• Title/Summary/Keyword: CM4U-P

Search Result 159, Processing Time 0.028 seconds

Characterization of Cellulase from Bacillus subtilis NSC Isolated from Soil (토양으로부터 단리한 Bacillus subtilis NSC 유래 Cellulase의 특성 규명)

  • Kim, Sang Jin;Park, Chang-Su
    • Journal of Chitin and Chitosan
    • /
    • v.23 no.4
    • /
    • pp.228-233
    • /
    • 2018
  • We isolated microorganisms from soil, which is sampled at forest, Kyeonbuk, Korea, as cellulolytic microorganisms. The isolated strains were identified by analysis of 16S rRNA gene from the starins. The result, four kinds of Bacillus subtilis, one kind of Bacillus amyloliquefaciens, and one kind of Bacillus cereus were identified. Among these strains, Bacillus subtilis was selected due to its high cellulase activity and this strain was named as Bacillus subtilis CNS. The optimum pH and temperature of the cellulase from Bacillus subtilis CNS was pH 5.0 and $40^{\circ}C$, respectively. In the investigation of pH and temperature stability, the cellulase from Bacillus subtilis NSC stabled pH 4.0~6.0 range and until $40^{\circ}C$ for 30 min perfectly. In the enzyme activity for various cellulosic substrate, cellulase from Bacillus subtilis CNS showed the highest activity for CM-cellulose. And, the enzyme activities for alkali swollen cellulose, Alpha-cellulose, Sigmacell-cellulose, and Avicel were approximately 31%, 8%, 8% and 4% of activity for CM-cellulose, respectively. In the degradation of CM-cellulose, the 0.26 U/ml and 0.52 U/ml of cellulase showed 0.43 and 0.76 U/ml activity for CM-cellulose after the reaction of 120 min, respectively.

Estimation of Boundary Shear Velocities from Tidal Current in the Gyeonggi Bay, Korea (한국 경기만에서 조류자료에 의한 경계면 전단속도 산출)

  • CHOI, JIN-HYUK
    • 한국해양학회지
    • /
    • v.26 no.4
    • /
    • pp.340-349
    • /
    • 1991
  • From tidal current measurements on a tidal sand ridge in the Gyeonggi Bay from August 24 to September 29, 1987, tidal current velocities at 1.0 m above bottom (U/SUB 100/) and boundary shear velocities (U/SUB */) are calculated. The mean speeds of tidal current for flood and ebb over the entire period are 56.3 cm/sec and 63.7 cm/sec in mid-depth (9.0 m above bottom), and 43.9 cm/sec and 43.8 cm/sec in near-bottom (1.5 m above bottom). The exponent(P) in "power law", which is generally used for extrapolation from the mid-depth current velocity to that at the top of nationally logarithmic layer, is estimated to be 0.15 in the study area. Using logarithmic velocity profile assumption, mean values of U/SUB 100/ and U/SUB */ are calculated to be 41.4 cm/sec and 2.39 cm/sec, respectively. The mean value of U/SUB */ (2.39 cm/sec) is much higher than the critical shear velicity (U/SUB *c/) of 1.40 cm/sec reported by Choi (1990). and thus, it can be suggested that the most of sands on the tidal sand ridge in the study area are easily eroded and transported for the greater part of tidal period.

  • PDF

Effects of Blending Fatty Acid-Glycerol-pMDI with Urea-Formaldehyde Resin Adhesives to Their Adhesion for the Use of Soybean Oil (콩기름 이용을 위한 지방산-글리세롤-pMDI와 요소수지 혼용 접착제가 접착성능에 미치는 영향-)

