• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.463-471
• /
• 2016

A shear strength model for the high-shear ring anchor consisting of a steel ring and a rod was developed based on the shear tests on single high-shear ring anchors. The shear strength was found to be proportional to $f_{ck}{^{0.75}}$ which is a similar characteristic to the strength of shear connectors used in composite structures. The effects of the compressive strength of concrete, edge distance, and embedment length of rod are included in the proposed model. Comparison with 22 tests shows that the average and the coefficient of variation of test-to-prediction ratios are 1.01 and 7.57%, respectively. Push tests on the specimens having four high-shear ring anchors at each face were conducted and the measured shear strengths were compared with the predictions by the proposed model. For the specimen with an edge distance of 100 mm, a splitting failure occurred and for the specimens with an edge distance of 150 mm, a failure mode mixed with splitting and bearing occurred, which were very similar to the failures of shear tests on single high-shear ring anchors. In case of a splitting failure, the overlap of failure surfaces could be prevented by providing the longitudinal spacing of 400 mm which is four times of the edge distance. In case of a bearing failure, the failure area is less than 150 mm from the center of the anchor and therefore the overlap of failure surfaces could be prevented by providing the longitudinal spacing of 200 mm. The average of the test-to-prediction ratios of Push tests is 98%, which means that the proposed mode can be applied to predict the shear strength of the multiple high-shear rings.

• Korean Journal of Poultry Science
• /
• v.43 no.3
• /
• pp.149-157
• /
• 2016

This study was performed to investigate the effects of the stocking density (standard stocking density (SSD, $495cm^2/bird$)) vs. high stocking density (HSD,245cm2/bird) and challenge with lipopolysaccharide (LPS, 5mg/kg BW) on the stress-related physiological indicators in chicks. There was a significant (p<0.05) decrease in body weight, but not in the weight of immune organs, between the SSD and HSD groups. The LPS group resulted in a significant (p<0.05) increase in the weights of the thymus and bursa of fabricius compared with the SSD group. Plasma biochemical components, including aspartate transaminase (AST), alanine transaminase (ALT), blood urea nitrogen, Ca, P, creatine kinase and uric acid, markedly (p<0.05) increased in the LPS birds, although no difference in these parameters was observed between the SSD and HSD birds. Furthermore, the birds challenged with LPS showed a significant (p<0.05) increase in the plasma corticosterone level, although this hormone did not differ between the SSD and HSD groups. In the mRNA expression of pro-inflammatory cytokines, hepatic $IL-1{\beta}$, IL-6 and iNOS in the LPS group significantly (p<0.05) increased compared with those in the SSD group. Thymic mRNA expression of $IL-1{\beta}$, IL-6 and IL-18 in the LPS group also significantly (p<0.05) increased compared with those in the other groups. In addition, mRNA expression of $IL-1{\beta}$ in the bursa of fabricius of the LPS group increased (p<0.05) without affecting the other cytokines. Under high stocking density, thymic $IL-1{\beta}$ was the only cytokine that was up-regulated compared with the SSD group. In conclusion, an acute stress induced by LPS challenge profoundly affected immune organ weight, blood biochemical profiles and pro-inflammatory cytokine expression, while chronic stress did not markedly affect biochemical and immunological parameters, suggesting that chicks under high stocking density could be adapted to prolonged stressors.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.311-318
• /
• 2005

Transparency on the Total System Performance Assessment (TSPA) is the key issue to enhance the public acceptance for a permanent high level radioactive repository. To approve it, all performances on TSPA through Quality Assurance is necessary. The integrated Cyber R&D Platform is developed by KAERI using the T2R3 principles applicable for five major steps in R&D's. The proposed system is implemented in the web-based system so that all participants in TSPA are able to access the system. It is composed of FEAS (FEp to Assessment through Scenario development) showing systematic approach from the FEPs to Assessment methods flow chart, PAID (Performance Assessment Input Databases) showing PA(Performance Assessment) input data set in web based system and QA system receding those data. All information is integrated into Cyber R&D Platform so that every data in the system can be checked whenever necessary. For more user-friendly system, system upgrade included input data & documentation package is under development. Throughout the next phase R&D, Cyber R&D Platform will be connected with the assessment tool for TSPA so that it will be expected to search the whole information in one unified system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.303-310
• /
• 2023

