• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.1
• /
• pp.1-14
• /
• 2017

The safety analysis of an earthquake is carried out during the operation of a subsea pipeline and an onshore pipeline. Several cases are proposed for consideration. In the case of a buried pipeline, permanent ground deformation by the earthquake and an increase of internal pressure by the acceleration of the earthquake should be considered. In the case of a subsea pipeline, a bending moment is caused by liquefaction of the backfill material on a trenched seabed, etc., which results in a high bending moment of the buried pipeline. The bending moment causes the collapse of the subsea pipeline or a leak of crude oil or gas, which results in economic loss due to enormous environmental contamination and social economic loss owing to operation functional failure. Thus, in order to prevent economic loss and operation loss, structurally sensitive design with regard to seismic characteristics must be performed in the buried pipeline in advance, and the negative impact on the buried pipeline must be minimized by conducting a thorough analysis on the seabed and backfilling material selection. Moreover, it is proposed to consider the selection of material properties for the buried pipeline. A more economical review is also required for detailed study.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.48-52
• /
• 2008

According to extremely industrial growth, gas facilities, equipments and chemical plants are gradually increased due to incremental demands of annual amount of gases. The safety management of gases, however, is still far from their requirements. Methane, the principal ingredient of natural gas, is inflammable and explosive and is much used in factories and houses. Therefore, these gas safety management is essential. So, we, with a program of the gas safety management, hope to develop the detection system of methane gas leak using mid-infrared ray LED and PD with $3.2\;{\mu}m$. The cryogenic cooling device is indispensible at laser but needless at LED driven on the room temperature if manufacturing optical sensor with $3.2\;{\mu}m$. It, consequently, is not only possible to implement for subminiature and portable type but also able to speedily detect methane of extremely small quantities because the $CH_4$ absorption intensity at $3.2\;{\mu}m$ is stronger than that at $1.67\;{\mu}m$. Our objective of research is to prevent gas leak accidents from occurring previously and to minimize the extent of damage from them.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.40-40
• /
• 2010

사중극 질량 분석기(Quadrupole Mass Spectrometer, QMS)는 높은 정확도와 사용이 쉬운 장점으로 인해 반도체 및 디스플레이 산업 등의 진공공정에서 잔류가스를 측정하고 분석하는 기기로써 반도체 및 디스플레이 소자제조를 위한 공정 진단에서 많이 사용되고 있다. 특히 고진공으로 내려가면서 리크 디텍션(leak detection)과 미세 량의 잔류기체 감지가 더욱더 요구되며 특히 $H_2$ 및 CO의 경우 측정에 많은 어려움이 있다. 따라서 $H_2$ 및 CO의 미세 량을 감지하기 위하여 QMS의 성능을 평가할 수 있는 parameter 중 하나가 될 수 있는 minimum detectable partial pressure(MDPP)를 측정하였다. 실제 고진공에 도달하여 MDPP를 계산하기 위해서는 bake out이 필요하며 또한 가스가 주입되지 않은 상태에서 잔류기체의 조성을 정확히 알 수 없기 때문에 정량적 분석이 어렵다는 단점이 있다. 본 실험에서는 측정하고자 하는 물질의 소량 포함된 표준가스를 사용하여 부피확장방법으로 가스 챔버로 희석하여 이동시키고 핀홀에서 가스유량을 더 줄여서 QMS가 기체를 감지하는 압력범위를 유지하면서 가스를 인가하여 주어 그때의 MDPP를 계산하였다. 또한 tuning을 통해 이온전류를 증폭시켜 더 향상된 MDPP를 측정하였다. 이 방법을 사용하면 bake out을 통한 고진공에 도달하지 않고서도 MDPP를 측정할 수 있으며, 정확한 조성 및 부분압을 알 수 있고 또한 희석된 가스를 사용하여 MDPP를 더욱 더 향상시킬 수 있다.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.99-104
• /
• 2011

An ILRT Interval for a nuclear power plant in Korea was extended from once in five years to once in ten years. Therefore, it is necessary to evaluate risk impact for ILRT interval extensions. In this paper, input data were generated for the reference plants, KSNP, using raw data such as meteorological data, population distribution data and source term data. And, using MACCS II code the risk impact assessment was performed based on the two methodologies of NUREG-1493 and NEI Interim Report. The risk impact derived from an ILRT interval extension was identified not to be significant. It is considered to apply this study and results to making an accident management plan and safety goal, and to the field of public acceptance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.182-182
• /
• 1999