  • You, Young-Sam;Choi, Jin-Lim;Seo, Jun-Won;Park, Heon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.34 no.4
    • /
    • pp.31-36
    • /
    • 2006
  • This study was conducted to improve the bond strength of plywood bonded with F/U molar ratio urea-formaldehyde (UF) resins modified with the selected FGMDI prepolymer contents for various purposes. The amount of FGMDI was mixed with liquid UF resin at 0 wt% (as control), 2 wt%, 5 wt%, 10 wt%, 25 wt%, and 50 wt% based on the resin solids. As results, in bonding strength, plywood with F/U molar ratio of 1.4 showed the highest value in Type 2 test and all molar ratio UF resins modified with over 25 wt% of the FGMDI showed more than $11kgf/cm^2$, which was satisfied the minimum requirement of KS standard, $7.5kgf/cm^2$, after Type1.5 testing. As F/U molar ratio was increased and the FGMDI addition in the UF resin was increased, average reduction rate of Type 1.5 bonding strength compared with Type 2 was significantly decreased.

Effects of Feeding Different Protein Supplements on Digestibility, Nitrogen Balance and Calcium and Phosphorus Utilization in Sheep

  • Viswanathan, T.V.;Fontenot, J.P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.22 no.5
    • /
    • pp.643-650
    • /
    • 2009
  • Two metabolism trials were conducted with 24 wether lambs to investigate the effects of feeding crab meal and other protein supplements on N utilization, digestibility and Ca and P balance in sheep. The lambs (avg. BW, 25 kg) were randomly allotted to eight diets in each of two trials. The supplements were: i) none, negative control (NC); ii) soybean meal (SBM), control; iii) supplement based on industrial byproducts of both plant and animal origin (IPA); iv) experimental supplement based on byproducts of animal origin (ESA); v) hydrolyzed supplement No 4. (HESA); vi) commercial supplement based on animal protein (CS), $Pro-Lak^{(R)}$ vii) crab meal (CM); and viii) urea (U). The supplements supplied 33% of the total dietary N (CP, 9.8%; DM basis). Lambs fed the NC diet had lower (p<0.05) DM and OM digestibility. Lower (p<0.05) apparent absorption of N was recorded for the lambs fed the HESA and NC diets. Sheep fed CM had lower Ca absorption compared to SBM. Highest (p<0.05) P absorption was observed for lambs fed CS and CM and lowest for U and NC diets. Sheep fed CM had higher (p<0.05) total VFA concentration (65.7 ${\mu}mol/ml$), compared to those fed ESA, CS, and NC diets (47.3, 49.8, and 49.5 ${\mu}mol/ml$, respectively). Highest (p<0.05) ruminal $NH_3$ N (29.6 mg/dl) was observed in lambs fed the U diet, while those fed the NC diet had the lowest (p<0.05) average value (7.66 mg/dl). Lambs fed the U diet had the highest (p<0.05) blood urea N (10.67 mg/dl). The present study showed that N utilization of diets supplemented with experimental supplements based on feather meal and blood meal; commercial supplement based on animal protein, $Prolak^{(R)}$ supplement based on plant protein and blood meal; and crab meal are comparable with that of soybean meal.

Effect of Superovulation and Freezing Methods on the Survival of Bovine Embryos (육우의 과배란 유기와 동결방법이 난자의 생존율에 미치는 영향)

