• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.152-156
• /
• 2010

This study is focused on the channel design of bipolar plate in the electrode of hydrogen gas generator. The characteristics of hydrogen gas generation was studied in view of efficiency of hydrogen gas generation rate and a tendency of gas flow through the riv design of electrode. Since the flow rate of generated gas is the most crucial in determining the efficiency of hydrogen gas generator, we adopted the commercial analytical program of COMSOL $Multiphysics^{TM}$ to calculate the theoretical flow rate of hydrogen gas from the outlet of gas generator.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.268-272
• /
• 2023

This study explores the characteristics of tilting pad journal bearings used in the high-speed rotating shaft systems of centrifugal compressors. A centrifugal compressor is a high-speed rotating machine that is widely used to compress gases or vapors employed in various industrial applications. It transfers the centrifugal force of a fast-spinning impeller to the fluid and compresses it under high pressure. Many high-speed rotating shaft systems, which require high stability, use tilting pad journal bearings. The characteristics of these bearings can vary depending on several properties, and identifying the appropriate characteristics is essential to optimize the design on a case-to-case basis. In this study, the authors perform a time-dependent analysis of the properties of tilting pad journal bearings and the rotordynamics of the rotating shaft system using COMSOL Multiphysics software. Specifically, the authors analyze the characteristics of the tilting pad journal bearings by performing a parametric sweep using parameters such as pad clearance, maximum tilting angle, preload, number of pads, and pad pivot offset. The authors then use the results of the bearing-characteristics analysis to evaluate the vibration of the rotating shaft and verify its operation within a desirable range. The understanding gained from this study will allow us to determine the optimal properties of these bearings and the limiting operational speed using COMSOL Multiphysics software.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.643-659
• /
• 2022

Geologic sequestration technologies such as CCS (carbon capture and storage), EGS (enhanced geothermal systems), and EOR (enhanced oil recovery) have been widely implemented in recent years, prompting evaluation of the mechanical stability of storage sites. As fluid injection can stimulate mechanical instability in storage layers by perturbing the stress state and pore pressure, poroelastic models considering various injection scenarios are required. In this study, we calculate the pore pressure, stress distribution, and vertical displacement along a surface using commercial finite element software (COMSOL); fault slips are subsequently simulated using PyLith, an open-source finite element software. The displacement fields, are obtained from PyLith is transferred back to COMSOL to determine changes in coseismic stresses and surface displacements. Our sequential use of COMSOL-PyLith-COMSOL for poroelastic modeling of fluid-injection and induced-earthquakes reveals large variations of pore pressure, vertical displacement, and Coulomb failure stress change during injection periods. On the other hand, the residual stress diffuses into the remote field after injection stops. This flow pattern suggests the necessity of numerical modeling and long-term monitoring, even after injection has stopped. We found that the time at which the Coulomb failure stress reaches the critical point greatly varies with the hydraulic and poroelastic properties (e.g., permeability and Biot-Willis coefficient) of the fault and injection layer. We suggest that an understanding of the detailed physical properties of the surrounding layer is important in selecting the injection site. Our numerical results showing the surface displacement and deviatoric stress distribution with different amounts of fault slip highlight the need to test more variable fault slip scenarios.

• Journal of the KSME
• /
• v.54 no.6
• /
• pp.41-45
• /
• 2014

이 글에서는 다물리(Multiphysics) 전산해석에 고려되어야 하는 사항들을 표현하고, 이를 위해 개발되어온 소프트웨어의 개발 현황을, 연성해석 분야에서 널리 사용되고 있는 COMSOL Multiphysics를 중심으로 소개하고자 한다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.55-56
• /
• 2019

