• 한국방사선학회논문지
• /
• 제7권4호
• /
• pp.285-291
• /
• 2013

전림프계의 방사선치료시 선형가속기와 토모테라피를 이용하여 치료계획 수립 시 유용성을 확인하였다. 실험에 동의한 실험대상자 15명(남: 7명, 여: 8명)의 모의치료영상을 Somatom Sansation Open 16 channel으로 획득하여 이를 각각 의료용 선형가속기 치료계획 장치와 토모테라피 치료계획 장치로 전송하고 종양체적과 정상조직(전체 폐, 척수, 우측신장, 좌측신장)을 구분하여 종양조직에 750 cGy를 설정하여 종양조직의 선량 적합성, 정상조직의 선량흡수정도, 선량분포양상 그리고 선량체적곡선을 비교하여 평가하였으며 SPSS Ver. 18.0을 이용하여 대응표본검정을 실시하였다. 종양의 흡수선량 측정결과 토모테라피의 경우 $751.0{\pm}4.7cGy$, 선형가속기는 $746.9{\pm}14.1cGy$의 선량을 보였으며 이는 통계적으로 유의하지 않았다(p>0.05). 정상조직의 경우 전체 폐, 척수, 우측신장, 좌측신장에 입사되는 평균 방사선량은 토모테라피가 선형가속기보다 다소 낮은 방사선 흡수량을 보였다. 선량체적곡선에서 종양조직 및 정상조직 모두 적합한 양상을 보였다. 즉, 종양 및 정상조직의 선량흡수정도, 선량분포양상, 선량체적 곡선을 살펴본 결과 모두 적합한 치료효과비를 보인 것으로 판단되며 토모테라피 치료가 다소 높은 치료효율을 보였다. 토모테라피를 이용한 치료는 폐쇄형 치료공간과 긴 치료시간의 단점이 있기 때문에 오랜시간 자세재현이 불가능한 환자의 경우, 제한적으로 선형가속기 치료를 실시하여도 무방할 것으로 판단된다.

• Journal of Preventive Medicine and Public Health
• /
• 제29권4호
• /
• pp.721-732
• /
• 1996

