• 열처리공학회지
• /
• 제12권4호
• /
• pp.303-312
• /
• 1999

An investigation of the CrMoV rotor steel weldment which experienced by cyclic thermal aging heat treatment and as-received condition was performed. This evaluation was carried out to confirm whether this type of weldment is appropriate for the service environment in terms of microstructural examinations, microhardness measurements and tensile tests. The cyclic thermal aging heat treatment, containing continuous heating and cooling thermal cycle was programmed to simulate the real rotor service condition. The heat treatment was performed for 40 cycles(5920hrs). The results indicated that the weldment was composed of 4 different regions such as heat affected zone of the base metal, butter weld(initial weld), full thickness weld(final weld) and the base metal. The double welding process was applied to eliminate the susceptibility of reheat cracking at heat affected zone of base metal. The grain refinement at the HAZ due to the welding process could reduce the possibility of cracking susceptibility, but its tensile properties was appeared to be low due to the weld metal in as-received condition. The benefit effect, grain refinement was extended with carbides coarsening during the cyclic thermal aging heat treatment. However the poor mechanical properties of the weldment was more degraded as undergoing the heat treatment.

• Nutrition Research and Practice
• /
• 제6권1호
• /
• pp.16-20
• /
• 2012

The effects of retrograded rice on body weight gain, gut functions, and hypolipidemic actions in rats were examined. When the retrograded rice was produced by repetitive heating and cooling cycles, it contained significantly higher amounts of resistant starch ($13.9{\pm}0.98%$) than is found in common rice ($9.1{\pm}1.02%$) (P < 0.05). Sprague-Dawley rats were fed either common rice powder or retrograded rice powder, and mean body weight gain was significantly lower in the retrograded rice group (P < 0.05). The liver weight of the retrograded rice group ($14.5{\pm}0.5\;g$) was significantly lower than that of the common rice group ($17.1{\pm}0.3\;g$, P < 0.05). However, the weights of other organs, such as the kidney, spleen, thymus, and epididymal fat pad were not significantly affected by rice feeding. Intestinal transit time tended to be lower in rats fed retrograded rice when compared to rats fed the common rice, but the difference was not significant. The retrograded rice diet significantly increased stool output when compared to that in the common rice powder diet (P < 0.05), whereas fecal moisture content (%) was significantly higher in the retrograded rice group ($23.3{\pm}1.2$) than that in the common rice group ($19.1{\pm}1.2$) (P < 0.05). The retrograded rice group had significantly lower plasma cholesterol (P < 0.05), liver cholesterol (P < 0.05), and triacylglycerol contents in adipose tissue (P < 0.05) when compared to those in the common rice group. In conclusion, retrograded rice had higher resistant starch levels compared with those of common rice powder, and it lowered body weight gain and improved lipid profiles and gut function in rats.

• 한국안전학회지
• /
• 제35권4호
• /
• pp.84-91
• /
• 2020

The Korean nuclear industry developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code and this code adpots two-phase flows, two-fluid, three-field models which are comprised of gas, continuous liquid and droplet fields and has a capability to simulate three-dimensional model. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for accident management plan of nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification work for separate and integral effect experiments is required. In this reason, the goal of this work is to verify calculation capability of SPACE code for multiple failure accident. For this purpose, it was selected the experiment which was conducted to simulate a Multiple Steam Generator Tube Rupture(MSGTR) accident with Passive Auxiliary Feedwater System(PAFS) operation by Korea Atomic Energy Research Institute (KAERI) and focused that the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The MSGR accident has a unique feature of the penetration of the barrier between the Reactor Coolant System (RCS) and the secondary system resulting from multiple failure of steam generator U-tubes. The PAFS is one of the advanced safety features with passive cooling system to replace a conventional active auxiliary feedwater system. This system is passively capable of condensing steam generated in steam generator and feeding the condensed water to the steam generator by gravity. As the results of overall system transient response using SPACE code showed similar trends with the experimental results such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it could be concluded that the SPACE code has sufficient capability to simulate a MSGTR accident.

