• 천문학회지
• /
• 제42권3호
• /
• pp.55-60
• /
• 2009

The properties of SOHO/LASCO CMEs are subjected to projection effects. Their dependence on the source position is important to be studied. Our main aim is to study the dependence of CME properties on helio-longitude and latitude using the CMEs associated with type IIs observed by Wind/WAVES spacecraft (Deca-hecta metric type IIs - DH type IIs). These CMEs were identified as a separate population of geo-effective CMEs. We considered the CMEs associated with the Wind/WAVE type IIs observed during the period January 1997 - December 2005. The source locations of these CMEs were identified using their associated GOES X-ray flares and listed online. Using their locations and the cataloged properties of CMEs, we carried out a study on the dependence of CME properties on source location. We studied the above for three groups of CMEs: (i) all CMEs, (ii) halo and non-halo CMEs, and (iii) limb and non-limb CMEs. Major results from this study can be summarized as follows. (i) There is a clear dependence of speed on both the longitude and latitude; while there is an increasing trend with respect to longitude, it is opposite in the case of latitude. Our investigations show that the longitudinal dependence is caused by the projection effect and the latitudinal effect by the solar cycle effect. (ii) In the case of width, the disc centered events are observed with more width than those occurred at higher longitudes, and this result seems to be the same for latitude. (iii) The dependency of speed is confirmed on the angular distance between the sun-center and source location determined using both the longitude and latitude. (iv) There is no dependency found in the case of acceleration. (v) Among all the three groups of CMEs, the speeds of halo CMEs show more dependency on longitude. The speed of non-halo and non-limb CMEs show more dependency on latitude. The above results may be taken into account in correcting the projection effects of geo-effective CMEs.

• 천문학회보
• /
• 제37권2호
• /
• pp.132.2-132.2
• /
• 2012

We have investigated the characteristics of magnetic cloud (MC) and ejecta (EJ) associated coronal mass ejections (CMEs) based on the assumption that all CMEs have a flux rope structure. For this, we used 54 CMEs and their interplanetary counter parts (interplanetary CMEs: ICMEs) that constitute the list of events used by the NASA/LWS Coordinated Data Analysis Workshop (CDAW) on CME flux ropes. We considered the location, angular width, and speed as well as the direction parameter, D. The direction parameter quantifies the degree of asymmetry of the CME shape, and shows how closely the CME propagation is directed to Earth. For the 54 CDAW events, we found several properties of the CMEs as follows: (1) the average value of D for the 23 MCs (0.62) is larger than that for the 31 EJs (0.49), which indicates that the MC-associated CMEs propagate more directly to the Earth than the EJ-associated CMEs; (2) comparison between the direction parameter and the source location shows that the majority of the MC-associated CMEs are ejected along the radial direction, while many of the EJ-associated CMEs are ejected non-radially; (3) the mean speed of MC-associated CMEs (946 km/s) is faster than that of EJ-associated CMEs (771 km/s). For seven very fast CMEs (>1500 km/s), all CMEs with large D (>0.4) are associated with MCs and the CMEs with small D are associated with EJs. From the statistical analysis of CME parameters, we found the superiority of the direction parameter. Based on these results, we suggest that the CME trajectory essentially decides the observed ICME structure.

• 천문학회지
• /
• 제39권4호
• /
• pp.139-145
• /
• 2006

We have made a comprehensive statistical study on the coronal mass ejections(CMEs) associated with helmet streamers. A total number of 3810 CMEs observed by SOHO/LASCO coronagraph from 1996 to 2000 have been visually inspected. By comparing their LASCO images and running difference images, we picked out streamer-associated CMEs, which are classified into two sub-groups: Class-A events whose morphological shape seen in the LASCO running difference image is quite similar to that of the pre-existing streamer, and Class-B events whose ejections occurred in a part of the streamer. The former type of CME may be caused by the destabilization of the helmet streamer and the latter type of CME may be related to the eruption of a filament underlying the helmet streamer or narrow CMEs such as streamer puffs. We have examined the distributions of CME speed and acceleration for both classes as well as the correlation between their speed and acceleration. The major results from these investigations are as follows. First, about a quarter of all CMEs are streamer-associated CMEs. Second, their mean speed is 413 km $s^{-1}$ for Class-A events and 371 km $s^{-1}$ for Class-B events. And the fraction of the streamer-associated CMEs decreases with speed. Third, the speed-acceleration diagrams show that there are no correlations between two quantities for both classes and the accelerations are nearly symmetric with respect to zero acceleration line. Fourth, their mean angular width are about $60^{\circ}$, which is similar to that of normal CMEs. Fifth, the fraction of streamer-associated CMEs during the solar minimum is a little larger than that during the solar maximum. Our results show that the kinematic characteristics of streamer-associated CMEs, especially Class-A events, are quite similar to those of quiescent filament-associated CMEs.

