• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.536-542
• /
• 2020

This paper presents a nature-inspired wideband sprout-leaf shaped antenna with end-fire radiation pattern. A sprout-leaf shape angled-radiator was designed for wide beamwidth radiation patterns for motion detection sensors. An extended and truncated ground plane was used as a reflector for end-fire radiation patterns. To feed the balanced radiator, a broadband microstrip (MS) to coplanar stripline (CPS) balun was utilized with excellent amplitude and phase balance. The proposed antenna demonstrates wide frequency bandwidth from 8.5 to 14.5 GHz with wide beamwidth and the radiation efficiency of 90%. The measured gain is from 4 to 5 dBi and front-to-back ratio was 10 to 20 dB. It has been shown that the proposed antenna can be used for imaging sensors, phased array systems, and radars that require a wide bandwidth and a directional radiation pattern.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.386-391
• /
• 2006

In this paper, a design of V-type Linearly Tapered Slot Antenna(V-LTSA) with uniplanar microstrip-to-coplanar stripline(CPS) transitions is presented. The effect of reducing and increasing with taper width G, teper length L and opening angle are also considered at 5.8 GHz. In the result of a simulation by using CST-MWS, the return loss characteristic came very wide band about 4.3GHz, or 1.8 Octave. Proposed V-LTSA design schemes are expected to be a good antenna for microwave and millimeter-wave communcations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.913-919
• /
• 2008

A new design and its experimental results of a microstrip-fed ultra-wideband tapered slot antenna(TSA) for millimeter-wave systems are presented. By utilizing the ultra-wideband microstrip-to-CPS transition(balun), ultra-wideband characteristics of the inherent TSA are retrieved. Also, the design procedure of the TSA is simplified by performing simple impedance matching between balun and antenna. The proposed TSA is shaped by using the Fermi-Dirac tapering function and corrugated at the outer edge. The implemented antenna demonstrates ultra-wideband performance for frequency ranges from 23 to over 58 GHz with the relatively high and flat antenna gain of 12 to 14 dBi and low sidelobe levels. In addition, a 4-element linear antenna array for phased-array systems and mm-wave sensor applications is also presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.805-810
• /
• 2014

In this paper, the characteristics of a series-fed dipole pair antenna with an end-aligned strip pair director are studied. In the proposed SDP antenna, two strip dipole antennas with different lengths and a ground reflector are connected trough a coplanar stripline. The strip pair director placed above the second dipole element are two rectangular-shaped strips and is aligned at the ends of the two arms of the second dipole. The variations on the antenna performance for different lengths and widths of the director are analyzed, and optimal design parameters for the enhancement of the bandwidth are obtained. The optimized SDP antenna is fabricated on an FR4 substrate, and the experimental results show that the antenna has a frequency band of 1.65-2.95 GHz for a VSWR < 2, which shows enhanced bandwidth compared to the conventional SDP antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.483-489
• /
• 2006

In this paper, new wideband lens amplifiers are proposed for C-band wireless communication service. In order to obtain the wideband property, all components of the proposed lens amplifiers are designed with balanced structure and wideband characteristics. Fat dipole antenna as the input and output antenna, balanced amplifier as amplifying components, and coplanar stripline(CPS) as the delay line fer the beam focusing are used fur composing the stable wideband lens amplifier. The $5{\times}5$ 2D lens amplifier has the characteristics that the absolute gain is 7.5 dB, the EIPG is 37.4 dB at 6 GHz, and the 3-dB gain bandwidth is 19.8 %.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.714-720
• /
• 2009

In this paper, design and the implementation method of a band-tunable ultra-wideband planar doubler are described Microstrip-to-CPS(balun) transition and Microstrip-to-CPW transition are respectively used for input/output matching circuits for the doubler. The Input balun structure allows to apply diode bias, and the doubler output frequency is tunable by changing the diode bias voltage. With the bias voltage of -0.6 V, the measured operating frequency band of the implemented doubler is $10{\sim}20$ GHz, with the bias voltage of $-0.2{\sim}-0.4$ V, the operating frequency band is $10{\sim}30$ GHz, and with 0 V bias, the operating frequency band is $20{\sim}30$ GHz. The doubler provides conversion loss of less than 15 dB and fundamental frequency suppression of 30 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.207-213
• /
• 2008

A simplified design procedure for quasi-Yagi antenna arrays using an ultra-wideband balun is presented. The proposed antenna design procedure is based on the simple impedance matching among antenna components: i.e., balun, feed, and antenna This new broadband and high gain antenna array is possible due to the ultra-wideband performance of the balun. As design examples, wideband $1\times4$ and $1\times8$ quasi-Yagi antenna arrays are successfully designed and implemented in Ku-band with frequency bandwidths of about 50 % and antenna gains of 9$\sim$10 dBi and 11$\sim$12 dBi, respectively. And the simulated and measured results demonstrate wide bandwidths and good radiation properties. These antenna arrays can be applied to various phased-array and spatial power combining systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.814-819
• /
• 2008

In this paper, a design of broadband detectors utilizing two ultra-wideband transitions is described for the first time, and the implementation method and measurement results of the detectors are provided. Two ultra-wideband transitions are used for input/output matching circuits for the diode detectors. Two detectors have been implemented using general Schottky diodes and zero-bias Schottky diodes. With general Schottky diodes, the fabricated detector provides less than 10 dB return loss from 11 GHz to 20 GHz, and the detector sensitivity is 30 mV/mW. The detector with zero-bias Schottky diodes shows significantly higher detection sensitivity(300 mV/mW).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5214-5218
• /
• 2011

In this paper, bandwidth improvement of a series-fed two dipole array(STDA) antenna applicable for mobile communication base station antennas is studied. The proposed STDA antenna consists of two strip dipole antennas with different lengths which are connected directly trough a coplanar stripline(CPS). By adjusting the spacing between the two dipoles and the length of the second dipole, the bandwidth of the STDA can be enhanced. In addition, an integrated balun composed of a short-circuited microstrip line and a slot line is utilized to minimize the area required for a feeding part, and a broadband impedance matching is obtained by adjusting the feeding point. Based on the proposed antenna structure, an STDA antenna covering the frequency band ranging from 1.75 GHz to 2.7 GHz, which includes almost all the existing mobile communication frequency bands, with more than 5 dBi gain is designed and fabricated on an FR4 substrate with dielectric constant of 4.4 and thickness of 1.6mm, and experimentally tested. The fabricated antenna shows impedance bandwidth of 49%(1.7-2.8 GHz) for VSWR<2, a gain higher than 5.5 dBi, and a front-back ratio better than 12 dB.