• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.440-445
• /
• 2008

The present study was investigated the effect of the driving condition on the performance of a louver fin and tube type heat exchanger under frosting condition. Heat transfer rate and pressure drop by frost were experimentally investigated. Effects of the wet blub temperature and the shape of a fin on heat transfer performances has been also investigated. The key parameters were fin type(louver and corrugate fin) and the wet blub temperature of air (0.5, 1.0, $1.5^{\circ}C$). The heat transfer performance of the louver fin and tube type heat exchanger was higher by 0.89% than the corrugate fin type. As the wet blub temperature of air were increased, the heat transfer rate, pressure drop and mass of frost of three test models(Type A, B, C) were increased. Especially, the maximum heat transfer rate and maximum pressure drop were shown for the louver fin and tube type heat exchanger. As a experimental result, the enhancement factor(EF) of louver fin and tube type heat exchanger was $0.2{\sim}0.4$ due to the high pressure drop.

• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.449-456
• /
• 2018

본 연구에서는 네일 보강설계에 따른 국부 쐐기파괴의 안정성 검토가 가능한 네일 설계방법을 제안하기 위해, 국부 쐐기파괴에 대한 파괴 메커니즘을 확인하고 이에 대한 안전율 산정식을 개발하였다. 개발된 이론식을 이용하여 네일 보강여부, 지반조건, 네일 보강설치 패턴을 변화시켜 가면서 해석을 수행하였다. 또한 이를 바탕으로 각 영향요소에 대한 민감도 분석을 실시하였다. 해석 및 분석결과, 네일로 보강된 비탈면의 경우 무보강 비탈면 보다 안전율이 설계기준 이상으로 증가하였으며, 지반조건에 따른 비탈면의 안전율은 건기 시, 우기 시, 우기 시의 침투조건 순으로 증가하였다.

• East Asian mathematical journal
• /
• 제36권5호
• /
• pp.583-591
• /
• 2020

In [8, 9] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities. They consider the Poisson equations with corner singularities, compute the finite element solutions using standard Finite Element Methods and use the extraction formula to compute the stress intensity factor(s), then they posed new PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor(s), which converges with optimal speed. From the solution they could get an accurate solution just by adding the singular part. The error analysis was given in [5]. In their approaches, the singular functions and the extraction formula which give the stress intensity factor are the basic elements. In this paper we consider the biharmonic problems with the cramped and/or simply supported boundary conditions and get the singular functions and its duals and find properties of them, which are the cornerstones of the approaches of [8, 9, 10].

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.466-475
• /
• 2006

Reliability analysis between safety factor and reliability index for driven and bored pile load capacity was analyzed in this study. 0.1B, Chin, De Beer, and Davisson's methods were used for determining pile load capacity by using load-settlement curve from pile load test. Each method define ultimate, yield and allowable pile load capacities. LCPC method using CPT results was performed for comparing with results of pile load test. Based on FOSM analysis using load factors, it is obtained that reliability indices for ultimate pile load capacity were higher than those of yield and allowable condition. Present safety factor 2 for yield and allowable load capacities are not enough to satisfy target reliability index $2.0\sim2.5$. However, it is sufficient for ultimate pile load capacity using safety factor 3.

• 한국과학교육학회지
• /
• 제23권5호
• /
• pp.574-591
• /
• 2003

과학학습에서 인지갈등의 긍정적인 혹은 때때로 부정적인 영향에 관한 논의들이 아직까지 진행되고 있다. 그러나 분명한 것은 개념변화이론에 따르면 인지갈등이 개념변화에 중요한 역할을 한다는 것이다. 이 연구의 목적은 개념변화과정에서 인지갈등의 역할을 자세히 살펴보는 것이다. 구체적인 연구문제는 다음과 같다. 1) 불일치 상황은 인지갈등의 필요조건 혹은 충분조건인가? 2) 인지갈등은 개념변화의 필요조건 혹은 충분조건인가? 이 문제를 해결하기 위하여, 우리는 관련 문헌들 속의 이론과 결과들을 분석하였다. 마무리부분에서는 개념변화과정에서 인지갈등의 복잡한 역할과 앞으로의 연구과제에 대하여 논의 하였다.