  • 문성호;김중계
    • Journal of Embryo Transfer
    • /
    • v.11 no.3
    • /
    • pp.271-281
    • /
    • 1996
  • The effect of superovulation (PMSG, FSH) on the ovarian response of matured cows were tested. The survival rates of bovine embryos and ovarian oocytes frozen by slow, rapid freezing and vitrification were investigated. A total of 15 heads of cow were devided into 3 groups by injection dose of GTH (PSMG, FSH). Each group was superrovulated with injections of 2, 500, 3, OOOJU PSMG and 40mg FSH followed by injection of 30mg PGF2a. Embryos were non-surgically recovered from superovulated cows 6~7days after estrus. The recovered embryos were frozen in 10% glycerol + 10% sucrose by slow and rapid freezing. Ovarian oncytes were frozen in 20% g]ycerol+l0% ethylene glycerol + 30% Ficol + 10% sucrose by vitrification and the survival of frozen embryos and ovarian oncytes were judged by FDA-test. The results are summarized as follows; 1. Estrus after the injection of 2500, 3000 I.U. PMSG and 4Omg FSH were 32.8, 35.0 and 43.4 and the duration of estrus were 18.6, 18.8 and 22.4 hours respectively. 2. The average sizes of the left ovaries were 5.4cm (2, 500 IU PMSG), 5.1cm (3, OOOIU PMSG) and 6.4cm (FSH), and the right were 6.2cm (2, 5001U PMSG), 5.7cm (3, OOOIU PMSG) and 7.&m (FSH) respectively. There were significant differences in the right overies among treatments (P<0.05). 3. The average number of ovarian follicles in the left ovaries were 4.8 (2, 500 IU PMSG), 5.2(3, 000 IU PMSG) and 7.8 (FSH) respectively. There were significant difference in the right ovaries among treatments (P<0.05). 4. In the average numbers of ovulation points in the left ovaries were 3.0 (2, 5001U PMSG), 3.2 (3, OOOIU PMSG) and 4.4 (FSH) respectively, and the right were 7.2 (2, 5001U PMSG), 7.8(3, 000IU PMSG) and 11.4 (FSH). There were significant differences in the right ovaries among treatments (P<0.05). 5. The numbers of the recovered embryos were 20 (2, 5001U PMSG), 19 (3, 000 IU PMSG) and 21 (FSH) respectively, and oncytes and degenerted oncytes were 6.5 and 11.0 Estrus periods of post parturation were 52.4days (2, 5001U PMSG), 69.8days (3, OOOIU PMSG) and 62.4days (FSH) respectively. 6. The FDA score of cow morulae frozen by slow freezing, sernirapid frezing and vitrified freezing was higher in slow (3.1) and vitrified freezing (3.0) than that in semirapid freezing (1.28). The FDA-scores of cow, pig and rabbit ovarian oocytes frozen in 20% glycerol + 10% ethylene glycol + 30% Ficoll + 10% sucrose by vitrification were higher in cows (3.3) than both in pigs (2.6) and rabbits (2.3).

  • PDF

Corrosion Behaviour of Water Pipes (수도관의 부기거동에 관한 연구)

  • 김원만;박영식
    • Journal of environmental and Sanitary engineering
    • /
    • v.7 no.1
    • /
    • pp.1-16
    • /
    • 1992
  • Corrosion of pipes Is one of the most serious problems in the maintenance of water worlds. Corrosion is promoted not only by physical factors such as temperature, but also by electrochemical factors including concentration of soluble metal ions, chlorine ion, pH, DO and microorganisms. Corrosion products also affect corrosion rate. In this research, study results are summarized as follows ; 1) Corrosion test was performed for 4 weeks at $70^{\circ}C$, pH 7.0 with specimens of 4 types of metal materials used as service pipes. Corrosion rate and S.E.M were analyzed. The results were showed that corrosion 1.ate of carbon steel pipe was 4.10~5.22 $mg/\textrm{cm}^2$ . week, galvanized steel pipe 0.98~1.34$mg/\textrm{cm}^2$. week, Copper pipe 0.02~0.04$mg/\textrm{cm}^2$. week, stainless steel pipe 0.05~ 0.10$mg/\textrm{cm}^2$ . week. 2) When corrosion rate was tested for tile types of pipes at pH 7 and both $25^{\circ}C$ and $75^{\circ}C$, avaerage corrosion rate for 6 weeks at $25^{\circ}C$ Ivas 2.26$mg/\textrm{cm}^2$ . week in carbon steel pipe, 1.99$mg/\textrm{cm}^2$. week in galvanized steel pipe, 0.26 $mg/\textrm{cm}^2$. week in stainless steel pipe. At $87^{\circ}C$, average corrosion rate for 4 weeks u.3s 4.56 $mg/\textrm{cm}^2$. week in carbon steel pipe,

