• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.916-922
• /
• 1997

This paper attempted to estimate mesh selectivity of gill nets for neon flying squid in the north Pacific Ocean. The 11 linear regressions, (P<0.05) were obtained using the data on catch ratios derived from mesh size combinations between two slightly different mesh sizes of 12 kinds of research gillnet (namely 33, 37, 42, 48, 55, 63, 72. 76, 86, 96, 105 and 115 mm in stretched mesh size). There was an increase in the optimum length with the increase in mesh size but standard deviation showed somewhat increase with the increase in the mesh size. The selectivity curves were well fitted to the length frequency distributions obtained from samples for the mesh sizes from 48 mm through 86 mm. For the mesh sizes of 33, 37 and 42 mm the DML (Dorsal Mantle Length) compositions were distributed towards the right hand-limb of the curves. The DML distributions from the 96 mm and larger meshes showed a trend towards the left hand-limb of the curves. The selectivity curves for different mesh sizes indicate that large mesh sizes catch a greater size range of squid, and the gill net fishery in the north Pacific Ocean captures effectively neon flying squid within the range of $9\~43cm$ DML.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.265-265
• /
• 2013

We have investigated the influences of dangling bonds generated by alpha particle irradiation on friction and adhesion properties of graphene. Single layer of graphene grown with chemical vapor deposition on copper foil was irradiated by the alpha beam with the average energy of 3.04 MeV and the irradiation dosing between $1{\times}10^{14}$ and $1{\times}10^{15}$/$cm^3$. Raman spectroscopic showed that the ${\pi}$ electron states below Fermi level arises and the $I_D$/$I_G$ increases as increasing the dosing of alpha particle irradiation. The core level X-ray photoelectron (XPS) revealed that these defects represent the creation of various carbon-related defects and dangling bond. The nanoscale tribological properties were investigated with atomic force microscopy in ultrahigh vacuum. The friction appeared to increase remarkably as increasing the amount of dosing, indicating that the dangling bonds on graphene layers enhances the energy dissipations in friction. This trend can be explained by the additional channel of energy dissipation by dangling bond or O- and H- terminated clusters created by alpha particle irradiation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1338-1345
• /
• 2009

Although rock excavation is necessary for the effective utilization of urban space, most conventional rock excavation methods, including the blasting method, cause high noise and vibration. Meanwhile, if a high pressure waterjet system is applied to excavate underground spaces in urban areas, the public grievance can be reduced by low noise and vibration. In this study, an abrasive waterjet system is designed and developed to study the influence of various performance parameters such as jet pressure, nozzle traverse speed, stand-off distance, or abrasive feed rate on waterjet excavation performance in laboratory. Using the developed waterjet system, rock drilling characteristics are identified by measuring drilling depths as a function of the jet exposure time. The drilling depth linearly increases with increasing the jet exposure time(under 60sec). Rock cutting characteristics are also obtained with various jet pressures(1600~3200kg/$cm^2$) and nozzle traverse speeds(1.9~14.1mm/s): The cutting depth is nonlinearly related to the jet pressure and traverse speed. Indeed, the cutting depth increases with an increase in the jet pressure and a decrease in the nozzle traverse speed. This trend can be explained by energy transferring/loss mechanism.

• The Korean Journal of Community Living Science
• /
• v.22 no.3
• /
• pp.365-377
• /
• 2011