• 접착 및 계면
• /
• 제7권3호
• /
• pp.16-25
• /
• 2006

내열성 및 투습방수기능을 가진 신발용 직물 및 부직포를 제조하기 위하여 스크린 방식으로 공정조건을 검토하고 투습방수 필름을 라미네이팅 한 후, 최종제품의 물성을 평가하였다. 결과는 다음과 같다. 열가소성 핫 멜트와는 달리 반응형 폴리우레탄 핫 멜트는 작업 이후에 적정한 내열성을 보유하는 것으로 나타났다. 최적의 용융접착 공정조건은 다음과 같다 ; 드럼 온도 $95^{\circ}C$, 호스 온도 $97^{\circ}C$, 공급파이프 온도 $100^{\circ}C$, 스크린 온도 $105^{\circ}C$이고, opposite roller의 압력은 $1kgf/cm^2$, laminating roller의 압력은 $3kgf/cm^2$이며, 가공속도는 15 m/min이다. 투습도는 필름의 두께가 증가함에 따라 투습도는 감소하였으나, 내수도는 증가하였고, 공기투과도는 필름의 영향이 지배적이었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.166-171
• /
• 2008

We cannot imagine any more the environment and energy problems are separated from our lives. The various attempts to solve these problems are made all over the world. In this study it was performed to analyze a different heating and cooling load depending on the earth-sheltering method and kind of soils by using TRNSYS 16 as the first step to establish the design guidelines for earth-sheltered architecture, one of the eco-friendly and low energy consuming building types. After performing this simulation, we found the result like this. It is the most lowest load in case of all of walls and roof being earth-sheltered. But considering of the load reduction rate, the effect of earth-sheltering the exterior vertical wall is more efficient for load reduction than the one of earth-sheltering a roof. And we got a lower thermal load in case of a lower heat conductivity of soil. Afterwards we will conduct a further study for boundary condition at earth-sheltered surface and the simulation analysis about the sensitivity variables. The final goal of this study is preparing the design guidelines for earth-sheltered architecture. so we will contribute to building energy saving.

• 사상체질의학회지
• /
• 제16권1호
• /
• pp.44-52
• /
• 2004

1. Objects of Research This research is purposed to find Dong-mu's thought on Pharmacology, through summarizing sentences related to pharmacology proposed in the chief writings on Sasang Constitutional Medicine. 2. Methods of Research It was researched bibliologically with Dong-mu's chief medical writings such as "Dongyi Suse Bowon Sasang Chobongyun(東醫壽世保元四象草本卷)", "Dong-mu's posthumos work(東武遺藁)", "Dongyi Suse Bowon(東醫壽世保元)". 3. Results and Conclusions 1. The grouping criteria according to the constitution proposed in "Dongyi Suse Bowon Sasang Chobongyun" is 'Spreading Outside' 'Hardening Inside' 'Cooling Organ' 'Warming Inside', but the grouping of medical herbs according to the constitution is yet not accomplished, and medical herbs is comprehended on base of effectiveness as like existing oriental medicine. 2. The grouping criteria according to the constitution proposed in "Dong-mu's posthumos work"is 'Spreading Choking Raising Lowering' and 'Perfume Smell Fluid Taste', and medical herbs is comprehended on base of effectiveness as like "Chobongyun", and the example on mixing of the herb classified according to the constitution is showed. 3. The medical herbs are comprehended on the basis of how to effect on treatment of constitutional disease, and the principle that it's not to mix of the herb classified according to the constitution is proposed in "Dongyi Suse Bowon". 4. The pharmacology of Sasang Constitutional Medicine is accomplished after it is modified many ti mes through clinic experience for a long time. 5. The pharmacology of Sasang Constitutional Medicine in the early period, is to comprehend herbs on the basis of how to complement 'Spreading Gathering Raising Lowering' of 'Small-Organ(偏小之臟)' according 'Qi-Mei(氣味)' and effectiveness, but that in the late period is to comprehend herbs on the basis of how to complement or to control 'Small-Organ(偏小之臟)' and 'Large Organ(偏大之臟)'.

