• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1545-1550
• /
• 2006

In this paper, we propose a method for applying the CLEAN algorithm to an minimum variance distortionless response(MVDR) to estimate the location of multiple targets distributed in the ocean. The CLEAN algorithm is easy to implement in a linear processor, yet not in a nonlinear processor. In the proposed method, the CSDM of a Dirty map is separated into the CSDM of a Clean beam and the CSDM of the Residual, then an individual ambiguity surface(AMS) is generated. As such, the CLEAN algorithm can be applied to an MVDR, a nonlinear processor. To solve the ill-conditioned problem related to the matrix inversiion by an MVDR when using the CLEAN algorithm, Singular value decomposition(SVD) is carried out, then the reciprocal of small eigenvalues is replaced with zero. Experimental results show that the proposed method improves the performance of an MVDR.

• Journal of Environmental Health Sciences
• /
• v.31 no.5 s.86
• /
• pp.411-414
• /
• 2005

Clean Natural is a new disinfectant of which main components are propolis and wood vinegar from Quercus mongolica. The mutagenicity of Clean Natural was studied by a micronucleus test in male ICR mice. The maximally tolerated dose (MTI) of Clean Natural was determined to >2.0 g/kg body weight. Therefore, the doses adopted for the micronucleus test was 2.0 g/kg as a high dose, 1.0 g/kg as a medium and 0.5 g/kg as a low of dose, respectively. Each of group was consisted of three doses of Clean Natural, positive control 2 mg/kg of mitomycin C and negative control 20 ml/kg of saline. A slide preparation was made at 24 hours following administration. No significant induction of micronuclei was observed in any of the three doses of Clean Natural orally administered. No cytotoxicity such as inhibition of hemopoiesis was observed in any group of test agent as the rate of polychromatic erythrocytes to total erythrocytes was over 40%. These results indicate that Clean Natural is not capable of inducing micronuclei in vivo mouse cells and thus has no genotoxicity in micronucleus test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.121-130
• /
• 2002

Clean stockers are being used by semiconductor and TFT-LCD manufacturers to store and buffer work in process. Since an important function of a stocker is to keep the contained material clean. The only way to keep the stored product clean is to provide constant clean airflow the product and through stocker, The airflow across the product prevent contamination from settling on the product. Up to now, stocker typically have been configured to receive their laminar airflow from fan filter units that are located on the side of the stocker This type of stocker may have such problems as complexity of structure, increment of temperature, mechanical vibration, initial investment and running cost. In this study, In order to solve the above mentioned problems, new air control system in stocker is proposed, which is to control open ratios of exits that are located on the side of the stocker without fan filter units. Open ratios of exits need to be optimized for the same quantities of airflow in each exit. In this study, static pressure regain was used for the analysis of the open ratios of exits theoretically and Blue Ridge Numerics FEM software, CFDesign, was used fur simulating airflow in stocker. As a result, Open ratios of exits important to provide constant clean airflow can be obtained by the analysis of static pressure regain and was verified by simulation results. Therefore, new air control system in stocker can be used by the semiconductor and TFT-LCD manufacturers.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.693-701
• /
• 2016

Steam gasification of low rank coals is possible at relatively low temperature and low pressure, and thus shows higher efficiency compared to high rank coals. In this study, the gasification reactivity of four different Indonesian low rank coals (Samhwa, Eco, Roto, Kideco-L) was evaluated in $T=700-800^{\circ}C$. The low rank coals containing $53.8{\pm}3.4$ wt% volatile matter in proximate analysis and $71.6{\pm}1.2$ wt% carbon in ultimate analysis showed comparable gasification reactivity. In addition, $K_2CO_3$ catalyst rapidly accelerated the reaction rate at $700^{\circ}C$, and all of the coals were converted over 90% within 1 hour. The XRD analysis showed no significant difference in carbonization between the coals, and the FT-IR spectrum showed similar functional groups except for differences due to moisture and minerals. TGA results in pyrolysis ($N_2$) and $CO_2$ gasification atmosphere showed very similar behavior up to $800^{\circ}C$ regardless of the coal species, which is consistent with the steam gasification results. This confirms that the indirect evaluation of the reactivity can be made by the above instrumental analyses.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.69-77
• /
• 2016

The purpose of this study is to estimate the energy expenditure of working in a clean room for manufacturing embedded needles by ergonomic programs. Embedding needle is one of medical devices and it should be manufactured in a clean room. 3D static strength prediction program was used to analyze the slow movements during embedding needle manufacturing in a clean room. Also the energy expenditure prediction program was used to estimate energy expenditure rates for materials handling tasks to help assure worker safety and health in clean room. The energy expenditures of the tasks were calculated using prediction equations derived from empirical data. The energy expenditure rate of 3.09 kcal/min in a clean room didn't exceed the 3.5 kcal/min action limit guideline for an average 8-hour day set by the National Institute for Occupational Safety and Health (NIOSH). Energy consumption was calculated on the same working conditions as EEPP program, using an average body weight of female 20 years old to 59 years who would be the candidates of the real workers.

