• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.62-62
• /
• 2018

Pt is still considered as one of the most active electrocatalysts for ORR in alkaline fuel cells. However, the high cost and scarcity of Pt hamper the widespread commercialization of fuel cells. As a strong candidate for the replacement of Pt catalyst, silver (Ag) has been extensively studied due to its high activity, abundance, and low cost. Ag is more stable than Pt in the pH range of 8~14 as the equilibrium potential of Ag/Ag+ being ${\approx}200mV$ higher than that of Pt/PtO. However, Ag is the overall catalytic activity of Ag for oxygen reduction reaction(ORR) is still not comparable to Pt catalyst since the surface Ag atoms are approximately 10 times less active than Pt atoms. Therefore, further enhancement in the ORR activity of Ag catalysts is necessary to be competitive with current cutting-edge Pt-based catalysts. We demonstrate the architectural design of Ag catalysts, synthesized using plasma discharge in liquid phase, for enhanced ORR kinetics in alkaline media. An attractive feature of this work is that the plasma status controlled via electric-field could form the Ag nanowires or dendrites without any chemical agents. The plasma reactor was made of a Teflon vessel with an inner diameter of 80 mm and a height of 80 mm, where a pair of tungsten(W) electrodes with a diameter of 2 mm was placed horizontally. The stock solutions were made by dissolving the 5-mM AgNO3 in DI water. For the synthesis of Agnanowires, the electricfield of 3.6kVcm-1 in a 200-ml AgNO3 aqueous solution was applied across the electrodes using a bipolar pulsed power supply(Kurita, Seisakusyo Co. Ltd). The repetition rate and pulse width were fixed at 30kHz and 2.0 us, respectively. The plasma discharge was carried out for a fixed reaction time of 60 min. In case of Ag nanodendrites, the electric field of 32kVcm-1 in a 200-ml AgNO3 aqueous solution was applied and other conditions were identical to the plasma discharge in water in terms of electrode configuration, repetition rate and discharge time. Using SEM and STEM, morphology of Ag nanowires and dendrites were investigated. With 3.6 kV/cm, Ag nanowire was obtained, while Ag dendrite was constructed with 32 kV/cm. The average diameter and legth of Ag nanowireses were 50 nm and 3.5 um, and thoes values of Ag dendrites were 40 nm and 3.0 um. As a results of XPS analysis, the surface defects in the Ag nanowires facilitated O2 incorporation into the surface region via the interaction between the oxygen and the electron cloud of the adjacent Ag atoms. The catalytic activity of Ag for oxygen reduction reaction(ORR) showed that the catalytic ORR activity of Ag nanowires are much better than Ag nanodendrites, and electron transfer number of Ag nanowires is similar to that of Pt (${\approx}4$).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.1
• /
• pp.27-35
• /
• 1980

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in' daytime and at night by using two species of commercial fishes: rock bream, Oplegnathus fasciatus(Temminet et Schlegel) and glass-puffer,\ulcorner Fugu.niphobles (Jordan \ulcorneret. Snyder). An experimental tank($360L{\times}50W{\times}55H cm$) was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the. experiment water depth was maintained 50 em level in the tank. The tank was marked into six longitudinal sections each, being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted40 times every 30 seconds, and the gathering rates were obtain from th~ average number of. fish' in each section. The light intensity inducing maximum gathering rate is as follows: rock bream: 162.0 lux (104,3--238, 1 lux) (day), 162.0 lux (104.3--238.1 lux) (night). grass puffer: 16.6 lux (10.6--24.5 lux) (day), 1. 9 lux (1. 2-2. 9 lUX) (night). Trend .of the gathering rate in illumination time revealed different results in two fish species. Gathering rate of rock bream showed the increasing trend fluctuately with the lapse of ' illumination time. However, that of grass puffer showed the increasing trend gradually at the early period of the illumination time and the uniform trend at the latter period with little distictive fluctuation.

