• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.313-322
• /
• 1995

This study was conducted to find the design factors of spraying device of the boom sprayer for low volume application. Specific objectives of this study were 1) to select proper nozzles for broadcast spraying and row crop spraying by the nozzle spray characterisic experiment, and 2) to investigate the coverage characteristic of rice plant at the row crop spraying. The results of this study are summarized as follows. (1) From the tested results on the droplet diameter spectrum and spray pattern the standard flat-fan nozzle and drift guard nozzle were judged as appropriate for the broadcasting. Even flat-fan nozzle showed similar span values to standard flat-fan nozzles and drift guard nozzle : however, the nozzles were found to be inappropriate for broadcasting because of their spray pattern. Hollow cone nozzle showed relatively small span values and uniform spray pattern. (2) For the upper and lower sides of the rice plants, coverage rates of even flat-fan nozzles and hollow cone nozzles were maximum at the second row, but decreased rapidly after the third row. For the middle side of the rice plants, coverage rates of them were maximum at the first row, but decreased rapidly. When one nozzle was tested, C.V. values were in the range of 90~160% and 60~160% on entire heights of rice plant for even flat-fan nozzles and hollow cone nozzles respectively. C.V. values at other parts were poor. Spray coverage rate at the middle part was improved by overlapping the nozzles whereas there was little difference on the upper and lower part of rice plants. (3) For spraying lower part of rice plant between rows, even flat-fan nozzles and hollow cone nozzle were judged as appropriate, but in order to ensure the uniform coverage, distance between nozzles, recommended to be less than 90cm.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.388-395
• /
• 2013

PURPOSE. The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS AND METHODS. This study included 20 male subjects to perform the isokinetic muscle tests and the Wingate anaerobic power test on both knee joints under five closed-mouth conditions: without or with 4 types of mouthguards with thickness of 2 mm based on premolar area: (1) full-coverage, (2) anterior partial-coverage, (3) right posterior partial-coverage, and (4) left posterior partial-coverage. The obtained results were subjected to One-way ANOVA with repeated measures, followed by post hoc test of the contrast method (${\alpha}$=.05). RESULTS. There was no significant difference between the closed position with and without a full-coverage mouthguard in all variables. However, significant differences were observed between with and without a partial-coverage mouthguard in muscular endurance during extension of the left knee, muscular power and endurance during flexion of the right knee. Additionally, significant differences were found between occlusal states with full- and partial-coverage mouthguards in muscular power and endurance during extension of the left knee. CONCLUSION. These findings indicate the elevation of vertical dimension by 2 mm or the inducement of occlusal stability had little effect on isokinetic muscle strength and anaerobic performance, while uneven distribution of occlusal force might have some positive effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.414-420
• /
• 2009

In this paper, we investigate throughput performance of OFDMA-based relay systems according to the "sub-cell coverage configuration" of the base station (RS) and the relay station (RS). RS is exploited for improved quality of the received signal with a tradeoff of additional radio resource consumption which may result in degradation of the throughput performance of the system. Therefore, "radio resource reuse" may be necessary for high performance in relay systems. However, it also causes system performance degradation since resource reuse between RSs incurs channel interference. Therefore, effective resource reuse also should be considered for "high throughput coverage configuration" when relays are employed. We relate the resource reuse patterns of neighboring RSs to sub-cell coverage configuration. We determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the mobile station (MS) from the BS and RS, respectively. Simulations illustrate the throughput performance as the function of SINR ratio, and it has different optimal point depending on the resource reuse patterns. Therefore, the "resource reuse pattern" and the "effective sub-cell coverage configuration" should be considered together for the high throughput performance of the relay system.

• Survey Research
• /
• v.10 no.1
• /
• pp.33-56
• /
• 2009

Landline telephone surveys of the population of households or individuals in Korea often use telephone directories as sampling frames. Recently, the frequency of unlisted numbers in the directories has been increased and the number of households without landline phones has become larger with a spread of mobile phones. Landline telephone coverage has currently reached to a level that raises concerns about the currently due to a coverage bias on the statistics in question. In this paper, we first present the distribution of telephone ownership in Korea and make a comparison with some selected countries. Second, we describe the characteristics of telephone directories. Next, we directly or indirectly estimate the telephone coverage rates of the frames, and show that it may nationally be lower than 65.6% based on additional information. We conclude with remarks about future studies to reduce coverage bias, including the developments of efficient random digit dialing sampling methods.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.6
• /
• pp.1099-1105
• /
• 2015

