• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.83-88
• /
• 2000

In machining large screws such as those of extruders, it takes long time to machine them on conventional machines which usually use single-tipped fixed tools. And it is also difficult to use an existing CAD/CAM coftware when trying to get over the problems of conventional machines and making use of CNC machines. In this paper, generation of machining program using rotational tools for large screws defined by longitudinal-section profile is descrebed. Use of rotational tools in machining plays an important role in saving machining time. In the sort of extruder screws, it is easy to define a screw shape by longitudinal-section profile, and by which improvement of dimensional accuracy can be expected. The CAM software developed in this paper is based on user's and designer's friendliness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.605-609
• /
• 1996

Continuous sliding mode control is applied to turning process for cutting force regulation. The highest feedrate compatible with the allowable cutting force is applied in rough cutting process such that maximum productivity is ensured and tool breakage is avoided. The programmed feedrate is overridden after the control algorithm is carried out. However, most CNC lathe manufacturers offer limited number of data bits far feedrate override, thus resulting in nonlinear behavior of the machine tools. Such nonlinearity brings “quantized” effect, and the optimal faedrate is rounded off before being fed into the CNC system. To compensate for this problem, continuous sliding mode control is applied. Conventional switching control law at a sliding surface is replaced by a smooth control interpolation in a selected boundary layer to avoid the excitation of high-frequency dynamics. Simulation results are presented in comparison with those obtained by applying adaptive control.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.87-90
• /
• 2007

To manufacture the lens mold used in producing polycarbonate (PC) lenses, the core manufacturing is needed and this core manufacturing is generally performed by diamond turning machine (DTM) or computer numerical control (CNC) lathe. The numerical data about the lens core feature is necessarily needed for operating of these devices. Therefore, we developed the program which calculate the numerical data about the lens core feature. The program was composed to be able to input aspherical coefficients of lens feature, display the graph of lens feature, and save the numerical data file.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2205-2212
• /
• 2005

In this paper, the cutting torque of a CNC machine tool during machining is monitored through the internet. To estimate the cutting torque precisely, the spindle driving system is divided into two parts: electrical induction motor part and mechanical part. A magnetized current is calculated from the measured three-phase stator currents and used for the total torque estimation generated by a spindle motor. Slip angular velocity is calculated from the magnetized current directly, which gets rid of the necessity of a spindle speed sensor. Since the frictional torque changes according to the cutting torque and the spindle rotational speed, an experiment is adopted to obtain the frictional torque as a function of the cutting torque and the spindle rotation speed. Then the cutting torque can be calculated by solving a $2^{nd}$ order difference equation at a given cutting condition. A graphical programming method is used to implement the torque monitoring system developed in this study to the computer and at the same time monitor the torque of the spindle motor in real time through the internet. The cutting torque of the CNC lathe is estimated well within an about $3\%$ error range in average in various cutting conditions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.747-754
• /
• 2013

This study introduces a recently designed desktop-sized NC turning system and its components. This machine is designed for the ultra-precise turning of parts with a diameter of 0.5-20 mm with minimum space usage for the machine. This study aims to achieve submicron-level accuracy of movements and good rigidity of the machine for precision machining using the desktop-sized machine. The components such as the main machine structure, air bearing servo spindle, and XZ stage with needle roller guides are designed, and the designed machine is built with a PC-based CNC controller. Its static and dynamic stiffness performances and positioning resolutions are tested. Through machining tests with single-crystal diamond tools, a form error less than $0.8{\mu}m$ and surface roughness (Ra) of $0.03{\mu}m$ for workpieces are obtained.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.25-30
• /
• 2003

