• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• KSBB Journal
• /
• v.7 no.2
• /
• pp.112-117
• /
• 1992

An optimal composition of medium for hyaluronic acid production and some characteristics of its from Streptococcus zooepidemicus were investigated. The hyaluronic acid from S. zooepidemicus was reached maximum level in the BY-medium containing 0.1% beef extract, 0.1% yeast extract, 3.0% glucose, 2.0% peptone, 0.1% NaCl and $0.5%CaCO_3$ (pH 7.5) at $37^{\circ}C$ for 36 hours with shaking. Addition of $CaCO_3$ to the medium was necessary to neulralize the lowered pH which was resulted from hyaluronic acid production. Molecular weights of extracelluar and cellular hyaluronic acid produced by the strain were $1-1.4{\times }10^6$ and $5{\times}10^6$, respectively. The amount of extracellular hyaluronic acid was 91.9% of total hyaluronic acid produced and the vest was all intracellular.

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.397-401
• /
• 2001

Blood gas values such as pO$_2$ were studied in common marmosets, crab-eating macaques and Japanese macaques, rhesus macaques and celebes macaque reared in Korea. Blood pH and blood gas values were evaluated in both arterial and venous blood. pH, p$CO_2$, and pO$_2$, of arterial blood in common marmosets were measured as 7.4$\pm$0.1, 29.2$\pm$3.6 mmHg and 81.5$\pm$8.9 mmHg, respectively. Corresponding values in one crab-eating macaque were 7.3, 41.3 mmHg and 46.5 mmHg, respectively. In case of venous blood, pH, p$CO_2$, and pO$_2$, in common marmosets were observed as 7.2$\pm$0.2, 64.9$\pm$18.3 mmHg and 23.5$\pm$5.4 mmHg, respectively. On the while, pH, p$CO_2$, and pO$_2$, of venous blood in crab-eating macaques showed 7.2$\pm$0.2, 49.9$\pm$8.0 mmHg and 38.3$\pm$8.8 mmHg, respectively. Venous pH, p$CO_2$, and pO$_2$, in Japanese macaques were 7.1$\pm$0.2, 56.4$\pm$5.3 mmHg and 40.1$\pm$9.3 mmHg, respectively. Those values in one rhesus macaque were 7.2, 61.1 mmHg and 24.9 mmHg, and in celebes macaque were 7.1, 54.3 mmHg and 31.8 mmHg, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.7
• /
• pp.571-576
• /
• 1994

The photoreactions of $ReH_5(Cyttp)\;(1)\;(Cyttp=PhP(CH_2CH_2CH_2PCy_2)_2)\;with\;CO,\;CO_2\;and\;PMe_3 has been investigated to find the differences in reactivities from those of trismonophosphine analog. Irradiation of 1 under CO, $CO_2$ and excess $PMe_3$ in benzene results in the formation of the complexes, $ReH(CO)_2(Cyttp)\;(2),\;ReH_2({\eta}^2-HCO_2)(Cyttp)\;(3)\;and\;$ReH_3(PMe_3)(Cyttp)$ (4), respectively. The resulting products suggest that photoreactions of $ReH_5(Cyttp)$ proceed by photoextrusion of $H_2$ giving a phototransient species "$ReH_3$(Cyttp)" which can be trapped by CO, $CO_2\;and\;PMe_3$. The structures of 2, 3 and 4 are inferred based on $^1H,\;^{31}P$ NMR and I. R spectroscopy.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.148-153
• /
• 1989

A strain of alkalophilic Bacillus sp. YC-335 has been isolated from soil. The strain was capable of producing large amount of cyclodextrin glycosyl transferase (CGTase) in the culture broth. The preferable medium composition has been determined to be as follows : 1.5% soluble starch, 5% corn steep liquor, 0.1% $K_2$HPO$_4$, 0.02%mgSO$_4$.7$H_2O$, 1% CaCO$_3$and 1% Na$_2$CO$_3$(pH 10.3). The highest enzyme production was observed after 48 hours of cultivation at 31$^{\circ}C$. The optimum pH and temperature for the activity of crude enzyme were 6.0 and 5$0^{\circ}C$, respectively. The enzyme was stable between pH 5 and 9, and upto 5$0^{\circ}C$. The enzyme converted starch into $\alpha$-, $\beta$- and ${\gamma}$-CD in the relative amounts of 1:10:1.5, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.332-334
• /
• 1991

The reaction and coordination chemistry of chiral ferrocenylaminophosphines such as 2-(diphenylphosphino)-1-(N,N-dimethylaminoethyl) ferrocene (PPFA), and 1',2-bis(diphenylphosphino)-l-(N,N-dimethylaminoe thyl) ferrocene (BPPFA), with various iron carbonyls have been investigated. PPFA reacted with iron carbonyls, Fe$(CO)_5$, $Fe_2(CO)_9$, or $Fe_3(CO)_{12}$ to give an iron complex of the type (${\eta}^1$-PPFA-P)Fe$(CO)_4$ (1) as a single product regardless the choice of the iron carbonyls. The bisphosphine ligand BPPFA afforded two products (${\eta}^1$-BPPFA-P)Fe$(CO)_4$ (2) and (${\mu}$,${\eta}^1$-BPPFA-P,P)$Fe_2(CO)_8$ (3) in which BPPFA acts as a monodentate and a bridging ligand, respectively. In all cases coordination to the -Fe$(CO)_4$ moiety is made through the phosphine rather than the amino group and, in the case of 2, the coordination is made through the phosphine substituted at the $C_5H_4$ ring to reduce the steric congestion.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.994-1001
• /
• 2012