Objectives: The purpose of this study was to investigate parents' recognition and attitudes toward national health insurance coverage of sealant by the dental hygienists. Methods: A self-reported questionnaire was filled out by 329 elementary school children parents in G metropolitan city and N city from July 11 to 27, 2015. The questionnaire consisted of general characteristics of the subjects, recognition and attitudes toward national health insurance coverage of sealant and sealant by the dental hygienist, and recognition toward national health insurance. The data were analyzed by a descriptive analyses, multiple regression and logistic regression analysis using SPSS 12.0 program. Results: Recognition of national health insurance coverage was 2.52 times higher in high school and 4.97 times higher in recognition toward purpose of sealant. Factor affecting recognition of national health insurance was subscription of private health insurance, recognition of sealant treatment by dental hygienist (DH) and recognition of national health insurance coverage of sealant. Attitude toward sealant treatment by DH was positive in experience of sealant, recognition of sealant treatment by DH and experience of sealant treatment by DH. Factor affecting satisfaction on the sealant by DH was recognition of sealant treatment by DH and recognition of purpose of sealant. Conclusions: To increase national health insurance coverage of sealant, it is necessary to expand positive public relations of sealant by the dental hygienist.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.453-461
• /
• 2010

A critical issue in wireless sensor networks is an energy-efficiency since the sensor batteries have limited energy power and, in most cases, are not rechargeable. The most practical manner relate to this issue is to use a node wake-up scheduling protocol that some sensor nodes stay active to provide sensing service, while the others are inactive for conserving their energy. Especially, CTC (Connected Target Coverage) problem has been considered as a representative energy-efficiency problem considering connectivity as well as target coverage. In this paper, we propose a new energy consumption model considering multiple-targets and create a new problem, CMTC (Connected Multiple-Target Coverage) problem, of which objective is to maximize the network lifetime based on the energy consumption model. Also, we present SPT (Shortest Path based on Targets)-Greedy algorithm to solve the problem. Our simulation results show that SPT-Greedy algorithm performs much better than previous algorithm in terms of the network lifetime.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.125-136
• /
• 2018

The purpose of the study is to investigate dental health insurance coverage the awareness and dental health insurance coverage extension to scaling in service consumers. There were significant differences according to education level, age on the appropriateness of the age of yearly scaling benefit, and to married, regions, self-oral health of the frequency of yearly scaling benefit, who their teeth brushed frequence a day on the appropriateness of the fee of yearly scaling benefit. It implies that should be added to the coverage list national health insurance every age group after increasing periodontal disease. It is to be more extension as to age, frequency and fee health insurance coverage of scaling, the effort to improve dental health insurance coverage policy must be continue for oral health in the future.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.3
• /
• pp.443-454
• /
• 2020

The JavaScript engine is a module that receives JavaScript code as input and processes it, among many functions that are loaded into web browsers and display web pages. Many fuzzing test studies have been conducted as vulnerabilities in JavaScript engines could threaten the system security of end-users running JavaScript through browsers. Some of them have increased fuzzing efficiency by guiding test coverage in JavaScript engines, but no coverage guided fuzzing of optimized, dynamically generated machine code was attempted. Optimized JavaScript codes are difficult to perform sufficient iterative testing through fuzzing due to the function of runtime guards to free the code in the event of exceptional control flow. To solve these problems, this paper proposes a method of performing fuzzing tests on optimized machine code by avoiding deoptimization. In addition, we propose a method to measure the coverage of runtime-guards by the dynamic binary instrumentation and to guide increment of runtime-guard coverage. In our experiment, our method has outperformed the existing method at two measures: runtime coverage and iteration by time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2311-2318
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times, and estimation of the reliability and availability of a software product require Release times of a critical element of the software testing process : test coverage. This model called Enhanced non-homogeneous Poission process(ENHPP). In this paper, exponential coverage and S-shaped model was reviewed, proposes the Kappa coverage model, which make out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics and Kolmogorov distance, for the sake of efficient model, was employed. Numerical examples using real data set for the sake of proposing Kappa coverage model was employed. This analysis of failure data compared with the Kappaa coverage model and the existing model(using arithmetic and Laplace trend tests, bias tests) is presented.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.8
• /
• pp.331-342
• /
• 2019

This paper proposes a method to generate test cases and test scripts from software requirements written in a controlled natural language, which helps develop reliable embedded software. In the proposed method, natural language requirements are written in a controlled language, the requirements are parsed and then inputs, outputs and operator data are extracted from the requirements. Test cases are generated from the extracted data following test case generation strategies such as decision coverage, condition coverage or modified condition/decision coverage. And then the test scripts, physical inputs of the test cases are generated with help of the test command dictionary. With the proposed method, it becomes possible to directly check whether software properly satisfies the requirements. Effectiveness of the proposed method is verified empirically with an requirement set.