In metal cutting chatter is the unstable cutting phenomenon which caused by the interaction between the dynamics of the chip removal process and the structural dynamics of machine tool. When the vibration and chatter on, it reduces tool life and results in poor surface roughness and low productivity of the machining process. In order to observe the effect of chatter on the turned surface, the surface simulation model based on the surface-shaping system are developed under the ideal condition and the occurrence of the regenerative chatter, and it is compared with experiment of profile. In this study, the experiments were conducted in a CNC lathe without cutting fluid to investigate the phenomenon of the chatter.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.19-25
• /
• 2001

In metal cutting, chatter is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. When chatter occurs, it reduces tool life and results in poor surface roughness and low productivity of the machining process. In this study, the experiments have been conducted to investigate phenomenon of the chatter in CNC lathe without cutting fluid. In the experiments, two accelerometers were attached at the tail stock and tool holder and the signals were caught. In order to observe the effect of chatter on the surface roughness profiles, surface roughness profiles were generated under the ideal condition and the occurrence of the chatter based on the surface simulation model using surface-shaping system. Finally, the result of experiment and simulation have been compared.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.11-15
• /
• 1999

Monitoring of the cutting force signals in cutting process has been well emphasized in machine tool communities. Although the cutting force can be directly measured by a tool dynamometer, this method is not always feasible because of high cost and limitations in setup. In this paper an indirect cutting force monitoring system is developed so that the cutting force in turning process is estimated based on a AC spindle drive model. This monitoring system considers the cutting force as a disturbance input to the spindle drive and estimates the cutting force based on the inverse dynamic model. The inverse dynamic model represents the dynamic relation between the cutting force, the motor torque and the motor power. The proposed monitoring system is realized on a CNC lathe and its estimation performance is evaluated experimentally.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.174-179
• /
• 2002

In metal cutting, Chatter is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. when vibration and chatter occurs, it reduces tool life, results in poor surface roughness and low productivity of the machining process. In this study, the experiments were conducted in CNC lathe without cutting fluid to investigated phenomenon of the chatter, In the experiments, accelerometers were set up at the tail stock and tool holder and the signals were picked up. In order to observe the effect of chatter on the surface roughness profiles, in this paper, surface roughness profiles will be generated under the ideal condition and the occurrence of the chatter based on the surface simulation model.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.5-17
• /
• 1995

기계가공(Machining)중에서 가장 기본적인 것이 선삭(Turning)작업이며, 이 가공은 선반(Lathe)에 의해서 행하여지고 있는 것은 다 아는 사실이다. 공작기계의 발달과 금속 절삭 원리(Principles of metal cutting)는 선반을 중심으로 약 일세기동안 꾸준히 발전해 오고 있으며, 수없이 쏟아져 나온 연구논문들의 대부분이 선반에 의한 가공과 그 공작기계에 의해서 이루어졌으며 앞으로도 계속 보통선반, CNC선반의 토대 위에서 이루어지리라고 보고 있다. 공작기계 중에서 CNC 선반의 발달 과정을 요약해보면 1960년대의 대량 생산시대에는 Programmable control 방식의 자동 터렛트(Turret) 선반이 개발되어 생산 공정이 비교적 간단한 양산 가공기로서 환영을 받게 되었다. 1970년대에 들어서면서 다품종소량생산이 중요시되었고, 그때 NC 선반시대가 시작되었다고 볼 수 있다. 현 싯점에서 볼 때 이것은 중품종중량생산 이라고 말할 수 있으며, Turret 선반의 NC화 즉, Multi-tool에 의한 선반의 복합가공이 가능해졌지만 Tooling에 문제가 발생하였다. 1980년에 들어서 각종 MC 들이 광범위하게 발달, 보급되는 경향에 따라서 NC 선반도 고능률화의 일환으로 고속화와 더불어 회전공구인 End mill. Drill. Tap 등의 복합가공이 가능한 복합선반이 차례로 개발되었고 선삭공구와 회전공구등의 자동공구교환(Automatic Tool. Changing. ATC)이 가능해지고 Y축 보정(Co-mpensation)기구를 부착한 대형 Turning center가 개발되어 보급되게 되었다.