• 소성∙가공
• /
• 제29권3호
• /
• pp.135-143
• /
• 2020

Low-cost alloying elements were added to a modified Al-6.5Si alloy and its microstructure, tensile and impact toughness properties were investigated. The alloying elements added were Mg, Zn, and Cu, and two kinds of alloy A (Mg:0.5, Zn:1, Cu:1.5 wt.%) and alloy B (Mg:2, Zn:1.5, Cu:2 wt.%) were prepared. In the as-cast Al-6.5Si alloys, Si phases were distributed at the dendrite interfaces, and Al₂Cu, Mg₂Si, Al₆ (Fe,Mn) and Al₅ (Fe,Mn)Si precipitates were also observed. The size and fraction of casting defects were measured to be higher for alloy A than for alloy B. The secondary dendrite arm spacing of alloy B was finer than that of alloy A. It was confirmed by the JMatPro S/W that the cooling rate of alloy B could be more rapid than alloy A. The alloy B had higher hardness and strength compared to the values of alloy A. However, the alloy A showed better impact toughness than alloy B. Based on the above results, the deformation mechanism of Al-6.5Si alloy and the improving method for mechanical properties were also discussed.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.6-12
• /
• 2015

Thermal fatigue life of the automobile exhaust manifold is directly affected by the restraint force according to the structure of exhaust system and bead shape of the welded joints. In the present study, the microstructural changes and precipitation behavior during thermal fatigue cycle of the 18wt% Cr ferritic stainless steel weld heat affected zone (HAZ) considering restraint stress were investigated. The simulation of weld HAZ and thermal fatigue test were carried out using a metal thermal cycle simulator under complete constraint force in the static jig. The change of the restraint stress on the weld HAZ was simulated by changing the shape of notch in the specimen considering the stress concentration factor. Thermal fatigue properties of the weld HAZ were deteriorated during cyclic heating and cooling in the temperature range of $200^{\circ}C$ to $900^{\circ}C$ due to the decrease of Nb content in solid solution and coarsening of MX type precipitates, laves phase, $M_6C$ with coarsening of grain and softening of the matrix. As the restraint stress on the specimen increased, the thermal fatigue life was decreased by dynamic precipitation and rapid coarsening of the precipitates.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.109-112
• /
• 2007

양송이의 유통과정중 선도연장을 위해 수확 후 예냉처리와 포장개선 시도가 행해졌다. 기존의 관행적인 골판지상자에 담아 무예냉 상온유통하는 방법과 예냉처리후 스티로폼 상자에 담아 냉장수송한 양송이에 대하여 $10^{\circ}C$와 $25^{\circ}C$에 보관하면서 품질 변화를 조사하였다. 예냉처리에 의해 양송이의 호흡속도는 2-3배 억제되었으며 감소율은 $25^{\circ}C$에서는 2일후 무예냉구가 15%, 예냉구가 7% 정도, $10^{\circ}C$에서는 3일후에 무예냉구가 7%, 예냉구는 0.3% 정도로 나타났다. 표면색을 나타내는 L-value는 예냉처리구가 높게 나타났으며 저장중 생육정도를 나타내는 갓과 줄기의 길이도 예냉처리에 의해 더 작게 나타났다. 전반적으로 예냉처리와 보냉 유통을 통해 여름철 양송이의 선도는 기존 1-2일 정도에서 3-4일 정도로 연장되었다.

• 한국음향학회지
• /
• 제39권2호
• /
• pp.98-104
• /
• 2020

에어컨 운전 중에 발생하는 실내기의 수축팽창 소음 현상을 분석하고, 발생위치를 평가한다. 그리고 마찰실험을 통하여 수축팽창 소음을 유발하는 인자를 규명하고자 한다. 먼저 항온·항습챔버에서 운전 환경 조건별로 수축팽창 소음의 발생횟수 및 특성을 분석하고, 분해법을 이용하여 냉방 및 난방 시 모두 하부 데코에서 발생하는 것을 확인하였다. 실내기에서 발생하는 수축팽창 소음은 하부 데코와 연결되는 부품들과의 체결부에서 발생하는 스틱슬립 현상에 의한 것으로 이러한 소음을 유발하는 인자를 규명하기 위하여 마찰실험을 진행하였다. 또한 마찰실험 결과의 효과적 분석을 위하여 십점평균 산출법을 도입하고, 실험 결과에서 Acrylonitrile Butadiene Styrene(ABS) 재질 간에 접촉하면 스틱슬립 현상을 유발하며 체결부의 양면에 표면조도를 증가하는 것이 소음저감에 효과적임을 확인하였다.