• Journal of Environmental Science International
• /
• v.20 no.10
• /
• pp.1329-1336
• /
• 2011

The objectives of this study are to examine the processing of oils contamination soil by means of using a micronano-bubble soil washing system, to investigate the various factors such as washing periods, the amount of micro-nano bubbles generated depending on the quantity of acid injection and quantity of air injection, to examine the features involved in the elimination of total petroleum hydrocarbons (TPHs) contained in the soil, and thus to evaluate the possibility of practical application on the field for the economic feasibility. The oils contaminated soil used in this study was collected from the 0~15 cm surface layer of an automobile junkyard located in U City. The collected soil was air-dried for 24 hours, and then the large particles and other substances contained in the soil were eliminated and filtered through sieve No.10 (2 mm) to secure consistency in the samples. The TPH concentration of the contaminated soil was found to be 4,914~5,998 mg/kg. The micronano-bubble soil washing system consists of the reactor, the flow equalization tank, the micronano- bubble generator, the pump and the strainer, and was manufactured with stainless material for withstanding acidic phase. When the injected air flow rate was fixed at 2 L/min, for each hydrogen peroxide concentrations (5, 10, 15%) the removal percents for TPH within the contaminated soil with retention times of 30 minutes were respectively identified as 4,931 mg/kg (18.9%), 4,678 mg/kg (18.9%) and, 4,513 mg/kg (17.7%). And when the injected air flow rate was fixed at 2 L/min, for each hydrogen peroxide concentrations (5, 10, 15%) the removal percents for TPH within the contaminated soil with retention times of 120 minutes were respectively identified as4,256 mg/kg (22.3%), 4,621 mg/kg (19.7%) and 4,268 mg/kg (25.9%).

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.331-342
• /
• 2013

동아프리카 열곡대는 아라비아반도와 아프리카 북동부의 경계에서 부채꼴 형태로 남쪽으로 뻗은 대단층 함몰지구대이다. 아프리카 판 내부에 발달한 열곡대의 폭은 35~60 km이며 연장은 약 4,000km로 알려져 있다. 열곡대는 에티오피아에서 남서방향으로 발달하다 에티오피아 남부에서 동, 서 및 남서 열곡대로 나누어진다. 이 열곡대는 제3기초 올리고세(30~35 Ma)부터 에티오피아 북부 아파르 침강대를 중심으로 주 에티오피아 열곡대가 형성되고, 남쪽으로 확장되면서 마이오세에 활성화된다. 서부 열곡대는 동아프리카대지의 가장자리와 빅토리아 호의 서편을 따라 발달하며, 고각의 정단층에 의해 특징되는 전형적인 반지구대이다. 동부 열곡대(주 에티오피아 열곡대와 케냐 열곡대)는 30 Ma 전 화산활동과 지구조활동이 시작되었으나, 서부 열곡대는 Albert 호 북부에서 12 Ma 전에, Tanganyika 열곡에서는 7 Ma 전부터 시작되었다. 서부 열곡대의 남서 방향으로 분기된 남서 열곡대는 DR-콩고 남부와 잠비아의 Tanganyika 호에서부터 남서 방향으로 확장되어 보츠와나 Okavango 열곡대와 연결된다. 주 에티오피아 열곡대(MER)의 화산암류와 관련 퇴적암류는 지열, 소다회, 포타쉬(K), 천열수 금, 벤토나이트, 유황 및 부석자원으로 중요한 관련암으로 역할을 한다. 열곡관련 대표적인 광상으로는 Afar 열곡대에 분포하는 Danakhil K-광상과 Megenta 및 Blackrock 천열수 금광상이다. Danakhil K-광상은 제4기 화산활동과 높은 지열류에 의해 열곡대 내 분포하던 소금 선상지(salt fan)에서 증발작용에 의해 형성된 증발형 K-광상으로서 총 자원량은 약 12.6억톤으로 평가되었다. 이 광상에서는 4종의 K-광물인 실바이트, 카날라이트, 포리하라이트, 카이나이트가 산출한다. 아파르 침강대 내 분포하는 대표적인 천열수 금광상은 텐다호 지구대에 위치하는 Megenta 및 Blackrock 광상이다. 제4기에 EMR에서 산성의 과알칼리 화산활동에 의해 열수활동이 초래되어 현재까지도 활동하여 지열대가 형성되고, 저유황형금 광상들이 형성되었다. Megenta 저유황형 금 광상은 2009년 발견되었으며, 현재 영국의 Startex International사에 의해 탐사가 진행 중이다. 지금까지의 탐사 결과 옥수질 규화 변질암 분포지에서 5개의 광체가 분포하며, 그중 Hyena 광체에서는 규화 변질된 열수각력암에서 최고 16.75 g/t의 금 품위가 보고되었다. 동아프리카 열곡대의 서편인 부룬디에 분포하는 Gakara REE 광상은 카보너타이트 유형의 REE 광상이다. 이 광상은 $400km^2$ 면적 내 수 cm부터 수 m까지의 폭을 가지는 맥상 또는 망상세맥상의 광체를 형성한다. 주로 조립의 바스트너사이트와 모나자이트로 구성된다. 바스트너사이트의 형성시기는 $587{\pm}4Ma$인 신원생대로 알려져 있으며, 이 지역에 분포하는 카보너타이트와 알칼리암들이 신원생대에서 신생대까지의 광범위한 연대를 보이는 것은 동일한 구조선을 따라서 일어나는 반복되는 열곡활동으로 해석된다. 또한 REE, U, 인회석 자원의 관련암체로 생각되는 알카리 조면암(네펠린-조면암 포함)과 카보너타이트는 동아프리카 열곡대의 남동부 끝자락인 말라위와 모잠비크에 우세하게 분포한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.666-672
• /
• 2014