The dual purposes of this study were to investigate footwear worn by college students who have become spoilt for choice in apparel & shoes, and point out the problems of their shoe-wearing habbits. The survey was administered in October, 2010 to 600 college residents in Kwangju-Jeonnam area and the results are as follows. Firstly, the most frequently worn footware by males were sneakers, followed by dress shoes and oxford shoes. Females followed a similar trend with sneakers being the most frequently worn, followed by high heeled shoes, flat shoes, wedge high heeled shoes and chucker boots. Secondly, both male and female students thought that the most comfortable and favorable shoes for them were sneakers and the most uncomfortable ones were high-heeled shoes and sandals. They thought chucker boots were both fashionable and comfortable. Thirdly, the degree of unsatisfaction for shoes was relatively high and the influencing factors for unsatisfaction were uncomfortable soles, aches around the toes and a frontward leaning posture of the body, etc. Finally, 87% of the female subjects who had experience wearing high-heeled(over 7cm height) shoes showed a significant increase in foot disorders than those who had never worn high-heeled shoes. According to the results, it is necessary to educate proper selection and wearing of footwear in order to prevent foot disorders and maintain overall health of the body.

• Journal of Electrochemical Science and Technology
• /
• v.4 no.1
• /
• pp.27-33
• /
• 2013

The consequences of electrode density and thickness for electrochemical performance of lithium-ion cells are investigated using 2032-type coin half cells. While the cathode composition is maintained by 90:5:5 (wt.%) with $LiCoO_2$ active material, Super-P electric conductor and polyvinylidene fluoride polymeric binder, its density and thickness are independently controlled to 20, 35, 50 um and 1.5, 2.0, 2.5, 3.0, 3.5 g $cm^{-3}$, respectively, which are based on commercial lithium-ion battery cathode system. As the cathode thickness is increased in all densities, the rate capability and cycle life of lithium-ion cells become significantly worse. On the other hand, even though the cathode density shows similar behavior, its effect is not as high as the thickness in our experimental range. This trend is also investigated by cross-sectional morphology, porosity and electric conductivity of cathodes with different densities and thicknesses. This work suggests that the electrode density and thickness should be chosen properly and mentioned in detail in any kinds of research works.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.153-160
• /
• 1983

This study was carried out to research the change of mineral phases and the characteristics(apparent specific gra-vity water absorption firing shrinkage modulus of rupture thermal expansion and specific dielectric constant) of the sintered bodies manufactured by kaolin and limestone. Samples were composed of the same theoretical composition as it of anorthite and fired up to 145$0^{\circ}C$ Investigated the change and micro-structure of the mineral phases by XRD and SEM the characterisdtics of the sintered bodies by TMA Automatic Capacitance Bridge and etc. The results were as follow. 1. Reactions of sintering are occurred between 860-95$0^{\circ}C$ and 1200-138$0^{\circ}C$ and state of bloating is occurred at 1410-145$0^{\circ}C$ 2. For the inclusion of feldspar and its fine particles of materials the temperature of producing and collapsing is decreased. 3. Pseudo-wollastonite and gehlenite are formed about 95$0^{\circ}C$ 4. At 114$0^{\circ}C$ anorthite are begin to forming and increase continuously to 138$0^{\circ}C$. Above 141$0^{\circ}C$ content of anorthite are decreased. 5. The variations of bending strength with sintering temperature reflect similar trend of sintered contraction and in-crease continuously from 120$0^{\circ}C$. At 145$0^{\circ}C$ reached about 680kg/cm2. 6. Specific dielectric constant$($\varepsilon$_s)$ of specimen sintered at 141$0^{\circ}C$ is 7.12 and that value is most favorable.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.407-412
• /
• 2002