생활수준과 교육수준이 매우 낮은 저개발국가에서의 임신분만 환경을 알아보고 건강관련 행위 실천(산전진찰, 시설분만, 제대기구소독)과 지식과 태도와의 관계를 알아보기 위하여 네팔 돌카 마을에서 지난 1년간(1994년 4월 13일$\sim$1995년 4월 12일)출산한 경험이 있는 산모를 대상으로 일반적 특성, 임신과 분만에 관련된 지식, 태도, 산전진찰률, 분만환경 등을 조사하였다. 이 지역의 임신과 분만에 관련된 지식수준은 낮은 편으로 대상자의 87.5%가 보건교육을 받은 경험이 없었다. 대상자의 29.6%는 임신시 흡연이 태아에 해가 없다고 하였으며, 42.8%는 임신시 음주와 약의 복용이 태아에 해가 없다고 답하였고, 17.1%가 제대절단시 소독하지 않은 기구를 사용해도 유해하지 않다고 응답하였는데, 교육을 받은 적이 없는 경우, 보건교육을 받은 경험이 없는 경우, 그리고 보건기관까지의 거리가 멀 수록 올바르지 못한 지식을 가지고 있었다. 응답자의 56.6%가 산전진찰이 필요없다는 태도를 보였고, 42.8%가 질출혈시 병원을 방문할 필요가 없다는 태도를 보였는데, 교육을 받은 적이 없는 경우, 보건 교육을 받은 경험이 없는 경우, 그리고 보건기관까지의 거리가 멀수록 바람직하지 못한 태도를 가지고 있었다. 또한 82.9%가 분만과정 자체가 불결한 것이라고 여기고 있었다. 한번이라도 산전진찰을 받은 경험이 있는 산전진찰 경험률은 28.3%였는데 교육을 받은 적이 없는 경우, 보건교육을 받은 경험이 없는 경우에 산전진찰 미경험률이 높았다. 시설분만율은 5.3%로 매우 저조하였고, 시설 외 분만인 경우 82.6%가 제대절단기구를 소독하지 않고 사용하고 있었는데 교육을 받은 적이 없는 경우, 보건교육을 받은 경험이 없는 경우, 그리고 보건기관까지의 거리가 멀수록 소독을 하지 않고 사용하고 있었다. 지식과 태도와의 관계에 있어서는 지식이 많은 군이 산전진찰의 필요성을 더 느끼며 질출혈시 병원방문의 필요성을 더 느끼고 있어, 임신과 분만에 관련하여 더 바람직한 태도를 가지고 있었다. 태도와 실천과의 관계에 있어서는 바람직한 태도를 가진 산모군이 산전진찰 경험률이 높았으며, 시설분만이 많아 실천율이 높았다. 다변량 분석에서도 지식이 태도에 양(陽)의 영향을 미치는 변수였으며, 태도는 실천에 영향을 미치는 유의한 양(陽)의 변수여서 실천을 위해서는 긍정적인 태도가 선행되어야 하고, 그러기 위하여는 먼저 올바른 지식을 가지고 있어야 함을 알 수 있었다. 이상의 연구결과로 볼 때, 저개발국가에서의 분만환경은 매우 열악한 편으로 모자의 건강수준 향상을 위해서는 예방적 기능으로서 보건교육 활동이 더욱 중요 성을 가지게 된다. 효율적 보건교육활동을 위해서는 보건교육을 보다 긴요하게 요하는 인구군이 어떤 계층이냐 하는 대상파악에 특별히 유념하여야 하는데 주로 교육수준이 낮고 생활이 어려운 인구층, 그리고 보건기관으로부터 멀리 떨어져 있는 사람들에게 중점적으로 교육을 시도하여야 하겠는데 이들 나라는 대부분의 국민이 교육수준이 낮고 생활수준이 낮은 편으로 보건교육시 단순한 지식의 전달에 그칠 것이 아니라 동기 유발을 가져와 행위변화를 할 수 있도록 보다 세밀한 연구노력이 필요하다. 또한 순회진료와 보건교육을 하는 의료캠프가 활성화되어야 하겠다. 향후 저개발국에 의료단을 파견하여 그 지 역의 보건문제 해결에 도움을 주기 위하여는 이와 같은 연구가 계속 진행되어 실천에 영향을 주는 요인들을 밝혀 지역보건의료 프로그램에 적극 활용해야 할 것으로 생각된다.

• 헤리티지:역사와 과학
• /
• 제54권4호
• /
• pp.192-211
• /
• 2021

세종의 대군·군과 세손을 포함하여 총 19기 태실이 모여 있는 성주 세종대왕자 태실은 여러 태실이 한 공간에 조성된 유일한 사례이자, 태를 봉안·보호하는 장태용 그릇의 구성과 조형 역시 다른 곳과 구별되어 주목받아왔다. 본 글은 성주 태실에서 출토된 장태용 그릇 중 하나인 <분청사기 상감연판문 반구형뚜껑>에 집중하여 제작의 특징을 구명하고 제작지 고찰에 초점을 맞추었다. 연구 대상은 태주가 확인된 6점에 한정하였다. 성주 태실은 세종 연간 왕실의 장태와 태실 조성에 관한 다양한 논의와 행사가 가장 성행한 1436~1439년에 계획되고 세워졌을 것이다. 태를 담은 항아리를 덮어 보호하는 목적으로 태와 함께 장태 된 이 분청사기 뚜껑은 장태에 필요한 여러 잡물 가운데 중앙 관청에 분정된 잡물의 용도와 일치하며, 장흥고에서 장태 행렬 이전에 마련하여 조달한 품목으로 유추된다. 뚜껑의 크기·형태·장식 등의 조형적 특징은 15~16세기 왕실용 태항아리 뚜껑과 공통되는 부분이 있고, 『세종실록』 「오례」에 수록된 길례용 제기 및 가례용·빈례용 준작 기물과 친연성이 높다는 점을 확인하였다. 뚜껑의 꼭지를 에워싸고 있는 태토빚음의 번조받침 흔적은 15세기 후반~16세기 전반 왕실용 태항아리 뚜껑에 남아 있는 흔적과 상통한다. 덧붙여 번조받침 흔적의 형태와 위치를 통해 이 분청사기 뚜껑은 꼭지를 아래로 향하게 한 후 받침 도구와 갑발 등을 이용하여 번조하였을 가능성이 있다. 이상의 분석과 『세종실록』 「지리지」에 등재된 자기소 내용, 15세기 전반 자기의 진헌·공납 관련 기록, 현재까지 조사된 분청사기 가마터 출토 유물 등의 정보를 종합적으로 검토하였을 때 이 분청사기 뚜껑을 제작한 곳은 현 광주광역시 북구 충효동 분청사기 가마터가 가장 유력할 것으로 사료된다.