• 천문학회보
• /
• 제40권1호
• /
• pp.65.3-66
• /
• 2015

The determination of three dimensional parameters (e.g., radial speed, angular width, source location) of Coronal Mass Ejections (CMEs) is very important for space weather forecast. To estimate these parameters, several cone models based on a flat cone or a shallow ice-cream cone with spherical front have been suggested. In this study, we investigate which cone model is proper for halo CME morphology using 33 CMEs which are identified as halo CMEs by one spacecraft (SOHO or STEREO-A or B) and as limb CMEs by the other ones. From geometrical parameters of these CMEs such as their front curvature, we find that near full ice-cream cone CMEs (28 events) are dominant over shallow ice-cream cone CMEs (5 events). So we develop a new full ice-cream cone model by assuming that a full ice-cream cone consists of many flat cones with different heights and angular widths. This model is carried out by the following steps: (1) construct a cone for given height and angular width, (2) project the cone onto the sky plane, (3) select points comprising the outer boundary, (4) minimize the difference between the estimated projection points with the observed ones. We apply this model to several halo CMEs and compare the results with those from other methods such as a Graduated Cylindrical Shell model and a geometrical triangulation method.

• 천문학회보
• /
• 제41권1호
• /
• pp.47.1-47.1
• /
• 2016

The determination of three dimensional parameters (e.g., radial speed, angular width, source location) of Coronal Mass Ejections (CMEs) is very important for space weather forecast. To estimate these parameters, several cone models based on a flat cone or a shallow ice-cream cone with spherical front have been suggested. In this study, we investigate which cone model is proper for halo CME morphology using 26 CMEs which are identified as halo CMEs by one spacecraft (SOHO or STEREO-A or B) and as limb CMEs by the other ones. From geometrical parameters of these CMEs such as their front curvature, we find that near full ice-cream cone CMEs are dominant over shallow ice-cream cone CMEs. Thus we develop a new full ice-cream cone model by assuming that a full ice-cream cone consists of many flat cones with different heights and angular widths. This model is carried out by the following steps: (1) construct a cone for given height and angular width, (2) project the cone onto the sky plane, (3) select points comprising the outer boundary, (4) minimize the difference between the estimated projection speeds with the observed ones. We apply this model to 12 SOHO halo CMEs and compare the results with those from other stereoscopic methods (a geometrical triangulation method and a Graduated Cylindrical Shell model) based on multi-spacecraft data.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.9-24
• /
• 2009

태양주기 23의 태양흑점과 코로나질량방출(Coronal Mass Ejection, CME), 지자기폭풍과의 상호 연관성을 알아보기 위해 CME의 연도별 발생빈도 분포와 북-남 비대칭 분포, 태양흑점수와 면적의 연평균 분포와 북-남 비대칭 분포, 지자기폭풍의 연도별 발생빈도 분포와의 상호 상관관계를 알아보았다. 1996년부터 2007년까지의 SOHO/LASCO 목록 CME의 위치정보를 이용하여 북쪽 반구에서 발생한 CME와 남쪽 반구에서 발생한 CME의 연도별 발생빈도 분포를 알아내었다. 태양흑점수와 면적을 북쪽 반구와 남쪽 반구를 구분하여 그 연평균 분포를 구하였고 지자기 교란정도를 알 수 있는 Ap지수, Dst지수, aa지수를 이용하여 지자기폭풍의 연도별 발생빈도 분포를 구하였다. 이렇게 구한 각각의 분포간의 상호 상관관계를 구하였다. 또한 CME를 각 너비(Angular Width)와 속도(Linear Speed)에 따라 분류하여 흑점 분포, 지자기폭풍의 발생빈도 분포와 상관관계도 알아보았다. 그 결과 CME의 전체 발생빈도는 흑점수와 면적의 전체 분포와의 상관관계가 높았고 흑점수와 면적의 북-남 비대칭 분포와는 상관관계가 낮았다. CME의 북-남 비대칭 분포는 흑점의 북-남 비대칭 분포와 상관관계가 높았다. CME와 지자기폭풍 발생빈도 분포와의 상관관계를 살펴 본 결과 CME 전체나 북-남 비대칭 분포와는 상관도가 낮게 나왔다. 그러나 CME를 규모별로 나누어 그 총 발생빈도와의 상관관계를 알아 본 결과 Ap지수와 aa지수는 속도가 빠른 경우, Dst지수는 각너비나 속도별로 나눈 모든 경우에 상관도가 높게 나왔다. 흑점과 지자기폭풍 발생빈도의 경우 흑점수와 면적의 전체 분포와 지자기폭풍 사이의 상관관계가 높게 나타났다. 이 결과를 통해 CME의 발생빈도 분포는 흑점의 분포와 연관성이 높고 이 둘의 전체 분포와 지자기폭풍의 발생빈도 분포와의 연관성이 높은 것을 알 수 있다. 그리고 CME, 흑점의 북-남 비대칭 분포와 지자기폭풍의 발생빈도 분포의 경우 연관성이 낮은 것을 알 수 있다.

