT) lung segments were calculated on the geometric mean view of anterior and posterior images for LVPS and on the summed coronal images of LV-SPECT, respectively. Comparing to LVPS, the usefulness of three different collimators for LV-SPECT was evaluated through statistical analysis (paired t-test), on count ratios of lung segments. Results : The average LT:RT ratio in LVPS was 47:53. For LV-SPECT, there were negligible difference of the LT:RT ratios (48:52 on average) among three different collimators in low and high counting modes. Comparing to standard LVPS with LEHR, all LV-SPECTs with different collimators resulted in similar diagnostic accuracy through paired t-test (p>0.05). The scan time in LVPS (6 views) was 17.3 min. For LV-SPECT (128 views) in low counting mode, it took 18.7 (LEUHR), 15.0 (LEHR), and 12.3 min (LEAP), respectively. Conclusion : Comparing to standard LVPS, the LV-SPECT with LEAP in low counting mode provided the comparable diagnostic accuracy in addition to shortened scan time.