• 헤리티지:역사와 과학
• /
• 제43권3호
• /
• pp.208-241
• /
• 2010

본 고는 조선시대 왕실의 태실에 유존하는 태실 석함(이하 태함)의 현황을 살펴보고, 제작연대를 바탕으로 형식을 분류하여 고고학적인 태함의 양식을 설정하고 그 편년을 시도한 것이다. 태함은 태실을 처음 조성할 때 매납하는 유물이지만 명문이 각자되지 않으므로 태함 자체만으로 연구하기에는 큰 어려움이 따른다. 하지만 태실 조성 시 함께 제작하는 태지석과 아기비의 명문을 찾아 살펴보고 문헌기록을 대조하여 그 제작시기를 밝힘으로 인해 태함의 제작시기도 밝혀 낼 수 있다. 먼저, 편년의 결정적 요소는 태함을 구성하는 함개와 함신 모두임을 알 수 있었으며, 또한 태함의 변화와 양식은 크게 4단계로 구분할 수 있었다. 조선 왕실의 태함의 변화는 조선 초기에는 고려시대의 양식을 이어받아 상자형으로 만들었으나, 15세기 중 후엽에 과도기를 거쳐 15세기 후엽에 반원형 함개 원통형 함신이 정착하게 된다. 그리고 16세기 후엽에는 앞 시기의 양식에서 발전하여 태함에 돌기가 부착되는 등 장식성이 가미되나, 이는 예술성보다는 기능성에 기인한 것으로 판단된다. 하지만 반원형 함개 원통형 함신이 다시 17세기 초에 재현되며, 17세기 중엽 후부터는 함개에만 돌기가 있거나 무보주의 원추형 함개 또는 절구형의 함신 등 다양하게 나타나는 과도기의 현상이 발생한다. 그러나 다시 보주가 부착된 원추형 함개라는 새로운 양식이 18세기 전엽~18세기 중엽 초에 출현하며, 이것이 다음 시기인 18세기 중엽까지 지속되나, 함신의 감실이 일단벽호형의 방형으로 바뀐다. 계속해서 18세기 중엽에는 함개는 앞 시기의 양식을 유지하나 함신은 감실이 다시 한 면이 ㄷ모양의 열쇠구멍형으로 변화한다. 하지만, 18세기 말에 와서 다시 가장 전형적인 양식인 반원형 함개 원통형 함신의 태함이 재출현하여 태함의 양식이 이 형태가 가장 정형성이 있음을 보여준다. 마지막으로 19세기 중엽에는 함개가 반원형에서 상부가 편평한 장방형의 새로운 양식이 출현하여 쇠퇴기를 맞는다. 그리고 이를 다시 양식상 크게 4단계로 구분할 수 있는데, 조선 초에는 태함이 아직 정형화되지 않아 고려시대의 양식을 이어받았으나(I단계; 1401~15C 중엽), 15세기 후엽부터는 자체적인 발전을 거듭하여 정형화되고(II단계; 1477~1641), 시기가 지나면서 다시 일부 돌기나 보주가 부착되는 등 장식성이 가미되나(III단계; 1660~1754), 결국 18세기 말에는 정형화된 양식이 재출현하다가 조선 말기인 19세기 중엽에는 간략화되어 쇠퇴과정을 겪게 되는 것(IV단계; 1790~1874)을 알 수 있었다. 그러므로 이러한 태함의 양식과 편년 결과는 문헌기록이 부족한 상태에서 앞으로 태실지에서 태함만 확인되더라도 그 조성시기와 주인공이 누구인지 밝혀내는 데 많은 도움이 되리라 생각된다.

