• 한국기후변화학회지
• /
• 제8권4호
• /
• pp.357-367
• /
• 2017

Electricity generation in Korea mainly depends on thermal power and nuclear power. Especially the coal power has led to the increase in $CO_2$ emissions. This paper intends to analyze the current status of $CO_2$ emissions from electricity generation in Korea during the period 1990~2016, and apply the logarithmic mean Divisia index (LMDI) technique to find the nature of the factors influencing the changes in $CO_2$ emissions. The main results as follows: first, $CO_2$ emission from electricity generation has increased by $165.9MtCO_2$ during the period of analysis. Coal products is the main fuel type for thermal power generation, which accounts about 73% $CO_2$ emissions from electricity generation. Secondly, the increase of real GDP is the most important contributor to increase $CO_2$ emissions from electricity generation. The carbon intensity and the electricity intensity also affected the increase in $CO_2$ emission, but the energy intensity effect and the dependency of thermal power effect play the dominant role in decreasing $CO_2$ emissions.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.531-536
• /
• 2016

세계적으로 온실가스저감에 대한 요구가 높아지고 있는 가운데 고효율 발전 시스템의 개발에 대한 연구개발이 꾸준히 진행되고 있다. 초임계 $CO_2$ 발전기술은 효율 향상과 소형화, 다양성의 장점을 가지고 있어, 2000년대 이후 세계 여러 나라에서 연구개발에 박차를 가하고 있다. 초임계 $CO_2$ 발전 시스템은 $CO_2$를 작동유체로 하는 발전 시스템으로 크게 간접가열방식과 직접가열방식으로 구분될 수 있다. 현재, 대부분의 연구는 간접가열방식의 초임계 $CO_2$ 발전 시스템 개발에 집중되어 있고, 미국은 NREL을 중심으로 태양열 연계 초임계 $CO_2$ 발전 시스템을 개발 중이며, DOE는 올 해 화력 연계 초임계 $CO_2$ 발전 시스템 개발에 대한 투자도 시작할 계획이다. GE는 10MW급 초임계 $CO_2$ 발전 시스템 개발뿐만 아니라, 50MW급과 450MW급 초임계 $CO_2$ 발전시스템의 개념 설계도 진행 중에 있다. 우리 나라에서는 원자력연구원이 초임계 $CO_2$ 발전시험 설비를 구축해오고 있으며, 한국전력공사 전력연구원은 현대중공업과 함께 디젤 및 가스엔진 폐열을 이용하여 2MW급 초임계 $CO_2$ 발전시스템 개발을 진행 중에 있다.

• 자원ㆍ환경경제연구
• /
• 제30권4호
• /
• pp.607-625
• /
• 2021

본 연구는 우리나라 발전 부문의 원자력과 신재생에너지 발전의 온실가스 감축효과를 추정하고, 원자력 발전의 사고위험에 따른 외부비용을 포함한 발전 비용을 고려하여 두 발전원의 온실가스 감축비용의 효율성을 비교하였다. 모형의 추정결과, 원자력 및 신재생에너지 발전 1% 증가는 각각 0.744%와 0.127%의 CO₂ 배출량을 감축시키는 것으로 분석되었다. 이는 CO₂ 배출량을 1% 감축시키기 위해서는 원자력 발전은 1.344%, 신재생에너지 발전은 7.874% 증가시켜야 함을 의미한다. 추정된 계수와 원자력 발전의 외부비용 포함 발전비용을 사용하여 1%의 CO₂ 배출량 감축을 위한 총 비용을 도출한 결과, 전체 발전량이 1MWh로 가정할 때 CO₂ 배출량 1%를 감축시키기 위한 원자력 발전비용은 외부비용에 따라 0.72~1.49달러로 계산되었으며, 신재생에너지 발전비용은 6.49달러로 나타났다. 이를 2020년 우리나라 총 화석연료 발전량(352,706GWh)을 기준으로 계산할 경우, 원자력 발전은 2.54억~5.26억 달러, 신재생에너지 발전은 22.89억 달러로 신재생에너지 발전이 원자력 발전보다 4.35~9.01배의 비용이 더 소요되는 것으로 분석되었다. 따라서 발전 부문의 온실가스 감축을 위해서는 원자력 발전이 신재생에너지 발전에 비해 높은 비용 효율성을 가지는 것을 알 수 있었다.

• 연구논문집
• /
• 통권31호
• /
• pp.45-51
• /
• 2001

One of emerging technologies under development in the advanced countries is considered as RDF(Refuse Derived Fuel) power generation, which could meet both the requirement of an alternative energy resource utilization and $CO_2$ reduction. This paper deals with the effect to the thermal effiency and CO2 reduction of RDF firing power generation. The statistical data of domestic MSW generation in last year in small and medium cities for evaluating the merits of the RDF power generation were used. The analysis for RDF power generation compared to the existing incinerator w/o(or w/) power generation shows around 20.6%(10.0%) up in the total thermal efficiency and 57.0%(31.4%) up in the $CO_2$ reduction respectively.