The chemisorption effect of CO on the Ni/Cu(001) surface was investigated using LEED(Low Energy Electron Diffraction) and EELS(Electron Energy Loss Spectrscopy0 under the UHV conditions. after mounting the Cu(001) single crystal in the UHV chamber (base pressure 1$\times$10-10Torr), a clean surface was obtained after a few cycles of repeated Ar+ ion sputtering and annealing at about 40$0^{\circ}C$. The epitaxial thin Ni films were formed on the Cu(001) by evaporation from 99.999% Ni block. The pseudomorphic growth and the orderness of the thin Ni films were monitored by c(2$^{\circ}C$2) LEED pattern. CO adlayers on Ni epitaxial thin films were prepared by dosing pure CO has through a leak valve. After CO adsorpton at room temperature, two pairs of peaks were observed by EELS, whose relative intensities are changed as the film thickness is varied and time is elapsed. These two pair of peaks are likely related to different bonding sites (-top and bridge sites) of C-Ni as well as C-O vibration. Experimental results and qualitative interpretation of the spectra wille be discussed. The possibility of using EELS in combination with probe species (CO) to investigate the nature of thin film growth is mentioned. We will report the experimental result of O2 dosage on Ni film and interaction of CO and O2.

• Analytical Science and Technology
• /
• v.35 no.2
• /
• pp.69-81
• /
• 2022

The method of measuring and classifying the energy category of neutrons directly using raw data acquired through a CZT detector is not satisfactory, in terms of accuracy and efficiency, because of its poor energy resolution and low measurement efficiency. Moreover, this method of measuring and analyzing the characteristics of low-energy or low-activity gamma-ray sources might be not accurate and efficient in the case of neutrons because of various factors, such as the noise of the CZT detector itself and the influence of environmental radiation. We have therefore developed an efficient method of analyzing radiation characteristics using a neutron and gamma-ray analysis algorithm for the rapid and clear identification of the type, energy, and radioactivity of gamma-ray sources as well as the detection and classification of the energy category (fast or thermal neutrons) of neutron sources, employing raw data acquired through a CZT detector. The neutron analysis algorithm is based on the fact that in the energy-spectrum channel of 558.6 keV emitted in the nuclear reaction ¹¹³Cd + ¹n → ¹¹⁴Cd + in the CZT detector, there is a notable difference in detection information between a CZT detector without a PE modulator and a CZT detector with a PE modulator, but there is no significant difference between the two detectors in other energy-spectrum channels. In addition, the gamma-ray analysis algorithm uses the difference in the detection information of the CZT detector between the unique characteristic energy-spectrum channel of a gamma-ray source and other channels. This efficient method of analyzing radiation characteristics is expected to be useful for the rapid radiation detection and accurate information collection on radiation sources, which are required to minimize radiation damage and manage accidents in national disaster situations, such as large-scale radioactivity leak accidents at nuclear power plants or nuclear material handling facilities.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.44-49
• /
• 2020

In this paper, a measuring circuit is designed through analyzing manufacture specification of the sensor based on MOS. And the best input-output polynomial are induced that really gas sensors are used in gas safety management industrial fields. Response characteristics of a MOS gas sensor is analysed by through sensor's output voltages are measured after standard gases with six kinds of concentrations are manufactured and are injected to the sensor. A lookup table is created by relations of sensor's output voltages by injecting gases with other concentrations. Because data of the formed lookup table are equal interval, a polynomial can be induced of method of approximation function. So the 5th polynomial of input-output for a sensor is defined, coefficients are calculated by using least squares method, and the 5th polynomial is completed for representing characteristics of the sensor. If the proposed polynomial is applied to gas leak detectors, an inverse transformation of polynomial and programing of array codes are recreated. In this research, polynomial is implemented with array types that intervals of values of a lookup table are one-fifth sampled and interpolated. The performance of proposed 5th calibration equation is verified that errors are reduced than a linear expression when tests are performed by measurement of concentrations against injection of standard gases.