• 대한방사선치료학회지
• /
• 제22권1호
• /
• pp.53-60
• /
• 2010

목 적: 향상된 동적쐐기인자(EDW-Factor)의 핵심 내용을 적용한 수식으로 EDW-Factor을 쉽게 계산하고, 측정을 통하여 유효성을 평가하고자 한다. 대상 및 방법: EDW-Factor의 계산을 위한 구간선량표(Golden Segmented Treatment Table, GSTT)는 제공된 값을 이용하였다. 검출기는 물팬텀(Phantom)에서 0.6 cc 파머형 전리조와 전위계를 사용하였다. 측정은 선원표면거리 100 cm에서 측정점을 각 에너지의 최대선량점으로 하여 시행하였다. 광자선 에너지는 6 MV와 15 MV 모두 측정하였고, EDW는 Y1-OUT방향에서 $60^{\circ}$, $30^{\circ}$, $20^{\circ}$ EDW을 선택하였다. 치료계획시스템은 Eclipse planning system (Varian, USA)을 이용하였다. 모든 조사야와 EDW 방향에 대하여 EDW-Factor를 계산할 수 있도록 하고, 측정은 EDW-Factor의 특징을 잘 나타낼 수 있도록 EDW-Factor의 X, Y-jaw 의존성과 OFF-Axis 조사야 영향을 검증할 수 있는 조사야를 선택하였다. 결 과: Y1 조사야가 달라지면 EDW-Factor는 달라지고 그에 따라 측정값도 다르게 나타지만 계산값과 측정값의 오차는 1% 이내였다. 계산중심점(측정점)이 치료중심(isocenter)이거나 아니거나 EDW의 각도가 적어질수록 계산값과 측정값의 오차가 적어지는 경향을 나타내었다. 전체 조사야 크기 및 에너지에 따른 오차의 경향은 찾을 수 없었다. 측정 조건을 치료계획시스템에서 구현하여 얻어지는 MU와 상용프로그램에서 얻어진 EDW-Factor을 이용한 매뉴얼 계산 MU을 비교한 결과 그 차이가 없음을 알 수 있었다. 결 론: 일반적으로 알려진 EDW-Factor식에서 fitting 값을 제외하고 EDW-Factor의 핵심내용만을 적용한 수식으로 EDWFactor를 계산하고 측정하여 검증하였을 때 오차는 1% 이내로 보여, 정확한 EDW-Factor 계산 값을 얻을 수 있었다. 또한 상용프로그램에서 구현하여 각각의 조사야에서 EDW-Factor를 측정하지 않고, 보편적으로 쉽게 EDW-Factor를 얻을 수 있도록 하였다.

• Water Engineering Research
• /
• 제5권1호
• /
• pp.1-16
• /
• 2004

The purpose of this study is to understand the characteristics of hourly PET(Potential Evapo Transpiration) variation estimated using Penman ET model. The estimated PET using Penman model was compared with measured ET. For this study, two subwatersheds were selected, and fluxes, meteorological data and soil moisture data were measured during the summer and winter days. During the winter days, the aerodynamic term of Penman ET is much greater than that of energy term of Penman ET for dry soil condition. The opposite phenomena appeared fer wet soil condition. During the summer days, energy term is much more important factor for ET estimation compared with aerodynamic term regardless of soil moisture condition. Penman ET, measured ET, and energy term show the similar hourly variation pattern mainly because the influence of net radiation on the estimation of Penman ET is much more significant compared with other variables. Even though there are much more soil moisture in the soil during the wet days, the estimated hourly ET from Penman model and measured hourly ET have smaller values compared with those of dry days, indicating the effect of cloudy weather condition.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.207-207
• /
• 1991

The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson,s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.67-75
• /
• 1991

The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson, s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1365-1367
• /
• 2003

In this paper, element technologies such as soldering. arrangement and lamination processes for photovoltaic module manufacture were examined and described as main processes. Especially solder paste and temperature condition in soldering process, loss factor in arrangement process and process conditions in lamination process are investigated to minimize the electrical loss. As a results, temperature condition in soldering process was found to be critical to contact resistance of electrode and life-time. Productivity of the process decreases dramatically by physical damage during arrangement process. Pressure level and press condition of upper chamber in lamination process were important parameters for the reliability. According to the test result of photovoltaic module, electrical properties dropped about $5{\sim}25%$ after 5 years.