• 자원환경지질
• /
• 제52권6호
• /
• pp.587-593
• /
• 2019

본 연구에서는 다초점 레이저 스캔 현미경 (confocal laser scanning microscope, CLSM)을 활용한 균열의 생성 및 성장에 대한 분석을 실시하기 위해 가압조건 및 동결/융해를 통하여 풍화를 가속시킨 실험을 수행하였다. 실험에 적용된 가압조건은 시료 3개에 각 가압틀을 이용하여 50 MPa, 55 MPa, 70 MPa로 설정하였으며 조건을 유지한 상태로 동결/융해 실험을 실시하였다. 실시된 동결/융해 실험에서 온도 조건은 -20~40℃로 설정하고, 설정 온도까지 도달시간 1시간, 유지시간 2시간을 기본으로 6시간을 1주기로 하였다. 이를 바탕으로 동결/융해 매 20주기가 끝난 후 CLSM을 활용하여 시료의 표면을 관찰하였다. 그 결과 동결/융해 실험이 반복되면서 각 시료에 발생한 균열의 개수가 7개, 10개, 19개로 가해진 압력에 따라 차이를 보였고 균열의 누적 길이도 가해진 압력이 큰 시료에서 길게 나타났다. 측정한 균열의 누적 길이와 동결/융해 실험 주기를 통해 계산한 균열의 성장 속도 역시 압력의 세기에 따라 높은 압력을 가한 시료에서 빠르게 나타났다.

• 지질공학
• /
• 제22권2호
• /
• pp.173-183
• /
• 2012

본 연구에서는 응력완화실험을 통한 포화상태에서의 토노(Tono) 화강암의 표면변형에 대한 연구를 수행하였다. 본 실험을 위해서 실험이 진행되는 동안 실시간으로 다초첨 레이져 스캔 현미경(Confocal Laser Scanning Microscope, CLSM)으로 관찰이 가능하고 변위 및 응력에 대한 데이터 취득이 가능한 장치를 고안하였다. 광물내의 변형 및 광물경계부에서의 변형은 유한요소해석 방법을 사용하여 계산하였다. 그 결과 응력완화실험 중에는 광물 내부와 광물 경계부 모두에서 활발한 변형을 보이는 것이 관찰되었으며 이는 가해지는 응력이 높아질수록 더욱 커진다는 사실을 확인하였다. 또한 유한요소 해석의 결과는 광물내의 변화보다는 압축력에 의해서 발생되는 광물경계부에서의 변화가 더욱 크다는 것을 설명한다. 이를 도식화시켜 표현해보면 화강암 내부에서 광물 경계부의 변형이 광물 내부의 변형보다 크게 나타난다는 것을 쉽게 관찰 할 수 있다. 이는 흑운모와 석영의 물리화학적 특성에 기인된다고 사료된다. 즉 석영은 안정된 구체를 보이는 반면에 흑운모는 층상형태로 약한 결합구조를 보이고 있기 때문으로 판단된다.

• 한국융합학회논문지
• /
• 제8권6호
• /
• pp.139-145
• /
• 2017

본 연구는 우치의 인공우식법랑질에 대한 불소도포 후 재광화 효과를 공초점레이저주사현미경을 통해 비교하고자 진행되었다. 시편에 인공우식을 형성한 후, 대조군, 1.23% APF 겔 도포군, 그리고 5% NaF 바니쉬 도포군으로 구성하여 실험을 진행하였으며, 불소도포 전후의 양상은 CLSM을 이용하여 평균형광강도로 확인하였다. 불소도포 전 후 평균형광강도는 모든 군에서 유의하게 감소하는 양상을 보였으나, 평균형광강도변화량은 실험군간의 통계적으로 유의한 차이는 발견되지 않았다(p=0.222). 탈회된 표면의 표면미세경도와 평균형광강도 간에는 음의 상관관계를 보였고(p=0.941), 탈회표면의 평균형광강도가 클수록 불소도포 1일 경과 후 평균형광강도 증가하는 양의 상관관계를 보였다(r=0.811, p<0.001). 차 후 구강 내 환경을 반영한 모델이나 실제 in-situ 또는 임상실험을 통해 불소도포제제의 재광화 양상에 대한 연구가 필요할 것이다.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.34-37
• /
• 2002

Freestanding azobenzene-containing liquidcrystalline network (LCN) films. with macroscopic uniaxial molecular alignment were prepared by insitu photopolymerization. By polarizing microscopy, fiber-like structures aligned in one direction were observed. Furthermore, with a confocal laser scanning microscope (CLSM), it was confirmed that the fiber-like structures were formed even in the bulk of the LCNs. Upon UV light irradiation to cause trans-cis photoisomerization of the azobenzene molecules, the LCNfilms underwent a significant and anisotropic bending toward the irradiation direction of UV light. When the bent LCNfilms were exposed to Vis light, unbending of the LCN films immediately took place and the initial flat LCN films were restored. This bending and unbending behavior of the LCN films could be repeated just by changing the wavelength of the irradiation light. It was suggested that the bending was induced by an absorption gradient which produced a volume difference between the front surface area and the bulk of the network films.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.68-74
• /
• 2013

In this paper, an average surface roughness, $R_a$, was measured by optical measurement and its mathematical model according to spindle speed and feedrate was obtained by least square method. Also, its result is compared and investigated with real measured average surface roughness. The optical measurement of surface roughness is performed by CLSM(confocal laser scanning microscope) and the captured HEI(height encoded image) data is used as an original data for the generation of average surface roughness and its mathematical plane or contour surface of surface roughness. Using this polynomial model with two independent variables, the behavior of an average surface roughness is investigated and analyzed with an experimental modeling of least square algorithm. And it can be used for the prediction of $R_a$ in different condition of machining.