• Neonatal Medicine
• /
• v.17 no.1
• /
• pp.34-43
• /
• 2010

Purpose : The aim of this study was to examine whether hypercapnia during the first seven days of life was associated with severe intraventricular hemorrhage (IVH) in preterm infants requiring mechanical ventilation. Methods : A matched pair analysis was performed for 19 preterm infants with severe IVH(grade$\geq$3) and 38 infants with no severe IVH (normal or grade 1), who required mechanical ventilation for more than seven days. The univariate and multivariate analysis of severe IVH with maximal and minimal $PaCO_2$, averag $PaCO_2$, SD of $PaCO_2$, and difference in the $PaCO_2$ were assessed. The major perinatal factors and maximal ventilator index (VI) were also compared. Results : Infants with severe IVH had a higher maximal $PaCO_2$ (86.1$\pm$18.4 mmHg vs. 60.1$\pm$ 11.6 mmHg, P <0.001) and mean $PaCO_2$ (47.5$\pm$5.6 mmHg vs. 41.2$\pm$6.3 mmHg, P=0.004) and a larger SD or difference in $PaCO_2$ (14.0$\pm$4.4 mmHg vs. 9.0$\pm$2.4 mmHg; 60.3$\pm$20.9 mmHg vs. 35.5$\pm$11.8 mmHg, P <0.001). However the minimal $PaCO_2$ values did not differ between the groups. Disseminated intravascular coagulation, pulmonary hemorrhage, and the air leak syndrome were more frequent in the IVH group than in the controls. The maximal VI on each day was higher in the IVH group. The multivariate logistic regression analysis after controlling for bleeding tendency showed that the air leak syndrome, maximal VI, and maximal $PaCO_2$ were independently associated with severe IVH [OR, 1.324 (95% CI, 1.011-1.733; P=0.041)]. Conclusion : Extreme hypercapnia was significantly associated with severe IVH in preterm infants, after adjustment for major perinatal risk factors. Frequent monitoring of the $PaCO_2$ may be important for early detection of inadvertent hypercapnia and prompt correction of high PaCOS levels.

• Journal of Gastric Cancer
• /
• v.21 no.1
• /
• pp.16-29
• /
• 2021

Purpose: Incidence, risk factors, and clinical consequences of pancreatic fistula (POPF) after D1+/D2 radical gastrectomy have not been well investigated in Western patients, particularly those from Eastern Europe. Materials and Methods: A total of 358 D1+/D2 radical gastrectomies were performed by surgeons with high caseloads in a single surgical center from 2002 to 2017. A retrospective analysis of data that were prospectively gathered in an electronic database was performed. POPF was defined and graded according to the International Study Group for Pancreatic Surgery (ISGPS) criteria. Uni- and multivariate analyses were performed to identify potential predictors of POPF. Additionally, the impact of POPF on early complications and long-term outcomes were investigated. Results: POPF was observed in 20 patients (5.6%), according to the updated ISGPS grading system. Cardiovascular comorbidities emerged as the single independent predictor of POPF formation (risk ratio, 3.051; 95% confidence interval, 1.161-8.019; P=0.024). POPF occurrence was associated with statistically significant increased rates of postoperative hemorrhage requiring re-laparotomy (P=0.029), anastomotic leak (P=0.002), 90-day mortality (P=0.036), and prolonged hospital stay (P<0.001). The long-term survival of patients with gastric adenocarcinoma was not affected by POPF (P=0.661). Conclusions: In this large series of Eastern European patients, the clinically relevant rate of POPF after D1+/D2 radical gastrectomy was low. The presence of co-existing cardiovascular disease favored the occurrence of POPF and was associated with an increased risk of postoperative bleeding, anastomotic leak, 90-day mortality, and prolonged hospital stay. POPF was not found to affect the long-term survival of patients with gastric adenocarcinoma.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.3
• /
• pp.329-334
• /
• 2011

The cooling water circulation plates had been used to drop the temperature of refractory outside shell of common cooling system by using cooling plate or stave type. When they are attacked by surrounding gas, they are corroded and the water flows in the refractory due to leakage of water. So, the life of refractory material is shortened and changed due to the worse conditions of cooling system. The automatic sensing device for water leakage of cooling plate is developed to check the position of trouble by using the microprocessor system when cooling water leak and gas are flowed into the cooling plate through the leakage position. The flowed gas is detected in the micro-process system which delivers the detected position of cooling plate or stave to main control room through the wireless-radio relay station. This system can be possible to detect the position of cooling plate or stave against the water leakage part immediately and then deliver the signal to main control room by using the microprocessor system and wireless-radio relay station. This system will be developed in changing the working condition from manual system to unmanned auto alarm system.