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.239-240
• /
• 2018

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.180-180
• /
• 2022

최근 하천 횡단구조물로 형성된 호소 및 저수지에는 오랜 시간동안 다양한 유기 퇴적물이 유입되고 오염되어 호소환경 및 호소 생태계에 악영향을 미칠 수 있으며, 환경 여건에 따라 메탄과 온실가스를 유발할 수도 있다. 이러한 온실가스를 검출하고 그 원인을 파악하여 감축하는 일련의 기술이 국가적인 온실가스 감축 정책과 맞물려 새로운 이슈로 등장하였다. 일반적으로 메탄가스를 측정하는 실험은 BMP(Biochemical Methane Potential)-Test이며, 수치모의에 비해 BMP-Test는 수심이 깊은 지역이나 유속이 빠른 구역에는 적용이 어려운 한계가 존재한다. 이러한 BMP-Test의 한계점을 보완하는 차원에서 사전검증된 수치모형 COMSOL Multiphysics 소프트웨어를 이용하여 메탄가스 발생기작을 재현 및 도출하고 실내 실험결과와 비교 분석하였다. 첫째, COMSOL Multiphysics가 호소에서 발생하는 메탄가스 발생기작의 재현 타당성을 입증하기 위해 동일한 조건의 인공합성된 유기물을 이용한 실내 실험에서 수행된 BMP-Test와 비교·분석을 수행하였다. 둘째, COMSOL Multiphysics에 TOC(총유기탄소), TP(총 인)에 따른 유기물 조건과 메탄 발생 화학식을 설정하여 온도에 따른 메탄 생성량과 반응상수를 산출하였고, 이를 BMP-Test 결과와 비교하였다. BMP-Test의 비교·분석 결과를 바탕으로 하천 및 호소에서 발생하는 메탄가스 발생에 대한 COMSOL Multiphysics의 활용가능성을 검증하였다. 향후 하천 및 호소로부터의 발생가능한 온실가스 감축 목표를 달성하기 위한 하천 유기물 환경의 평가 또는 최적화 조성에 유사한 검증과정을 거친 COMSOL Multiphysics를 활용할 수 있을 거라 기대된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.111-111
• /
• 2009

In this work, we discuss simulation of surface acoustic wave device using Comsol Multiphysics. The structure SAW device based on piezoelectric thin film aluminum-nitride (AlN) on silicon was simulated. Some parameters of SAW device such as surface velocity, displacement of piezoelectric thin film were evaluated by software. Many modes and shapes of wave are also discussed in this paper. For evaluation physical parameters of AlN piezoelectric layer, the SAW resonator was modeled and simulation results were also compared with experiment results. we simulated arid evaluated the surface Rayleigh wave of AlN thin film on silicon substrate. Results simulation and experiment showed the surface velocity of AlN thin film was about 5200 m/s and shape of surface wave was also displayed. This paper has also proposed as method to study SAW characteristic of piezoelectric thin film and found out measurement values accurately of film such as stiffness matrix, piezoelectric matrix. These values are very important in calculation and design SAW device or MEMS device based on AlN piezoelectric layer.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.415-420
• /
• 2010

This study is focused on the channel design of bipolar plate in the electrode of hydrogen gas generator. The characteristics of hydrogen gas generation was studied in view of efficiency of hydrogen gas generation rate and a tendency of gas flow through the riv design of electrode. Since the flow rate and flow pattern of generated gas in the two phase flow system are the most crucial in determining the efficiency of hydrogen gas generator, we adopted the commercial analytical program of COMSOL MultiphysicsTM to calculate the theoretical flow rate of hydrogen gas from the outlet of gas generator and flow pattern of two phase fluid in the electrode. In this study, liquid electrolyte flows into the bipolar plate and decomposed into gas phase, two phase flow simulation is applied to measure the efficiency of hydrogen gas generation.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.150-160
• /
• 2011

This study focuses on the Achard turbine, a vertical axis, cross-flow, marine current turbine module. Similar modules can be superposed to form towers. A marine or river hydropower farm consists of a cluster of barges, each gathering several parallel rows of towers, running in stabilized current. Two-dimensional numerical modelling is performed in a horizontal cross-section of all towers, using FLUENT and COMSOL Multiphysics. Numerical models validation with experimental results is performed through the velocity distribution, depicted by Acoustic Doppler Velocimetry, in the wake of the middle turbine within a farm model. As long as the numerical flow in the wake fits the experiments, the numerical results for the power coefficient (turbine efficiency) are trustworthy. The overall farm efficiency, with respect to the spatial arrangement of the towers, was depicted by 2D modelling of the unsteady flow inside the farm, using COMSOL Multiphysics. Rows of overlapping parallel towers ensure the increase of global efficiency of the farm.