• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.289-293
• /
• 1996

The basic study on laser triggered lightning was carried out for the active protection of lightning in power transmission system. The lengths of generated plasma channels were simulated numerically for variations of energy and pulse width of CO$_{2}$ laser by Runge-Kutta-Gill method. As results, the effective lengths of plasma channels were 2.3m, 2.67m and 3.4m respectively for energy of 45J, 60J and 100J of CO$_{2}$ laser pulse with pulse width of 50nsec using focusing mirror with focal length of 10m. And also the effects of pulse width of first pulse and tail pulse of CO$_{2}$ laser on the length of plasma channel were examined.

• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.17-31
• /
• 2023

세계적으로 화석 연료의 무분별한 사용으로 지구 온난화가 가속화되면서 대기 중 이산화탄소 농도를 줄이기 위한 다양한 노력이 진행되고 있다. 전기화학적 이산화탄소 환원 기술은 이산화탄소를 유용한 탄화수소 화합물로 전환할 수 있는 친환경 기술로 인정받고 있는 유망한 기술로 탄소중립을 달성하기 위해 필수적이라는 의견이 지배적이다. 이산화탄소 환원 전극으로 사용되는 많은 물질 중에서도 구리는 C₂₊ 화합물을 생성할 수 있는 유일한 금속으로 알려져 있으나 낮은 전환 효율과 선택도로 인해 아직 상용화되기에는 어려움이 있어 이를 해결하기 위해 다양한 연구가 이루어지고 있다. 본 리뷰에서는 구리 기반 전극을 활용한 다양한 이산화탄소 환원 연구들을 소개한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.57-60
• /
• 2008

KEPRI has studied planar type SOFC stacks using anode-supported single cells and kW class co-generation systems for residential power generation. A 1kW class SOFC system consisted of a hot box part, a cold BOP part and a water reservoir. A hot box part contains a SOFC stack made up of 48 single cells and ferritic stainless steel interconnectors, a fuel reformer, a catalytic combustor and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation. A cold BOP part was composed of blowers, pumps, a water trap and system control units. When a 1kW class SOFC system was operated at $750^{\circ}C$ with hydrogen after pre-treatment process, the stack power was 1.2kW at 30 A and 1.6kW at 50A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about 1.3kW with hydrogen and 1.2kW with city gas respectively. The system also recuperated heat of about 1.1kW by making hot water.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.25-31
• /
• 2023

화학적 CO₂ 흡수 공정에 많이 사용되는 모노에탄올아민(MEA)을 사용하여 매립지가스(LFG)에서 이산화탄소(CO₂)를 포집하여 매립지가스를 이용한 발전용 엔진의 열효율을 증가시키고자 하는 것이 본 연구의 목적이다. LFG를 에너지원으로 사용하는 것은 온실가스 배출량을 줄이는 수단이 될 수 있기 때문에 MEA를 이용하여 LFG 중의 CO₂를 줄이고 CH₄의 농도를 높여 발전 효율을 향상시킬 수 있게 된다. 본 연구에서는 MEA 용액에서 CO₂와 CH₄의 용해도를 측정하고 다양한 조건에서 용해도를 높이고 용해 특성을 분석하기 위해 실험을 수행했다. 그 결과 반응 가스에 대한 MEA의 비율이 증가함에 따라 CO₂ 흡수율이 증가하는 것으로 나타났다. CO₂ 용해도를 최대화하기 위한 최적의 MEA 농도가 있으며, 이 농도 이상으로 농도를 높여도 용해도가 크게 향상되지 않았다. 본 연구는 온실가스 배출량을 줄이면서 LFG에서 CO₂를 포집하고 CH₄의 농도를 높여 보다 실용적인 연료를 개발할 수 있는 기반 연구를 수행했다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.554-559
• /
• 1999

The purpose of this study is the machining of texture shapes by the contour fitting data. The hardware of the system comprises PC and scanning system, CO2 laser machine. There are four steps, (1) text image loading using scanning shapes or 2D image files, (2) generation of contour fitting data by the line and arc, cubic Bezier curve, (3) generation of NC code from the contouring fitting data, (4) machining by the DNC system. It is developed a software package, with which can conduct a micro CAM system of CNC laser machine in the PC without economical burden.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1599-1605
• /
• 2008