• Journal of Astronomy and Space Sciences
• /
• 제25권4호
• /
• pp.383-394
• /
• 2008

코로나질량방출(CMEs)의 지구영향도를 효율적으로 예측하기 위해 속도가 빠른 CMEs의 방향지시 매개인수(parameter)를 조사하여 Dst 지수 최소값과의 상관관계를 비교하였다. 그리고 이 매개인수 중 어떤 매개인수가 예측 효율성이 높은지 알아보았다. 이를 위해 SOHO/LASCO 목록에서 CMEs의 속도가 1000km/s 이상, CMEs발생 위치가 태양 중심에서 ${\pm}30^{\circ}$ 이내에 위치한 혜일로(halo) CMEs를 사용하였다. 이 CMEs가 태양에서 발생하여 지구에 도착하는 시각을 모델을 이용하여 예측한 뒤 이 시각에 가장 가까운(24시간 이내) Dst 지수 최소값을 구하였다. 이를 통해 CMEs의 지구 영향도를 판별하였다. 전체 30개의 사건 중 22개(73%)가 지자기 폭풍을 일으켰다. 우리는 CMEs의 지구 영향도를 예측하기 위해 기존의 방향 매개인수와 이번 연구에서 새롭게 제안한 이심을, 이동거리, 중심각 매개인수를 사용하였다. 이들 매개인수와 Dst 지수 최소값의 상관관계 분석을 통해 상관계수 값을 알아보고 그 결과를 통해 어떤 매개인수가 CMEs의 지구 영향도 예측 효율이 높은지 비교하였다. 그 결과 이심율 매개인수가 가장 좋은 상관관계를 보였고, 방향 매개인수는 비교적 좋은 상관관계를 보였다. 이동거리와 중심각 매개인수는 이심율과 방향 매개인수보다 낮은 상관관계를 보였다. 하지만 이들 역시 강한 지자기 폭풍(Dst 지수 ${\leq}$-200nT)의 경우에는 좋은 상관관계를 보였다. 방향 매개인수 값이 0.6 이상이고 이심율 매개인수 값이 0.4 이하이며 이동거리, 중심각 매개인수 값이 0.2 이하인 경우에는 강한 지자기 폭풍(Dst 지수 ${\leq}$-200nT)이 일어날 확률이 아주 높음을 알 수 있었다. CMEs의 방향을 지시하는 매개인수는 CMEs의 지구 영향도를 판별하는데 유용하고 이를 복합적으로 고려한다면 예측의 효율성을 높일 수 있다.

• 천문학회보
• /
• 제35권2호
• /
• pp.50.2-50.2
• /
• 2010

Magnetic helicity injection in 28 solar active regions producing 46 CMEs was investigated to find its relationship with the occurrence and speed of CMEs. The helicity injection in the active regions under investigation was calculated using full-disk 96 minute MDI magnetograms. The major findings of this study are as follows. First, the 46 CMEs are categorized into two different groups by two characteristic evolution patterns of helicity injection in their active regions: (1) a monotonically increasing of helicity accumulation (Group A; 30 CMEs in 23 active regions) and (2) significant helicity injection followed by its sign reversal (Group B; 16 CMEs in 5 active regions). Second, a fairly good correlation between the helicity injection rate and the CME speed is found for the 30 CME events in Group A. Further statistical studies, however, are needed to check whether the two characteristic helicity patterns are shown in other CME-productive active regions.

• 천문학회보
• /
• 제37권2호
• /
• pp.129.2-129.2
• /
• 2012

Solar flares and coronal mass ejections (CMEs) are two major solar eruptive phenomena which can cause enormous economic and commercial losses: (1) flares are sudden, rapid, and intense brightenings from radio waves to Gamma-rays in the chromosphere and corona, and (2) CMEs are large-scale transient eruptions of magnetized plasma from the solar corona that propagate outward into interplanetary space. Most flares and CMEs occur in magnetically complicated solar active regions (ARs). Therefore, it is crucial to investigate magnetic fields in ARs and their temporal variations for understanding a precondition and a trigger mechanism related to flare/CME initiation. In this presentation, we will introduce an automated system for empirical forecasting of flares and CMEs in ARs using full-disk photospheric line-of-sight magnetogram data taken by the Helioseismic and Magnetic Imager (HMI) onboard the SDO.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.24.1-24.1
• /
• 2008

We examine the eccentricity parameter (EP) of Coronal Mass Ejections (CMEs). For this, we select 298 front-side CMEs from SOHO LASCO CMEs whose speed is larger than 1000km/s and angular width is greater than $120^{\circ}$ during from 1997 to 2007. These are thought to be the most plausible candidate of geoeffective CMEs. We examine the relation between CMEs eccentricity parameter and the minimum value of the Dst index. We find that strong geomagnetic storms (Dst < -200nT) are well correlated with the EP from the scattered plot. We also find that CMEs have high geoeffectiveness when they occurred near the center of the solar disk with the small EP and they have the small speed with the small EP. These results indicate that the CME EP also can be an important indicator to forecast CME geoeffectiveness such as Earthward direction parameter (Moon et al. 2005, Kim et al. 2008).