  • PDF

A study on the Degradation and By-products Formation of NDMA by the Photolysis with UV: Setup of Reaction Models and Assessment of Decomposition Characteristics by the Statistical Design of Experiment (DOE) based on the Box-Behnken Technique (UV 공정을 이용한 N-Nitrosodimethylamine (NDMA) 광분해 및 부산물 생성에 관한 연구: 박스-벤켄법 실험계획법을 이용한 통계학적 분해특성평가 및 반응모델 수립)

  • Chang, Soon-Woong;Lee, Si-Jin;Cho, Il-Hyoung
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.1
    • /
    • pp.33-46
    • /
    • 2010
  • We investigated and estimated at the characteristics of decomposition and by-products of N-Nitrosodimethylamine (NDMA) using a design of experiment (DOE) based on the Box-Behken design in an UV process, and also the main factors (variables) with UV intensity($X_2$) (range: $1.5{\sim}4.5\;mW/cm^2$), NDMA concentration ($X_2$) (range: 100~300 uM) and pH ($X_2$) (rang: 3~9) which consisted of 3 levels in each factor and 4 responses ($Y_1$ (% of NDMA removal), $Y_2$ (dimethylamine (DMA) reformation (uM)), $Y_3$ (dimethylformamide (DMF) reformation (uM), $Y_4$ ($NO_2$-N reformation (uM)) were set up to estimate the prediction model and the optimization conditions. The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were $Y_1$ [% of NDMA removal] = $117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$= 96%, Adjusted $R^2$ = 88%) and 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2$ [DMA conc] = $-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2+0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%) and 35.2 uM ($X_1$: 3 $mW/cm^2$, $X_2$: 220 uM, $X_3$: 6.3), $Y_3$ [DMF conc] = $-6.2+0.2X_1+0.02X_2+2X_3-0.26X_1^2-0.01X_2^2-0.2X_3^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, Adjusted $R^2$ = 94.4%) and 3.7 uM ($X_1:\;4.5\;$mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$) and $Y_4$ [$NO_2$-N conc] = $-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, Adjusted $R^2$ = 95.7%) and 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). This study has demonstrated that the response surface methodology and the Box-Behnken statistical experiment design can provide statistically reliable results for decomposition and by-products of NDMA by the UV photolysis and also for determination of optimum conditions. Predictions obtained from the response functions were in good agreement with the experimental results indicating the reliability of the methodology used.

Synthesis and Properties of Uranium Compounds (I). Salts of Bis(undecatungstophosphato)uranate(Ⅳ) Anion, $[U(PW_{11}O_{39})_2]^{10-}$ (우라늄 화합물의 합성과 성질에 관한 연구 (제1보). 비스(운데카텅스토포스파토)우라늄(IV) 산 이온, $[U(PW_{11}O_{39})_2]^{10-}$의 염)

  • Chul Wee Lee;Hyunsoo So
    • Journal of the Korean Chemical Society
    • /
    • v.26 no.3
    • /
    • pp.160-164
    • /
    • 1982
  • A guanidinium salt of $[U(PW_{11}O_{39})_2]^{10-}$, the solubility of which is adequate for crystal growing, has been synthesized. Using this salt or potassium salt, we have measured the stability of $[U(PW_{11}O_{39})_2]^{10-}$as a function of pH of the solution and found that the anion is stable for the pH range 3~7. We have developed a colorimetric method for determining the concentration of $U^{4+}$. In this method$PW_{11}O_{39}^{7-}$ is added to$U^{4+}$ in such a quantity that the mole ratio $PW_{11}O_{39}^{7-}/ U^{4+}$exceeds 2 and the intensity of the 22.7kK band (${\varepsilon}$1030 M-1cm-1) is measured. In order to develop a continuous method to recover uranium, we have determined the amount of recoverd$PW_{11}O_{39}^{7-}$ after decomposing $[U(PW_{11}O_{39})_2]^{10}$- by adding either a base or an oxidizing agent. The percentage of $PW_{11}O_{39}^{7-}$recovered was approximately 70% when a base was used and approximately 80% when$K_2S_2O_8$ was used. A colorimetric method for determining $PW_{11}O_{39}^{7-}$ has also been developed.