세계는 지금 post-genome 시대에 접어들고 있고, 하루에도 수백개 이상 밝혀지는 새로운 유전정보들이나 모든 유전암호가 밝혀진 생물들을 기존의 방법들로 연구한다는 것은 너무나 많은 시간을 요구한다. 즉, 인간 게놈 프로젝트 뿐만 아니라, 식물 게놈 프로젝트 등 다양한 분야에서 DNA chip의 필요성이 인식되고 있다. 그러나 우리나라는 DNA chip의 생산에 있어서 chip 제작에 필수적인 DNA chip 제작용 microarrayer를 고가를 들여 수입에 의존하고 있는 실정이다. 이는 DNA chip 생산비를 높이고, 더 나아가 우리나라 생명공학분야 연구의 발전에 악영향을 미치는 결과를 초래할 수 있다. 몇몇 국내 생산 업체가 있지만, 아직 그 실요성을 입증하지 못하였고, 대부분의 chip 공급업체는 아직 수입품을 사용하고 있는 상태이다. 이에 본 연구에서는 microarrayer의 국산화를 통해 안정적 DNA chip 및 microarrayer의 공급을 위해 microarrayer의 개발에 관해 수행하는 연구이며, 앞으로의 연구방향을 다음과 같이 설정하였다. 1) 유전자 검색을 위한 DNA chip 제작용 로봇 시스템 (microarrayer)을 pin 타입으로 설정한다. 2) 정밀도 향상을 위하여 로봇 시스템의 구동은 XYZ 직교좌표형으로 설정한다. 3) 1$cm^2$당 5,000개 정도의 DNA를 붙일 수 있도록 한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1982-1983
• /
• 2007

In this work, the $TiO_2$ pigment influence in HDPE dielectric strength was analyzed. Chemical and structural characterizations were made to identify changes during the processing and your influence in the electrical properties. Formulations containing 0, 0.5, 1, 2.5, 4 and 6 of titanium dioxide were processed by extrusion and injection molding with stabilization-antioxidants, ultraviolet stabilizers and plasticizers. The electrical strength tests were analyzed by the statistical distribution of Weibull, and the maximum likelihood method. The high concentrations present lower values to electrical strength. The ${\beta}$ parameter could be using to insulator particles dispersion. The TiO2 concentration variation shows that these incorporations implicate strength values increase has a maximum (5,35MV/cm). High pigment concentration induces a little falls in property values. Observing the ${\beta}$ parameter, minimum experiment electric field (Ebmin) and electric strength value, found that the best electric perform formulation was the formulation with 2.5% TiO2 weight.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.75-82
• /
• 2021

The 3D printing technology is one of the fourth industrial revolution technology that drives innovation in the manufacturing process, and should be applied to nuclear industry for various purposes according to the manufacturing trend change. In nuclear industry, it can be applied to manufacture obsolete items and new designed parts in advanced reactors or small modular reactors (SMRs), replacing the traditional manufacturing technologies. A gate valve body was manufactured, which was obsolete in nuclear power plant, using DED(Directed Energy Deposition) metal 3D printing technology after restoring design characteristics including 3D design drawing by reverse engineering. The 3D printed valve body was assembled with commercial parts such as seat-ring, disk, stem, and actuator for performance test. For the valve assembly, including 3D printed valve body, several tests were performed, including pressure test, end-loading test, and seismic test according to KEPIC MGG and KEPIC MFC. In the pressure test, hydraulic pressure of 391kgf/cm² was applied to 3D printed valve body, and no leak was detected. Also the 3D printed valve assembly was performed well in end-loading and seismic tests.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.186-190
• /
• 2007

The species composition and the biomass of intertidal microphytobenthos (MPB) were investigated at four sites in the Nakdong Estuary from Feb. to Dec. 2006. The chlorophyll (chl) ${\alpha}$ concentration showed a positive correlation with MPB abundance, and depth profiles showed similar patterns: high at the surface, rapidly decreasing within 4 cm from the surface, and slowly decreasing thereafter. A MANOVA analysis revealed that the chl ${\alpha}$ concentration varied significantly not only with depth, month, and site, but also with combinations of these factors. Among the four investigated sites, site D (Baekhabdeung) showed a seasonal biomass variation trend distinct from those of the other sites: higher in summer, decreased in autumn and with sustained low values until winter. As indicated, the other sites contrastingly showed low biomasses in summer, after which the biomasses continuously increased, with some variation among the sites. A cluster analysis of species composition indicated that sites near to each other and with similar sediment structures had closer similarities in the same seasons. The species of genus Amphora and Navicula were dominant at the four sites throughout the study period.