We have investigated the gate insulator effects on the electrical performance of p-type tin monoxide (SnO) thin-film transistors (TFTs). Various SnO TFTs are fabricated with different gate insulators of a thermal $SiO_2$, a plasma-enhanced chemical vapor deposition (PECVD) $SiO_x$, a $150^{\circ}C$-deposited PEVCD $SiO_x$, and a $300^{\circ}C$-deposited PECVD $SiO_x$. Among the devices, the one with the $150^{\circ}C$-deposited PEVCD $SiO_x$ exhibits the best electrical performance including a high field-effect mobility ($=4.86cm^2/Vs$), a small subthreshold swing (=0.7 V/decade), and a turn-on voltage around 0 (V). Based on the X-ray diffraction data and the localized-trap-states model, the reduced carrier concentration and the increased carrier mobility due to the small grain size of the SnO thin-film are considered as possible mechanisms, resulting in its high electrical performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.368-368
• /
• 2016

그래핀(Graphene)은 탄소 원자가 6각 구조로 이루진 2차원 알려진 물질 중 가장 얇은(0.34 nm) 두께의 물질이며 그 밴드구로조 인해 우수한 전자 이동도($200000cmV^{-1}s^{-1}$)를 가지고 있며, 이외에도 기계적, 화학적으로 뛰어난 특성을 가진다. 대면적화 된 그래핀을 성장시키기 위한 방법으로는 화학적 기상 증착법(Chemical Vapor Deposition)이 있다. 하지만 실제 여러 전이금속에서 합성되는 그래핀은 다결정으로, 서로 다른 면 방향을 가진 계면에서 전자의 산란이 일어나며, 고유의 우수한 특성이 저하되게 된다. 따라서 전자소재로 사용되기 위해서는 단결정의 대면적화 된 그래핀에 대한 연구가 지속적으로 이루어지고 있다. 앞서의 두 문제점 중, 단결정의 그래핀 합성에 크게 영향을 미치는 요인으로는 크게 합성 온도, 촉매 기판의 탄소 용해도, 촉매 표면에서의 탄소 원자의 확산성이 있다. 본 연구에서는 구리, 니켈, 실리콘에 비해 탄소 용해도가 낮으며, 탄소 원자의 높은 확산성으로 인해 단결정의 단층 그래핀을 합성에 적합하다고 보고된 저마늄(Germanium) 기판을 사용하여 그래핀을 합성하였다. 단결정의 그래핀을 성장시키기 위해 메탄(Methane; $CH_4$)가스의 주입량과 수소 가스의 주입량을 제어하여 성장 속도를 조절 하였으며, 성장하는 그래핀의 면방향을 제어하고자 하였다. 표면의 산화층(Oxidized layer)을 제거하기 위하여 불산(Hydrofluoric acid)를 사용하였다. 불산 처리 후 표면의 변화는 원자간력현미경(Atomic force microscopipe)을 통하여 분석하였다. 합성된 그래핀의 특성을 저 에너지 전자현미경(Low energy electron microscopy), 광전자 현미경(Photo emission electron microscopy), 라만 분광법(Raman spectroscopy), 원자간력현미경(Atomic force microscopy)와 투과전자현미경 (transmission electron microscopy)을 이용하여 기판 표면의 구조와 결정성을 분석하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.493-506
• /
• 2002