The research was conducted in order to improve the hydrogen generation efficiency of the electrical plasma technology from tap water by using $TiO_2$ photocatalyst, mixed Cu - $TiO_2$ powder, and mixed Ni - $TiO_2$ powder as the catalysts. Experiments were performed with the pulsed power and nitrogen carrier gas. The result has shown that the hydrogen concentration with the presence of $TiO_2$ powder was created higher than that of without using photocatalyst. The hydrogen concentration with using $TiO_2$ was 3012ppm corresponding to the applied voltage of 16kV, while it without using the $TiO_2$ was 1464ppm at the same condition . The effect of $TiO_2$ powder was strongly detected at the applied voltages of 15kV and 16kV. This phenomena might be resulted from the co-effect of the pulsed power discharge and the activated state of $TiO_2$ photocatalyst. The co-effect of the mixed catalysts such as Cu-$TiO_2$ and Ni-$TiO_2$ (the mixed photocatalyst $TiO_2$ and transition metals) were also investigated. The experimental results showed that, Cu and Ni powder dopants were greatly enhancing the activity of the $TiO_2$ photocatalyst. Under these experimental conditions the extremely high hydrogen concentrations at the optimal point were produced as 4089ppm and 6630ppm, respectively.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.64-71
• /
• 2014

Accelerated carbonation is a technique that can be used as a CCS technology for $CO_2$ sequestration of approximately 5~20% in a stable solid through the precipitation of carbonate. An alkaline inorganic waste material such as ash, slag, and cement paste are generated from incinerators, accelerated carbonation offers the advantage of lower transport and processing costs at the same generation location of waste and $CO_2$. In this study, we evaluated an amount of $CO_2$ sequestration in various types of inorganic alkaline waste processed by means of accelerated carbonation. A quantitative evaluation of $CO_2$ real sequestration based on a TG/DTA analysis, the maximum 118.88 $g/kg_{-waste}$ of $CO_2$ in paper sludge fly ash, the maximum 134.46 $g/kg_{-waste}$ of $CO_2$ in municipal solid waste incinerator bottom ash, the maximum 9.72 $g/kg_{-waste}$ of $CO_2$ in industrial solid waste incinerator fly ash, and the maximum $18.19g/kg_{-waste}$ of $CO_2$ in waste cement paste.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.152-161
• /
• 2024

In this study, a fuel cell system for future defense unmanned vehicles was designed and validated. A Co/Al₂O₃-Ni foam catalyst for NaBH₄ hydrolysis was characterized using several analytical methods. A NaBH₄ hydrogen generation system with the Co/Al₂O₃-Ni foam catalyst continuously generated hydrogen at elevated reaction temperatures. The fuel cell system with the NaBH₄ hydrogen generation system was designed and tested. The performance of the fuel cell system was comparable to that of the fuel cell system using pure hydrogen. Therefore, the fuel cell system with the NaBH₄ hydrogen generation system is a suitable power source for future defense unmanned vehicles owing to its easy refueling and simple system.

• 전기저널
• /
• 4호통권136호
• /
• pp.37-41
• /
• 1988

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.435-441
• /
• 2010

To verify the possibility of a power generation system using biogas from the waste of pig farm for rural electric production, a SI gasoline engine is modified to use biogas fuel and was installed in a 20 KVA power generation system. An electronic speed regulation unit is developed to keep the system speed at 1500 rpm. Experimental investigations have been carried out to examine the performance characteristics of power generation system (such as: system frequency, phase output voltage,$\ldots$). In addition, the operating parameters and output emissions ($NO_x$, HC, and $CO_2$) of biogas-fueled engine are preliminary evaluated and analyzed for the change of system load. Results indicated that the researched power generation system shows a high stability of output voltage and frequency with help of speed regulator. Biogas fuel (mainly $CH_4$ and $CO_2$) has an environmental impact and potential as a green alternative fuel for SI engine and they would not require significant modification of existing engine hardware. Output emissions of biogas-fueled engine are found to be relative low. $NO_x$ emission increases with the increase of output electric power of the power generation system.