• 신재생에너지
• /
• 제16권4호
• /
• pp.9-22
• /
• 2020

This study analyzed the short- and long-term effects of nuclear and renewable energy generation on CO2 emissions in Korea, Japan, and Germany from 1987 to 2016 by using the unit root test, Johansen cointegration test, and ARDL model. The unit root test was performed, and the Johansen cointegration test showed cointegration relationships among variables. In the long run, in Germany, the generation of both nuclear and renewable energy was found to affect CO2 emission reduction, while South Korea's renewable energy generation, including hydropower, increased the emissions. Japan only showed significance in fossil fuels. In the short run, in the three countries, the generation of nuclear and renewable energy, excluding hydropower, affected CO2 emission. However, in Korea and Germany, nuclear and renewable energy generation, respectively, affected CO2 emission reduction. Although the rest are significant, the results showed that they increased CO2 emissions.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.51-57
• /
• 2003

The metal transfer in $CO_2$ welding shows the transition of transfer mode from short-circuiting to repelled transfer will the increase of welding current. While the short-circuiting mode in $CO_2$ welding has been studied very extensively relating with droplet formation and spatter generation, the repelled transfer has little been understood. In this study, high current $CO_2$ welding has been performed with bead-on-plate welds along with the waveform analyzer and high speed camera. The image of high speed camera was synchronized with its waveform so that the moment of spatter generation could be realized during drop detachment. As a results of this study, it was found that welding arc changes its location either once or three times and thus single or double pulse signals were developed in the voltage waveform. Whenever the arc moved its location, new arc was developed in a explosive way and thus it caused spatter generation. Specially severe spattering took place when the waveform showed a double-peak pattern. As a consequence of these results, new waveform control techniques could be suggested for suppressing the spatter generation in the high-current $CO_2$ welding.

• Journal of Welding and Joining
• /
• 제15권2호
• /
• pp.72-80
• /
• 1997

The spatter generation rate of GMA welding with $CO_2$ gas shielding was measured with the change of welding conditions such as wire feeding rate and welding voltage and then the results were analized with the accompanying changes in metal transfer mode and in bead geometry. The spatter generation rate (SGR) was relatively low not only wit the short circuit transfer but with the truely globular transfer mode. However, the SGR resulted with the mixed mode were consistantly high. The resultant wave pattern of mixed mode was due to the coexistance of short-circuit and globular transfer and characterized by the frequent appearance of instantaneous short circuit. Considering the result of SGR and that of bead geometry, it could be concluded that when the wire feeding rate (or welding current) was either low or high, the optimum bead shape could be obtained along with the low spatter generation. However, in the middle range of wire feeding rate, the optimum bead shape was only obtained in the mixed mode condition resulting in the high spatter generation.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.498-504
• /
• 2006

This paper describes the simple payback period analysis of small co-generation system based on the existing apartment and building data. First, We investigate apartment and building data more than $2000[m^2]$ using Ministry of Construction & Transportation's computer system. And then we calculate the latent amount of small co-generation system considering gas company and CHP. Second, we classify the latent amount of small co-generation system into office, hospital, hotel, department store, complex building and apartment. Finally, we perform the simple payback period analysis for small co-generation system. The results show the simple payback period of small co-generation system is less then 10 years.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.822-823
• /
• 2007

It is easily can be expected that Korea cannot be free under the regulation, because Korea is one of the major $CO_2$ emitter in the world. Even though Korea currently doesn't have any obligation to mitigate the carbon emission, power industry needs to study the effect of that. this paper aims to analyze the change of economic loading order for generation dispatch by various carbon price, looking at each plant's or generator's variable generation cost per unit electricity(kWh) that consists of basic generation price calculated by automatic generation system planning model, WASP 4.0, and $CO_2$ price per unit electricity generation.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.48-53
• /
• 2003

The object of this study is to examine the effect of short circuit time ratio (SCTR) and current rise delay time (Td) on the spatter generation at low and medium current range in $CO_2$ welding. The spatter was evaluated by the weight generated in the welding of bead-on-plate for 30 seconds (3 times). Td was varied by order of 0, 0.4, 0.8 and 1.2 msec. At each Td, the short circuit time ratio was varied by the output voltage of the welding power source. In the low current range, it was found that the optimum SCTR was 20~25%, and the minimum spatter generation weight was obtained in the case of Td=0.4msec and SCTR=22% even though the remarkable difference was not showed by the application of Td. In the medium current range, it was confirmed that the arc was stable though the SCTR was increased from 20% to 40% by the control of current wave. Spatter generation weight depended on the variation of Td, and the lowest value of spatter generation weight occurred at Td=0.8~1.2msec.