• 말소리와 음성과학
• /
• 제14권3호
• /
• pp.87-101
• /
• 2022

대전·충남지역 20-30대 여성 언어재활사 50명을 대상으로 주관적 음성 피로도 설문과 더불어 하루 4회기를 기준으로 언어치료 전/후 음성 샘플 수집을 하였다. 연구 결과, Korean Vocal Fatigue Index의 음성 피로로 인한 음성 사용회피 항목과 음성 사용으로 인한 신체 피로 항목에서 피로 집단과 피로 없는 집단 간 유의한 차이가 있었다. 두 집단의 음향음성학적 특성과 관련하여, 두 집단 모두 치료 후 저주파 대역 에너지가 상대적으로 낮아지고 고주파 대역 에너지가 상승하는 패턴을 보였다. 이러한 특징이 분산분석 결과, 주 효과로 나타난 low to high-ratio[t1(time.1)>t2(time.2)], slope_ltas(t2>t1), 3rd formant's energy(t1>t2), high energy(t2>t1) 등에 잘 반영되어 있다. 집단 간 차이는 음향변수들 중 치료 전 모음 연장발성 스펙트럼 저주파 대역의 에너지인 low energy에서만 관찰되었고 피로 없는 집단의 값이 더 컸다(no.fatigue>fatigue in t1). 음향변수에서의 이러한 특징과 더불어 치료 세션 후 피로 없는 집단의 연결발화에서의 왜도 증가는 장시간의 목소리 노동으로 인한 성대 과긴장(higher muscle tonus)과 목소리 남용 때문으로 해석할 수 있다. 섭동변수 shimmer_local은 피로 없는 집단이 언어치료 후 낮아졌고(t1>t2), 켑스트럼 변수인 RNR(rhamonics to noise ratio)은 언어치료 후 값이 높아졌다(t2>t1). NHR(noise to harmonic ratio)은 두 집단 모두 치료 후 낮아졌다. NHR의 감소와 shimmer_local의 하강은 치료 세션을 진행하면서 발성 과정이 안정화되었거나 혹은 전문 지식이 있는 언어재활사(특히 피로 없는 집단)들의 효율적 목소리 사용이 기여했다고 결론지을 수 있다. 피로 없는 집단의 경우는 치료 후에 RNR값이 유의하게 커졌으므로 치료 후 오히려 조화음(harmonic) 구조가 더 안정되었다고도 말할 수 있을 것이다.