The Effects of operating variables on reactivity of two $CO_2$ absorbents (PKM1-SU and P4-600) for SEWGS process were investigated in a pressurized fluidized bed reactor. For both $CO_2$ absorbents, $CO_2$ sorption capacity decreased as the number of absorption-regeneration cycles increased. PKM1-SU absorbent represented higher $CO_2$ sorption capacity than that of P4-600 absorbent. However, P4-600 absorbent represented better performance than PKM1-SU absorbent from the view points of regeneration temperature and regeneration rate. For PKM1-SU absorbent, $CO_2$ sorption capacity increased as the steam concentration increased. However, $CO_2$ sorption capacity increased initially as the steam concentration increased from 5% to 10%, but maintained thereafter for P4-600 absorbent. For both $CO_2$ absorbents, $CO_2$ sorption capacity increased as the final regeneration temperature increased. For PKM1-SU absorbent, $CO_2$ sorption capacity increased as the pressure increased and the increment tendency was drastic at higher pressure than 15 bar.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.523-538
• /
• 1997

In order to investigate TMD prevalence in malocclusion patients and to study its relationship with occlusal factors, 205 malocclusion patients (M67, F138, 6Y1M-46Y8M) were examined. The following examinations were carried out, Questionnaire personal history, TMD symptoms, and the associated factors Clinical examination : TMJ sound and maximum mouth opening Orthopantomogram : condyle abnormalities, length of Co'-Inc' and Co'-Go', ratio Co'- Inc'/ Co'-Go', and depth of antegonial notch Transcranial view limitation of anterior movement of condyle Model Angle classification, overjet, overbite, midline discrepancy, missing of posterior teeth, posterior crossbite, attrition of palatal cusp of maxillary molars, crowding/spacing The results could be summarized as follows, 1. The prevalence of TMD showed that Helkimo Anamestic Inder(Ai) 0 was $46.8\%$, Ai I was $22.0\%$, Ai II was $31.2\%$ and subjective symptoms increased with aging (p<0.001) and were frequent in females (p<0.05). 2. Flattening ($4.4\%$) was the most frequent condyle abnormality on Orthopantomogram, and $8.3\%$ of subjects showed some abnormalities on Orthopantomogram. 3. The cases with neck and shoulder pain (p<0.001), clenching, lip biting (p<0.01), and headache (p<0.05) showed higher scores of Ai. 4. Angle class II showed high frequency of condylar abnormalities on Orthopantomogram, and subjects whose palatal cusp of maxillary molars had been attrided had the tendency to show high hi scores (p<0.05). The other occlusal factors had nothing to do with the symptoms of TMD. 5. In the cases that 1)the value of Co'-Inc', Co'-Go' or Co'-Inc'/Co'-Go' were low or 2)the differences of Co'-Go' or Co'-Inc'/Co'-Go' between the right and the left were large, condylar abnormalities were frequently obserbed on Orthopantomogram.

• Korean Journal of Food Science and Technology
• /
• v.11 no.3
• /
• pp.188-191
• /
• 1979

The heat decomposition rate of guanosine-5'-monophosphate was investigated in pH range from 5.52 to 7.00, and 0.1 of the ionic strength. The result showed that the rate was a first-order reaction and the rate of guanosine-5'-monophosphate loss was maximum near $pKa_2$. The loss of guanosine-5'-monophosphate was temperature dependent and followed to the Arrhenius equation in the temperature region from $93^{\circ}C$ to $108^{\circ}C$. The rate constant as function of temperature ($93^{\circ}C$ to $108^{\circ}C$) and neutral pH($pKa_2$, 6.0, to 7.0) was correlated by least-square fit of the experimental data; $$K=4.19{\times}10^{26}\;{\exp}\;[-1.3(pH+E/RT)]$$

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.253-261
• /
• 2005

Catalytic wet oxidation of ppm levels of trichloroethylene (TCE) in water has been conducted using $TiO_2$-supported cobalt oxides at a given temperature and weight hourly space velocity. 5% $CoO_x/TiO_2$ might be the most promising catalyst for the wet oxidation at $36^{\circ}C$ although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Characterization of the $CoO_x$ catalyst by acquiring XPS spectra of both fresh and used Co surfaces gave different surface spectral features of each $CoO_x$. Co $2p_{3/2}$ binding energy of Co species exposed predominantly onto the outermost surface of the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $Co_2TiO_4$ and $CoTiO_3$. The spent catalyst possessed a 780.3 eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD measurements indicated that the phase structure of Co species in 5% $CoO_x/TiO_2$ catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.