Recently as the esthetic concerns about dental prosthesis have been increased, the nonmetallic post and core systems have been introduced clinically to improve the color and the low optical transmittance of conventional casting metal post and core systems. The purpose of this study was to compare and analyze the optical transmittance and the shade changes of all-ceramic crowns with two nonmetallic post and core systems. The experimental groups were classified as follows : Total 27 specimens(9 samples in each group) were evaluated. Group I : Natural teeth as a control group Group II : CosmoPost and $Empress^{(R)}$ core (Ivoclar-Vivadent, Liechtenstein) Group III : $LIGHT-POST^{TM}$ and $LIGHT-CORE^{TM}$ (Bisco, U.S.A.) In all group, all-ceramic crowns were fabricated with the same shade of IPS $Empress^{(R)}$ II (Ivoclar-Vivadent, Liechtenstein) after abutment preparation, and then two kinds of spectrophotometers, UV 3101 PC (Shimadzu, Japan) and CM 503i (Minolta Co. Ltd. Japan), were used to measure the optical transmittance and the color value. The following results were obtained : 1. The optical transmittance of each group without all-ceramic crowns, was siginificantly decreased in order of Group III, I and II (p<0.05). 2. The optical transmittance of each group with all-ceramic crowns cemented, were siginificantly decreased in order of Group I, II and III (p<0.05). 3. In comparison with the shade of all-ceramic crowns, there were no significant differences between groups regardless of the cementation. 4. In comparison with the shade changes in each group after the cementation of all-ceramic crowns, there were no significant differences between groups. From the above results, it is thought that the selection among materials used in this study doesn't influence greatly the esthetic restoration, because the differences of optical transmittance were so small that those were clinically insignificant.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.323-328
• /
• 2000

Free amino acids were extracted and analyzed from Korean mountain ginsengs. Chinese mountain ginsengs and Korean white ginsengs by HPLC. The highest total free amino acid content was 12.46 mg/g in Korean white ginseg(P) and the lowest total free amino acid content was 6.86 mg/g in Korean mountain ginseng (Kㅡ6) The content of arginine in a Korean white ginseng(Y) was 8.77 mg/g Arginine was 77.80% of total free amino acids in a Korean mountin ginseng (KM2) The amount of histidine and methionine in Korean mountain ginsengs were higher than any other ginsengs. The highest amount of threonine and lysine were observed in Korean white ginseng and Chinese mountain ginseng respectively, The contents of glycine in Korean mountain ginseng and korean white ginseng were higher than Chinses mountain ginseng. There is no significant difference between two mountain ginsengs and Korean white ginseng.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.4
• /
• pp.1-21
• /
• 1981

Exterior grades of Douglas-fir and aspen plywood were impregnated with interior fire-retardant chemicals and redried under low-, intermediate-, and high-temperature drying conditions. Fire-retardant treatments included borax-boric acid, chromated zinc chloride, minalith, pyresote, and a commercial formulation. Drying processes included kiln and press-drying. Evaluated were drying rates and defects generated. The borax-boric acid and the commercial treatments redried at rates similar to water-treated controls. Other salt treatments were significantly slower drying and more defect prone. Chromated zinc chloride treatment was consistently the slowest drying and most defect prone. Press drying was three times faster at an equivalent temperature level. However, thickness shrinkage doubled because of 50 1b/in. platen pressure.

• Korean Journal of Weed Science
• /
• v.11 no.3
• /
• pp.159-166
• /
• 1991

Seven oxyfluorfen formulations were tested for control of 8 weed species and rice injury under four different water depths with various ages of rice seedlings. Among formulations tested, rice injury was slight by formulations of Elvan, Coal Slag, Chitosan and Bentonite B under 0 cm or shallow water depths, and by those of Elvan and Coal Slag under deep water conditions. Weed control was high by Bentonite A and B, and Chitosan, and was low by Elvan. Coal Slag and Sand coated oxyfluorfen, if the target weeds of oxyfluorfen are annual species, further development of Elvan, coal slag, chitosan and Bentonite A would be controlled to increase control efficacy or to decrease rice injury.