• Journal of Biosystems Engineering
• /
• v.24 no.4
• /
• pp.317-324
• /
• 1999

This study was conducted to decide several design criterion for clean-washed rice processing system development. A Computer simulation was used to predict and analyze the mass balances and moisture changes of the process of clean-washed rice processing system. The following results were obtained from this study. 1. In order to attain the processing capacity of 1,000kg/h of the clean-washed rice processing system, that of the system was designed as 1,400kg/h which was based on the safety factor of 40% and handling capability of mass variations occurred during processing. 2. It was analyzed that the proper time required for aqueous cleaning process should be within one minute. 2. It was analyzed that the proper time required for aqueous cleaning process should be within one minute. 3. The final moisture content of clean-washed rice was controlled being 15%(w.b.) for the sake of safe storage. 4. It was proven that the optimum drying time was three minutes for the clean-washed rice dried by a rotary dryer.

• KIEAE Journal
• /
• v.13 no.4
• /
• pp.63-68
• /
• 2013

On the electricity consumption in Korea, the lighting sector takes about 17% of annual total electricity consumptions. In the midst of higher interests on energy conservation measures, design and choice of energy-saving lighting fixtures have been more important. With growth of technology-intensive industries like advanced material, semiconductor, and biotechnology from the 1980s, needs for clean room and thus illumination at clean rooms have been increased. In this paper, development, specification, and features of a Teardrop LED(hereinafter TD LED) lighting fixture as replacement of Teardrop florescent lighting one that has been popularly installed at clean rooms were presented. Also we performed the economic analysis of return on investment(ROI) about energy savings by the installation of the TD LED lighting fixture at a new-built clean room. The economic analysis showed that the new-developed TD LED lighting fixture would be able to withdraw the initial installation cost within 4 years. Lastly, improvement directions and development plans of the next TD LED lighting fixture for wider applications at clean rooms were described.

• Journal of Environmental Science International
• /
• v.25 no.11
• /
• pp.1589-1595
• /
• 2016

From December 2014 to November 2015, an automatic weather system (AWS) was installed over a wide road of Daegu to continuously measure meteorological factors and surface temperature. We investigated the effective operating period of the clean-road system using the daily maximum and minimum air and asphalt surface temperatures, with the aim of creating an optimum thermal environment. The clean-road system was installed over a part of the broad way of Dalgubul(Dalgubul-Daero) by Daegu Metropolitan City in 2011. Until now, the clean-road system has been operated from the middle of April to the end of September. We assumed that it was desirable that the clean-road system could be operated when the discomfort index was above 55. In conformity with the conditions, we concluded that the optimum operation period of the clean-road system is from the end of March to about the middle of October.

• STI Policy Review
• /
• v.1 no.3
• /
• pp.1-15
• /
• 2010

This paper makes the case that a new policy strategy to enhance a global green recovery is needed urgently. The new strategy requires two essential elements. First, G20 economies should follow the lead of South Korea and China and turn their green stimulus investments into a serious long-term commitment, and to support these investments, they should adopt environmental pricing policies and instigate pricing and regulatory reforms to reduce carbon dependency. Second, the G20 also needs to target and coordinate assistance to developing economies in science, technology and innovation (STI) for clean energy. Such assistance is essential to help developing economies to overcome the skills, technological and capital gap that they face in clean energy technologies over the long term. Reform of the Clean Development Mechanism (CDM) is also necessary to establish a long-term global price signal for carbon, and to increase the coverage of developing economies, the sectors and technologies and the overall financing of clean energy projects. Formulating such a policy strategy should appeal to both the Asian-Pacific and Western economies comprising the G20, and by working together to formulate such a strategy, the G20 could lead the way toward a new era of global economic management and STI cooperation in clean energy.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1306-1311
• /
• 2009

In recent semiconductor manufacturing clean rooms, in order to improve clean room air quality, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from the outdoor air introduced into clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is therefore useful for reducing the outdoor air conditioning load for a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to reheat the outdoor air. In the present study, numerical analysis and experiment was conducted to simulate the amount of energy reduction of exhaust air heat recovery type air washer system. The present numerical results showed good agreement with the results of the experimental data.