• 생명과학회지
• /
• 제32권4호
• /
• pp.325-330
• /
• 2022

수영은 육상과 더불어 대표적인 기초 종목으로 손, 발을 사용하여 물속에서 헤엄치는 종목이기 때문에 기술적 훈련과 더불어 물의 압력에 따른 신체적 적응이 매우 중요하게 고려된다. 수영은 지상의 운동과는 다르게 물속에서 손과 발을 이용해 나아가고, 물의 저항으로 인해 근육을 움직이는 전신운동으로 높게 평가되고 있으며, 비만의 예방과 혈관질환의 치료에 많이 사용되는 운동 중 하나이다. 비교적 안전한 종목에 속하지만 다른 스포츠 종목들과 비슷하게 크고 적은 스포츠 상해가 발생 한다. 하지만 현재까지 수영 종목에서 유발되는 상해와 재활에 관한 연구 자료는 부족한 상황이다. 수영 선수의 상해는 일반적으로 고강도의 훈련, 많은 훈련 량 등으로 인해 발생하며, 수영 선수들에게 가장 많이 발생하는 상해와 질환으로는 극상근건염(supraspinatus tendinitis), 이두근건염(biceps tendinitis), 슬관절의 내측 활액막염(synovitis), 발등의 신근 건염(extensor tendinitis), 요통(low back pain)을 동반하는 척추분리증(spondylolysis), 척주전방전위증(spondylolisthesis) 등이 있다고 보고되고 있다. 또한 수영 경영 선수의 스포츠상해 부위 및 빈도조사 연구분석에 의하면 상해부위는 어깨관절(50%), 허리(23%), 하지(22%) 등의 순으로 높게 나타났으며, 상해종류로는 근육 손상과 인대손상이 대부분을 차지한다. 본 연구결과 수영 종목의 상해 부위는 상지(목, 어깨, 팔, 손목), 하지상해(무릎, 발목), 및 허리상해 순으로 나타났다. 그리고 영법별 상해분석으로 자유형, 배영, 접영 영법에서는 어깨 부위 상해가 많이 발생하였고 회전근개손상, 충돌증후군, SLAP (superior labral tear from anterior to posterior) 병변 순으로 나타났다. 평영 영법은 하지손상인 무릎손상, 평영과 접영은 척수상해, 접영은 허리상해 순서로 나타났다. 따라서 지도자는 선수들이 부상을 당하지 않도록 충분한 준비운동과 정리운동을 실시하도록 하고, 응급처치를 숙지하여 부상 발생 시 빠른 응급처치로 2차 손상을 예방할 수 있도록 해야 한다. 아울러 코치 및 지도자는 선수들에게 알맞는 재활 방법들을 처치하고, 선수들의 상해 예방과 처치에 대한 이해와 교육이 수반되어야 할 것이다. 추후 수영 영법 별 상해 예방과 상해 처치 그리고 재활방법에 관한 구체적인 기전적 연구들이 수행 되어져야 할 것으로 사료된다.

• 대한영상의학회지
• /
• 제84권5호
• /
• pp.1066-1079
• /
• 2023

목적 경막내척수외 뇌실막세포종의 임상 및 영상 특성에 대한 보고는 드물다. 하지만, 발생 위치와 병리학적 특성을 고려하였을 때 점액유두상 뇌실막세포종과 구별하기 어렵다. 본 연구는 경막내척수외 뇌실막세포종과 척수 점액유두상 뇌실막세포종을 구별하기 위한 임상적 특징 및 MRI 영상 특징을 조사하였다. 대상과 방법 종양 크기, 종양의 종축/횡축 위치, 조영 정도/패턴, 동공, 종양 변연, T2 강조 영상(T2-weighted image), T1 강조 영상(T1-weighted image; 이하 T1WI), 종양 아래의 cerebrospinal fluid (이하 CSF) T1 신호강도 증가 및 CSF space로의 종양 전파에 대하여 12개의 병리학적으로 확인된 경막내척수외 뇌실막세포종과 10개의 병리학적으로 확인된 척수 점액유두 뇌실막세포종을 대상으로 분석을 하였다. 또한, 분류 및 트리 분석(classification and tree analysis; 이하 CART) 을 수행하여 경막내척수외 척수 뇌실막세포종을 점액유두 뇌실막세포종과 구별하는 데 중요한 임상적 특징 및 MRI 영상 특징을 조사하였다. 결과 경막내척수외 뇌실막세포종 환자는 척수 점액유두 뇌실막세포종 환자보다 유의하게 나이가 많았으며(48세 vs. 29.5세, p < 0.05), T1W1에서 높은 신호 강도는 점액유두상 뇌실막세포종보다 경막내척수외 척수 뇌실막세포종에서 더 자주 관찰되었다(p = 0.02). 반대로 점액유두상 뇌실막세포종은 지주막하강으로의 종양의 파급을 보였다. CSF 신호 강도는 경막내 척수외 척수 뇌실막세포종보다 점액유두 뇌실막세포종에서 더 자주 관찰되었다(p < 0.05). 종양 아래로의 CSF T1 신호 증가 및 CSF space로의 종양 전파는 경막내척수외 척수 뇌실막세포종과 점액유두 뇌실막세포종을 구별하기 위한 CART 분석에서 가장 중요한 변수였다. 결론 경막내척수외 뇌실막세포종과 척추 점액유두 뇌실막세포종을 구별하는 데 있어 임상 및 MRI 영상의 특징이 도움이 될 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Journal of Chest Surgery
• /
• 제30권5호
• /
• pp.471-478
• /
• 1997

