• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.298-304
• /
• 2019

In this paper, the analytical method to derive wind fragility for urban street tree in Korea was shown. Monte Carlo Simulation method was used to determine the probability of failure for urban street tree. This probability result was used to determine wind fragility parameters for four types of tree based on the study of street tree species in urban area in Daegu, Korea. Wind fragility for street tree was presented in terms of median capacity and standard deviation of the natural logarithm of the capacity. Results showed that the dominant factor affecting the probability of failure of tree under wind load was their diameter. Moreover, amongst the four types of tree chosen, the tree with height 7m and diameter 35cm had the lowest probability of failure under wind loading, whereas the tree with height 8m and diameter 30cm could resist the least wind loading. The median failure wind speed for urban street tree with height 7m were 43.8m/s and 50.6m/s for diameter 30cm and 35cm, respectively. Also, for tree with height 8m, their median failure wind speeds were 38.7m/s and 45.4m/s for tree with diameter 30cm and 35cm, respectively.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.15 no.1
• /
• pp.63-73
• /
• 2013

The research was conducted to determine a seed germination and seedling establishment of rice plant under seed coating materials such as iron, silicate, and phyllite and under covered with silicate and iron coated & silicate covered in the puddled wet hill seeding and wet line seeding methods. The seedling establishment was high in silicate and untreated control of 100%>phyllite coating of 91.5%>silicate coating of 88%>iron coating and silicate covered of 86%>silicate covered of 75.5% in the puddled wet hill seeding method, respectively. At 35days after treatment there was high in seedling height at silicate covered of 23.8cm>control of 23.6cm>silicate coating of 21.4cm>phyllite coating of 20.2cm>iron coating and silicate covered of 16.8cm>iron coating of 15.4cm. In puddle wet line seeding method rice seedling establishment was high at control and silicate covered of 100%>iron coating and silicate covered by 97.5%>phyllite coating by 94.8%>iron coating by 86%. Seedling height was high in silicate covered of 22.1cm>control of 21.2cm>silicate coating of 20.0cm>phyllite coating of 19.0cm>iron coating of 17.7cm>iron coating and silicate covered of 17.0cm, respectively.

• MALSORI
• /
• no.46
• /
• pp.103-115
• /
• 2003

In this paper, we proposed Background Model Set algorithm used in the speaker verification to improve calculating confidence measure(CM) in speech recognition. CM is to display relative likelihood between recognized models and antiphone models. In previous method calculating of CM, we calculated probability and standard deviation using all phonemes in composition of antiphone models. At this process, antiphone CM brought bad recognition result. Also, recognition time increases. In order to solve this problem, we studied about method to reconstitute average and standard deviation using BMS algorithm in CM calculation.

• Journal of Applied Biological Chemistry
• /
• v.64 no.2
• /
• pp.153-158
• /
• 2021

Cordyceps militaris (CM) is one of the most important medicinal mushrooms known to possess various biological activities. Cordycepin (CP) is a bioactive compound present in the fruiting bodies of CM and is known to have anti-tumor, anti-metastatic immunomodulatory and anti-inflammatory activities. In this study, we aim to analyze CP quantitatively under various CM extraction conditions. CP was measured using high-performance liquid chromatography, quantified using a reversed phase column using a gradient elution system of water and acetonitrile, and detected with a UV absorbance wavelength of 260 nm. The CP content of CM was the highest in 100% ethanol extract of the fruiting bodies and 60% ethanol extract of the mycelium. This study provides an efficient analysis method to determine the optimal extraction conditions for CP that can be used as a basis for developing functional foods and pharmaceutical products derived from CM.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.131-141
• /
• 1994

This study was carried out to develop a procedural method to produce high strength polymer concrete using unsaturated polyt.ster resin and to examine its mechanical properties. Various mechanical properties were analyzed with respect to materials and additives. A method to produce high strength polymer concrete was successfully developed. Comperssive strength of $1,291~1,445 kg/cm^2$, splitting tensile strength of $106~145 kg/cm^2$ and flexural strength of $182~235 kg/cm^2$, at age of 7days wer-e achieved from the cylinderical ;md beam specimen prepared with the method. Modulus of elasticity. Poisson's rntio and the ultirnate corn pressive strain of cylinderical specimen were $2.8~3.8{\times}10^5\;kg/cm^2$. 0.21~0.32, and 0.005~0. 0065, respectively. Modulus of elasticity of the polymer concrete was smaller than that of hlgh strength cement concrete while the maximum compressive strain was very larger than that of high strength cement concrete.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.1-7
• /
• 1999