• 대한화장품학회지
• /
• 제34권4호
• /
• pp.311-316
• /
• 2008

본 연구에서는 모발의 내부 및 외부구조에 자외선이 미치는 영향에 관하여 조사를 수행하였다. 자외선이 조사된 모발의 형태학적 및 화학적 구조의 변화를 알아보기 위해 주사전자현미경(SEM), 투과전자현미경(TEM), 공초점레이져주사현미경(CLSM) 등을 사용하였다. SEM상에서 자외선이 조사된 모발은 자외선에 의한 화학적 산화반응에 의한 표면이 거칠고 부풀어진 형태를 보였다. 이황화결합(disulfide bond)의 산화에 의한 시스테인산(cysteic acid)의 분해로 팽윤부위가 관찰되었다. 또한 자외선 조사에 의해 표면색의 변화를 나타내었다. TEM 분석결과 버진헤어(virgin hair)의 경우에는 매끄러운 표면구조를 나타내었지만, 자외선 조사모발에 있어서는 거칠고 모수질층이 갈라진 형태를 보여주었다. 모피질층에 존재하는 멜라닌 입자의 크기가 감소하고 소실되는 것이 관찰 되었다. CLSM에 의해 3차원적 구조의 입체영상을 얻을 수 있었으며, 광학분할에 의한 버진헤어는 강한 형광을 나타내었지만, 자외선 조사모발은 낮은 형광을 보여주었다. 이는 버진헤어의 경우 자동형광을 나타낼 수 있는 방향족 아미노산이 많이 존재하는데 비해 자외선 조사모발은 방향족 아미노산이 파괴되어 낮게 나온 것으로 여겨진다.

• 지질공학
• /
• 제25권1호
• /
• pp.1-8
• /
• 2015

Deep geological disposal is the preferred storage method for high-level radioactive waste, because it ensures stable long-term storage with minimal potential for human disruption. Because of the risk of groundwater contamination, a buffer of steel and bentonite layers has been proposed to prevent the leaching of radionuclides into groundwater. Quartz is one of the most common minerals in earth's crust. To understand how deformation and dissolution phenomena affect waste disposal, here we study quartz samples at pressure, temperature, and pH conditions typical of deep geological disposal sites. We perform a dissolution experiment for single quartz crystals under different pressure and temperature conditions. Solution samples are collected and the dissolution rate is calculated by analyzing Si concentrations in a solution excited by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). After completing the dissolution experiment, deformation of the quartz sample surfaces is investigated with a confocal laser scanning microscope (CLSM). An empirical formula is introduced that describes the relationship between dissolution rate, pressure, and temperature. These results suggest that bentonite layers in engineering barrier systems may be vulnerable to thermal deformation, even when exposed to higher temperatures on relatively short timescales.

• Journal of Yeungnam Medical Science
• /
• 제37권3호
• /
• pp.217-225
• /
• 2020

Background: This study was performed to provide a long-term bacterial seal through the formation of reparative dentin bridge, calcium silicate-based pulp capping materials have been used at sites of pulpal exposure. The aim of this study was to evaluate the mineralization-inducing potentials of calcium silicate-based pulp capping materials (ProRoot MTA [PR], Biodentine [BD], and TheraCal LC [TC]) in human dental pulp cells (HDPCs). Methods: Specimens of test materials were placed in deionized water for various incubation times to measure the pH variation and the concentration of calcium released. The morphology of HDPCs cultured on the specimens was examined using a confocal laser scanning microscope (CLSM). Alizarin red S staining and alkaline phosphatase assays were used to evaluate mineralization-inducing potentials of the capping materials. Results: BD showed the highest calcium release in all test periods, followed by PR and TC. (p<0.05). All experimental groups showed high alkalinity after 1 day, except at 14 days. BD showed the highest cell viability compared with PR and TC after 1 and 3 days, while TC showed the lowest value (p<0.05). The CLSM analysis showed that cells were well adhered and expressed actin filaments for all pulp capping materials. Mineralization by PR and BD groups was higher than that by TC group based on alizarin red S staining. BD showed significantly higher alkaline phosphatase activity than PR and TC, while TC showed the lowest value (p<0.05). Conclusion: Within the limitations of the in vitro study, BD had higher mineralization-inducing potential than PR and TC.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.39-45
• /
• 1999

Refining in papermaking plays an important role in changing fiber properties as well as paper properties. The major effects of refining on pulp fibers are internal and external fibrillation, fiber shortening, and fines formation. Many workers showed that internal fibrillation of the primary refining effects was most influential in improving paper properties. In particular, refining produces separation of fiber walls into several lamellae, thus causing fiber wall swelling with water penetration. This leads to the increase of fiber flexibility and of fiber-to-fiber contact during drying. If the fibers are very flexible, they will be drawn into close contact with each other by the force of surface tension as the water is removed during the drainage process and drying stages. In order to study the effect of fiber wall delamination on paper properties, cross-sectional image of fibers in a natural condition had to be generated without distortion. Finally, it was well recognized that confocal laser scanning microscope (CLSM) could be one of the most efficient tool for creating and quantifying fiber wall delamination in combination with image analysis technique. In this study, the CLSM could be used not only to observe morphological features of transverse views of swollen fibers refined under low and high intensity, but also to investigate the sequence of fiber wall delamination and fiber wall breakage. From the CLSM images, increasing the specific energy or refining decreased the degree of fiber collapse, fiber cross-sectional area, fiber wall thickness and lumen area. High intensity refining produced more external fibrillation.