토끼는 심폐바이패스(CPB) 실험동물로서 많은 장점을 가지고 있음에도 불구하고 토끼에서 CPB운용법의 확립은 기술적으로 대단히 어려운 것으로 알려져 있다. 한편 저체온 순환정지법은 심장수술에서 유용하게 사용되고 있으나 뇌 보호상의 문제점이 지적되고 있다. 스테로이드는 일반적으로 뇌부종 치료에 효과가 있는 것으로 알려져 있으나 순환정지시 뇌보호에 미치는 영향에 관해서는 아직 명확하게 규명되지 못하고 있다. 이런 관점에서 본 연구는 첫째 토끼에서 CPB운용법을 확립하고 둘째 이를 바탕으로 순환정지시 스테로이드에 의한 뇌보호 효과를 분석할 목적으로 시행하였다. 흰 토끼 15마리(평균 체중 3,5kg)를 3군의 실험군에 각각 5마리씩 사용하였다. 제 1실험군(대조군)은 순환 정지시 토끼를 수술대와 평행된 자세로 유지하였으며, 제 2실험군에서는 대조군과 다른 실험방법은 동일하나 순환정지시 토끼를 트렌델렌부르그 자세로 유지하였다. 제 3실험군에서는 트렌델렌부르그 자세와 함께 순환정지전 스테로이드(methylprednisolone 30 mg/kg)를 투여하였다. 실험방법은 토끼를 마취시킨후 정중흉골절 개술로 심장을 노출시키고 상행대동맥 및 \ulcorner심방부속지에 각각 3.3mm 동맥캐늘라 및 14 Fr 단일 정맥캐늘라를 삽관하였다. CPB 회로에는 롤러 펌프와 기포형 산화기를 사용하였다. 충전액은 토끼혈액 120-150cc를 포함하여 약 450cc를 사용하였다. 전체 실험시간은 70분으로 심폐바이패스 시작후 10일 동안 관류 및 표면냉각법으로 체온을 20도(직장)까지 감소시킨뒤 40분 동안 순환정지를 시켰다. 순환정지후 관류를 재개하여 20분 동안 재가온으로 체온을 정상화시키면서 심장 박동이 되돌아오는 것을 확인하였다. 관류 유속은 80~ 90mg/min 으로 시작하였고 체온 하강에 따라 유속을 조절하였다. 실험후 토끼를 희생시킨뒤 바로 부검을 시행하여 뇌, 척수, 신장, 십이지장, 폐, 심장, 간장, 비장, 췌장, 위장의 일부를 채취하여 수분함유량을 조사하였다. 각 실험군간의 수분양 비교는 Kruskal-Wallis 비모수 검정법에 의해 분석하였다. CPB 중 관류 유속 변화는 60~l00ml/kg/min 이었다. 동맥압은 대부분 35-55mmhg 사이에서 유지되었다. 재가온후 심장은 전례에서 박동을 재개하였다. 동맥혈가스분석 결과 심한 조직 허혈을 의미하는 정도의 대사 성 산증은 발견되지 않았다. 각 실험군별 조직수분양 측정 결\ulcorner 뇌를 포함한 각 장기들에서 실험군간체 유의 한 차이는 발견되지 않았다. 이러한 실험결과를 통하여 저자들은 (1) 적절한 기법하에서는 토끼에서도 정상 적인 심폐바이패스 운용이 가능하다는 것과, (2) 본 실험 범주에서는 저체온 순환정지시 트렌델렌부르그 자 세에 의한 뇌부종 발현에 대한 스테로이드의 예방효과를 검정할 수없다는 결론을 얻었다.