The polymide thin films were fabricated by vapor deposition polymerized method of dry processes and studied the electric breakdown characteristics by self healing method. Polyamic-acid(PAA) thin films prepared by vapor deposition-polymerization (VDP) from PMDA(Pyromellitic dianhydride) and DDE(4,4'-diaminodiphenyl ether) were changed to PI thin films by thermal curing. In the same sample, electric breakdown fields increase with increasing test number, and then saturated over test number of the 25th. When the curing temperatures were 200$^{\circ}C$, 250$^{\circ}C$, 300$^{\circ}C$ and 350$^{\circ}C$, the electric breakdown strengths of PI were 1.21MV/cm, 3.94MV/cm, 4.61MV/cm and 4.55MV/cm at the test number of 40th.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.45-52
• /
• 2001

The proximal isovelocity surface area (PISA) method is an effective way of measuring the regurgitant blood flow rate in the mitral valve. This method defines the modelling required to describe the geometry of the isotach of the PISA. In the normal PISA flow model, the flow rate is calculated assuming that the surface of the isotach is either hemispherical or non-hemispherical numerically. However, this paper evaluated the estimate flow rate using a direct surface subdivision flow model based on the height field after isotach extraction using a region-based scheme. To validate the proposed method, the various PISA flow models were compared using pusatile color Doppler images with flow rates ranging from $30\;cm^3/sec\;to\;60\;cm^3/sec$ flow rate. Whereas the hemispherical flow model had a mean value of $29\;cm^3/sec$ and underestimated the measured flow rate by 35%, the proposed model and non-hemispherical model produced a c;ame mean value of $45\;cm^3/sec$, moreover, both flow models produced a similar pulsatile flow rate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.459-469
• /
• 1993

The purpose of this study is to investigate the relationship between body-types and skirt-patterns by analyzing various fitting conditions of the skirt patterns in relation to the body-types. To achieve this, fitting tests were done on six types of skirt-patterns. The tests included four body-types selected according to the existing classification of the types of under part of the body. Sensory tests were performed on the existing patterns and new drafting method based on the results of the fitting tests. The results of the fitting tests and sensory test are as follows. 1. The existing skirt-patterns were relatively well-fitted except for certain parts in standard somatotype (body-type A). 2. The new drafting method, designed on the basis of the fitting test on the existing patterns, scored high on all of the eighteen items included in the test This signifies the excellence of the new drafting method. 3. In the case of the allocation between the front and the back, which is the difference between the educational patterns and industrial patterns, the best silhouette was achieved when the hip-line and the waist-line were same sized both in the back and in the front. However, in the case of body-type D it was better when there was a 1cm difference between the back and the front. 4. The number of darts that best fits young persons were found to be eight, to keep their side hip-curve smooth. Further, it is desirable to set the center line of the dart as the vertical waist-line. 5. The best length of the darts were determined to be 12.5cm, 11ch in the back, and 11cm, 9.5cm in the front. Adjustments would be made according to the differing body-types in the range of 0.5cm. 6. The lowerness of the back waist-line for the normal was determined at 1.5cm, with some variations in other body-types. 7. The front waist-line was needed to be 1cm lowered in the case of body-type B, whereas, in the case of body-type D, it was needed to be 1cm raised.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1152-1157
• /
• 1998

The PZT films were deposited on the Pt/Ti/$SiO_2$/Si substrates using multi- target DC magnetron reactive sputtering. The perovskite single phase with the composition close to the stoichiometric one, was obtained even at high substrate temperature of $540^{\circ}C$ by 2-step method, which is that PZT film was deposited for a short time at low substrate temperature ($480^{\circ}C$) to promote the nucleation of perovskite phase by reducing the volatility of Pb oxide molecules, followed by the deposition at the elevated temperature to suppress the excess incorporation of Pb component in the PZT film. This two-step method, in combination with the RTA treatment, gives rise to good electrical properties of the deposited PZT films: remanent polarifaion,$18\mu$C/$\textrm{cm}^2$; coercive field, 45kV/cm; leakage current of 10$^{-4}$ A/$\textrm{cm}^2$ at high electric field of -500kV/cm.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1308-1310
• /
• 1997

Several methods for electrode fabrication of phosphoric acid fuel cell(PAFC) have been studied. The conventional methods that include a coating method and a rolling method, have disadvantages of a very complicated drying process and a hot pressing process for making a large electrode. In this study, to solve these problems, the mixing method of coating and rolling processes has been developed. In the mixing method, the electrode was coated on the electrode support and, after drying the coated layer, was rolled at room temperature and then sintered at $350^{\circ}C$. The single cell performances of the electrodes fabricated by several methods were examined and the mixing method appeared a good cell performance of 0.65 V, $260\;mA/cm^2$. Also the single cell with an area of $2000\;cm^2$ was manufactured and its performance attained 0.593 V, 300 A.