  • PDF

The Relationship between Exercise, Bone Mineral Density and Antioxidant Enzyme Activity of Postmenopausal Women

  • Lee, Haeng-Shin;Lee, Da-Hong;Kim, Mi-Hyun
    • Preventive Nutrition and Food Science
    • /
    • v.11 no.4
    • /
    • pp.298-304
    • /
    • 2006
  • This study was carried out to elucidate the relationship among exercise, bone mineral density and antioxidant enzyme activity of postmenopausal women. 60 women residing in the Iksan, Korea area were recruited. The questionnaires were designed to find out exercise habits. Bone mineral density (BMD) was measured by dual energy X-ray absorptiometry. Parameters of antioxidative capacity, including the activities of superoxide dismutase (SOD), glutathione peroxidase (GPx), catalase (CAT) and total antioxidant capacity (TA) were analyzed in fasting blood. The mean age, height, weight, and BMI of subjects were 65.0 years, 151.1 cm, 59.5 kg $26.0\;m/kg^2$, respectively. The mean BMDs of subjects were $0.85\;g/cm^2$ (lumbar spine), $0.6\;g/cm^2$ (Femoral neck), $0.49\;g/cm^2$ (trochanter), and $0.40\;g/cm^2$ (Ward's triangle). There was a significant difference in BMD among different age groups (50's, 60's and 70's) showing lower value with increasing age (p<0.05). The mean SOD, GPx, and CAT activities were 138.5 U/mL, 1,273.8 U/mL and 314.3 kU/L respectively, and TA was 1.16 mmol/L. TA of the group which exercised 3$\sim$4 times a week was significantly higher than those of the other exercise groups (p<0.05). The subjects with higher SOD activity also have a higher the T values in the lumbar spine, femoral neck, trochanter, and Ward's triangle. In conclusion, this study revealed that the levels of antioxidant enzyme activity were closely associated with the exercise status and bone mineral density in postmenopausal women.

Investigation on the Egg Quality of the Ostrich Farming in Korea (우리 나라 농장 사육 타조 알의 난질 조사)

  • Song, Kwang-Taek;Oh, Hong-Rock
    • Korean Journal of Agricultural Science
    • /
    • v.29 no.1
    • /
    • pp.44-54
    • /
    • 2002
  • The fresh eggs of African ostrich in Korea were used in this study to investigate their interior and exterior quality characteristics. In ostrich egg shape characteristics, long and short length were measured as 15.1~16.1 cm and 12.1~13.6 cm, respectively. The egg shape index was calculated as 81.0 and the egg shell showed a more g loss white in color than that of hen egg. Calculated breaking strength of egg shell and egg shell surface based on the equation were $41.155kg/cm^3$ and $804.7cm^2$, respectively. Average egg shell thickness including egg shell membrane was 1.89 mm and there are no differences among parts of the shell. The egg shell membrane thickness was 0.10 mm showing relatively thick in equator compared with that of blunt end. The ave rage number of egg shell pores was counted as $19.7/cm^2$ showing relatively high number of egg shell pores at point end and the total number of egg shell pores in an egg was estimated as 15,241. The relative port ion of each parts based on egg weight was estimated as 25.1% for egg yolk, 58.2% for egg white, 16.7% for egg shell and the ratio of egg yolk to egg white (Y/W) was 0.43. The average diameter and the ave rage height of ostrich egg white were 19.7 cm and 13.2 mm, respectively. Calculated the H.U (Haugh Unit) was -69.7 and the pH was 8.3. In ostrich egg yolk, the diameter, the height, the egg yolk index, and it's pH were calculated as 14.4 cm, 29.4 mm, 0.20, and 6.6, respectively. And the egg yolk color showed a more thin in yellow chroma compared with that of hen egg as due to it's thicker membrane.

  • PDF