• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.12-13
• /
• 2020

Free-form buildings usually have large curved shapes on the outside. In order to construct this curved shape, the exterior of the building must be divided into easy-to-manufacture shapes, and the segmented panel is called the FCP(Free-form Concrete Panel). These FCPs have different shapes and cannot reuse molds. To solve these problems, the researchers developed FCP manufacturing equipment to manufacture a mould of FCP. However, the developed equipment alone cannot completely manufacture FCP's mould. This is because there is no mould to implement side of FCP. Therefore, it is necessary to develop a side form of FCP that can be applied to FCP manufacturing equipment. To this end, this study analyzes the basic requirements that side mould should have before developing side mould.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.19-29
• /
• 1995

The basic technology for a production system represented by design, machining, assembly, and inspection, is machining technology such as CNC machine tools. etc. Direct Numerical Control, that effeciently manages NC programs is developing into Distributed Numerical Control that increases the utilization of the machining cell. It has the ability of monitoring and control, in real time, for CNC and periperial equipment. In this study, we develop a Distributed Numerical Control system that has real time and multitasking operation capability for the machining cell with various CNC's. With the consideration of economy, generalization and extension, the system is interfaced with CNC machine tools and periperial device using RS-485 network and RS-232C communication methods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.80-85
• /
• 2021

This study is to evaluate the structural stability of heavy duty structure of the Complex CNC automatic lathe. The analysis conditions were analyzed by applying the weight and load of the part itself and then applying the weight of the upper assembly unit. As a result of the structural analysis, the values of stress and strain are small and safety factor is high, and as a result of the dynamic analysis, there will be no resonance outside the equipment driving area, so there will be no problem in equipment stability.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.12
• /
• pp.297-304
• /
• 2019

The technological advances such as communication, sensor, and artificial intelligence lead smart factory construction. Smart factory aims at efficient process control by utilizing data from the existing automation process and intelligence technology such as machine learning. As a result of constructing smart factory, productivity increases, but costs increase. Therefore, small companies try to make a step-by-step transition from existing process to smart factory. In this paper, we have proposed a remote control system that support data collection, monitoring, and control for manufacturing equipment to support the construction of CNC cutting machine based small-scale smart factory. We have proposed the structure and design of the proposed system and efficient sensing data transmission scheme. To check the feasibility, the system was implemented for CNC cutting machine and functionality verification was performed. For performance evaluation, the web page access time was measured. The results means that the implemented system is available level.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1907-1910
• /
• 2003

Miniaturized machine tool can be used to produce 3D features based on CNC and PC-NC technology in the micro/meso scale. Wide applications of CNC technology are developed and there are lots of know-hows in the cutting process and their CNC application. It helps micro/meso scale structure to machine components, which can be used directly for practical applications. In the present research, as the machine tool is miniaturized, the manufacturing machine tools costs less when compared to the equipment used in other micromachining technologies. Moreover, with advancement of micro tool technology, the cutting process can be used to produce micro/meso scale parts. In conclusion, the proposed system can reduce the cost by utilizing the current machining technology, and as a result, complex micro/meso parts can be produced efficiently with high productivity.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.605-613
• /
• 2023

The multi-axis combined machining technology has enabled combined machining, which was difficult. However, the reality is that manufacturing costs are rising due to expensive equipment and there is a shortage of machine operation engineers. The purpose of this research is to present the optimum cutting conditions for the surface roughness when processing the inner diameter of SUS440C, which is an egg material, using a CNC automatic lathe. As a result of measuring the surface roughness, dry machining was the best at R_a0.481㎛ at a spindle speed of 4,000rpm, a feed rate of 0.05rev/min, and a cutting depth of 0.3mm. In wet machining, the highest value was R_a0.317 at a spindle speed of 2,000 rpm, a feed rate of 0.05 rev/min, and a cutting depth of 0.2 mm. The lower the feed rate, the better surface roughness appears. It was found that the feed rate had more influence than the number of revolutions and depth of cut.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1173-1182
• /
• 2001

Recent noticeable advances of CNC machine tools have considerably improved productivity and precision in manufacturing processes. However, in the respect of productivity some defects still remain because selection of machining conditions entirely depends on the experiences of programmers. Usually, machining conditions such as feed rate and spindle speed have been selected conservatively by considering the worst cases, and it has brought the loss of machining efficiency. Thus, the improvement of cutting force controller has been done to regulate cutting force constantly and to maximize feedrate simultaneously in case that machining conditions change variously. In this study, sliding mode control with boundary layer is applied to milling process for cutting force regulation and in a commercial CNC machining center data transfer between PC and PMC (programmable machine controller) of CNC machine is done using a standard interface method. And in the cutting force measurement, an indirect cutting force measuring system using current signal of AC servo is adopted in order not to use high-priced equipment like tool dynamometer. The purpose of this study is to maximize the productivity in milling process, thus its results can be applied to cases such as rough cutting process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.906-907
• /
• 2014

금형이나 부품절삭가공 등에 사용하고 있는 공작기계(밀링, 선반)는 Gcode라는 좌표값에 따라 공작기계를 동작시킨다. 공작기계가 많을 경우에는 휴대용 데이터 캐리어(data carrier) 이용하여 각각의 공작기계에 Gcode 데이터를 다운로딩 하고 있다. 현재에는 이러한 불편함을 해소하기 위하여 고가의 최신기술을 도입한 UTP, Wi-Fi, USB, CF 등을 기반으로 Gcode 데이터를 전송하는 시스템을 개발하고 있지만, 과거에 구입한 구형장비의 경우에는 RS-232를 사용하고 있어 데이터 전송이 불편함이 있다. 본 논문에서는 ATmega128을 활용하여 WGTE(Wireless Gcode Transfer Equipment)를 개발하여 시중에 상용화 되고 있는 고가의 장비를 대신할 수 있는 블루투스(bluetooth) 기반의 WGTE를 개발하고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.31-37
• /
• 2011

For the domestic glasses industry to procure competitiveness in the world CA(Cellulose Acetate) frame of spectacles market, CNC machining system for CA frame including high-value added CA cutting technologies should be developed with new materials for the rim based on Cellulose and sheet manufacturing base. The spindle system of glasses frame equipment that is the core to the quality of CA frame is the key technologies to realize high-speed, high-precision so its importance is remarkably emerging. In the study, at the structural design of the high spindle system of the private equipment for CA glasses frame embedded a motor of 40,000rpm, the stability of design was analyzed and investigated through selecting lubrication structure and thermal characteristics of the spindle system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.79-87
• /
• 2002

An attempt to automate the surface finishing process of the die and mould has been carried out. An UMB(Ultrasonic Micro Burnishing) equipment which brought the micro plastic cold deformation to the 3D sculptured surface of mold and dies by ultrasonic vibration and static load, was developed and installed at the head stock of a vertical machining center. To be satisfied with the required surface roughness and hardness, the DB based program was also developed and applied. This equipment composes of UMB equipement, CNC vertical machining center, CAD/CAM system and the DB based program fer optimal condition. UMB processing effect was obtained from initial value Ral.25 and Hk337 to Ra0.085 and Hk521 and similar result was shown in industrial mould application.