The current study was conducted to compare the effect of crossbred on the body weight and laying performance of Korean native chicken from hatch to week 40. A total of 873 one-day-old chicks were divided into twelve crossbreds (i.e., CFCK, CFYC, CFYD, CKCF, CKYC, CKYD, YCYD, YCCF, YCCK, YDCF, YDCK, and YDYC) and commercial layer (Hy-Line Brown) were obtained as a counterpart in the study. All the birds are raised in battery cages (76 × 61 × 46 cm³) and then raised until 14 weeks and subsequently moved to layer battery cages (60 × 25 × 45 cm³) and raised until 16 weeks. The body weight and viability were measured biweekly from hatching to week 16. The week of 16, body weight range was about 1,010.24 to 1,411.77 g. The body weight of specific crossbreeds (i.e., CKCF, YCYD, and YDYC) was found to be comparable to that of Hy-Line Brown). The viability hatch to week 14 range was about 55 to 100% and however week 14 to 16 range was 80 to 100%. The crossbred (i.e., CKCF) recorded superior (P<0.05) viability throughout the whole experiment period, even compared with Hy-Line Brown (100% vs 96%). Our results are indicating that crossbreds Korean native chicken including CKCF, and YDYC has the potential to enhance key features of laying hens during the growing phase like optimal body weight and higher viability.

• Korean Journal of Poultry Science
• /
• v.51 no.2
• /
• pp.83-95
• /
• 2024

This study aimed to assess the performance of laying hens across twelve crossbreed strains (i.e., CFCK, CFYC, CFYD, CKCF, CKYC, CKYD, YCYD, YCCF, YCCK, YDCF, YDCK, and YDYC) of Korean native chicken (KNC) and compare them with Hy-Line Brown layers. A total of 287 18-week-old laying hens were placed in battery cages by strains (2-5 birds per pen). Results indicated that the YCYD and YDYC strains exhibited numerically heavier body weights than Hy-Line Brown at week 18-64. CKYC and YDYC strains demonstrated more than 94% viability by week 64. The CFYC strain had an age of first egg laying of 127 days, and the YDCF strain reached an age of 50% egg production at 140 days, both earlier than their parent stock. The YDCF strain showed over 70% egg production for up to 60 weeks. Regarding egg quality, the CKCF and YCCF strains had numerically higher egg weights among the KNC groups at week 24-64, with the YDYC strain showing a darker (P<0.05) eggshell color compared to CKCF at week 40. Moreover, KNC crossbreeds showed a higher (P<0.05) egg yolk ratio than Hy-Line Brown. In conclusion, the YDCF and YCCF crossbreeds exhibited the most desirable new synthetic Korean native commercial layer based on egg production and quality parameters. Therefore, these strains could be a viable substitute for Hy-Line Brown layers.

• Reproductive and Developmental Biology
• /
• v.29 no.3
• /
• pp.163-168
• /
• 2005

The aim of this study was to investigate the changes in insulin-like growth factor-I (IGF-I) and growth hormone (GH) in serum, the quantitation of spermato-genesis and the comparable relationships among these measurements during pubertal period in New Zealand White male rabbits. To investigate the age-related testicular changes in DNA contents of spermatogenic cells, the fine-needle testicular biopsies from males aged 10 to 28 wks were evaluated by flow cytometry(FCM). Body weight increased significantly between the ages of 12 and 20 wks (P<0.05) and reached 3.4 kg at 28 wks of age. The highest serum IGF-I level (451.3ng/mL) was observed at 20wks of age (P<0.05) and thereafter remained stable at low levels. Serum GH level at 18 wks of age was 183.3 pg/mL which was significantly higher compared to the other ages (P<0.05), and the rising time in serum GH tend to be somewhat earlier than that of IGF-I. The relative percentage of It-cells in testicular cell compartments was $48.2\%$ at the age of 18 wks which significantly increased than those of 16-wk-old (P<0.05) and thereafter increased with the advance of age to $68\%$. The percentage of 2C-cells in testis was $26.8\%$ at 18 wks of age which was significantly lower than $54.3\%$ at 16 wks old (P<0.05). The percentage of 4C-cells was constantly maintained $2\~6\%$ except the $9.9\%$ at 18 wks of age. In conclusion, the results suggest that the puberty onset occurred at about the 18 wks of age and that the IGF-I and GH in serum during the pubertal period showed the age/growth-specific changes and these changes might be related to the spermatogenesis. The DNA FCM combined with fine-needle testicular biopsy could offer a very sensitive method to monitor the quantitative spermatogenic events related to the puberty onset.