• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.39-40
• /
• 1996

Using the Keck 10 m telescope data with the HIRES spectrograph, we analyzed the evolution of Lyman$\alpha$ forest clouds at z > 2 down to the HI column density $10^{12.8}cm^{-2}$. The number density per unit column density does not change with redshifts at lower HI cloumn density ($N_{HI} < 10^{14}cm^{-2}$), while the forest clouds at higher column density disappear rapidly. The cutoff b value, the thermal temperature indicator, increases as redshift decreases. The correlation strength seems to be stronger as redshift decreases.

• Journal of Powder Materials
• /
• v.18 no.6
• /
• pp.575-582
• /
• 2011

MAO(Micro-Arc Oxidation) method was used to make $Al_2O_3$ surface on 6063 Al specimen. This study was focused on an influence of voltage, density of electrolyte and a period of treatment on the change of surface microstructure by using SEM(Scanning Electron Microscope), EDS(Energy Dispersive X-ray Spectroscopy). The microstructure shows higher roughness and thicker oxidized layer with increase of voltage and maintaining period of treatment. The density of electrolyte affected a formation of more dense surface and increase of a oxidized layer.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.265-273
• /
• 2000

Purpose : The aim of this study was to evaluate the bone mineral density of iliac and tibial bone which are frequently selected as autogenic bone graft donor sites, and to evaluate the efficiency of this method as a guideline for the selection of bone graft donor site. Materials and Methods : In this study 61 male and 70 female volunteers at Chungbuk National University Hospital were involved between Jan. 1998 to Sept. 1999. We measured bone mineral density of the iliac and the tibial bone using dual energy X-ray absorptiometry. We evaluated the data using the SAS system for Windows and bone mineral density of the lumbar was used for control. Results : Age showed the highest correlation in correlation matrix between physical and bone variables. Height and weight showed lower correlation of linear increment. In man, the change of bone density according to age demonstrated linear decrease irrespective of the lumbar, ilium, and tibia. In woman, the change of bone density according to age showed cubic form, which increased in the third and forth decade. So it had a peak bone mass on about 35 year-old, thereafter, the change of bone density slowly decreased until 50 year-old, but it rapidly decreased after 50 year-old and it slowly decreased again after 65 year-old. Both in all subjects and subject with osteoporosis, the change of bone mineral density according to age showed statistically significant decrease in lumbar and tibia, but ilium was irrespective. Conclusion : In patients of aged or with osteoporosis, ilium demonstrated less tendency of decrease in bone mineral density than tibia. So this preliminary study suggested that ilium seemed better donor site for autogenic bone graft than tibia.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.102-105
• /
• 2006

Forest canopy density is an essentially important for maintaining the diversify flora and fauna in the tropic. But, the natural and human disturbances have an influence over the inconsistency of forest canopy density. So, forest canopy density (FCD) has been threatened in the tropic since a decade. The objective of this study was to examine the dynamics change of the forest canopy density in tropical forest Chitwan, Nepal combine with field survey and remote sensing data. The field survey data of 2001 such as canopy cover percentage, dbh so on and some human disturbances were used. Similarly, Landsat TM 1988 and ETM+ 2001 have also used to predict the dynamic changes of the FCD over the period. Moreover, nonparametric Kruskal- Wallis test has performed for the validation of the results. Data analysis revealed that very few factors i.e. the number of trees, path, and fire had realized statistically significance at P=<0.05. Therefore we concluded that detail analysis could be needed incorporate with additional socioeconomic, climatic, biophysical and institutional factors for the better understanding of the forest canopy dynamic in particular location.

• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.59-62
• /
• 2011

Purpose : This study was performed to evaluate the changes of jaw bone density around the dental implant after placement using computed tomography scan (CT-Scan). Materials and Methods : This retrospective study consisted of 30 patients who had lost 1 posterior tooth in maxilla or mandible and installed dental implant. The patients took CT-Scan before and after implant placement. Hounsfield Unit (HU) was measured around the implants and evaluated the difference of HU before and after implant installation. Results : The mean HU of jaw bone was 542.436 HU and 764.9 HU before and after implant placement, respectively (p<0.05). The means HUs for male were 632.3 HU and 932.2 HU and those for female 478.2 HU and 645.5 HU before and after implant placement, respectively (p<0.05). Also, the jaw bone with lower density needed longer period for implant procedure and the increased change of HU of jaw bone was less in the cases which needed longer period for osseointegration. Conclusion : CT-Scan could be used to assess the change of bone density around dental implants. Bone density around dental implant was increased after placement. The increased rate of bone density could be determined by the quality of jaw bone before implant placement.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.217-226
• /
• 2001

This study estimated the impacts of the building permit area change on the forest products import quantities in Korea. The first objective of this dissertation is to analyze whether there is any causal relationship between change in the building permit area and changes in the import quantities of forest products in Korea. Assuming that there is any causal relationship, the second objective is to evaluate the dynamics of the impacts of the building permit area change on the forest products import quantities in Korea. The relationship between the building permit area and the import quantity was represented by bivariate vector autoregressive or vector error correction model. Whether there is any causal relationship between change in the building permit area and changes in the import quantities of forest products was analyzed by the causality test of Granger. And the dynamics of the impacts of the building permit area change on the forest products import quantities were evaluated by variance decomposition analysis and impulse response analysis. The import quantity of forest products can be explained by the lagged building permit area variables and the lagged import quantity variables in Korea. Change in the building permit area causes change in the high-density fiberboard import quantity in Korea. In the bivariate model of the high-density fiberboard import quantity, after six months, the building permit area change accounts for about ten percent of variation in the import quantity, and its own change accounts for about ninety percent of variation in the import quantity. On the other hand, the impact of a shock to the building permit area is significant for about six months on the import quantity of high-density fiberboard in Korea. That is, if the building permit area change indeed had an impact on the import quantity of high-density fiberboard in Korea, it was only of a short-term nature.

• Communications for Statistical Applications and Methods
• /
• v.18 no.2
• /
• pp.245-255
• /
• 2011

There are two nonparametric methods that use empirical distribution functions and probability density estimators for the test of the distribution change of data. In this paper we investigate the two methods precisely and summarize the results of previous research. We assume several probability models to make a simulation study of the change point analysis and to examine the finite sample behavior of the two methods. Empirical powers are compared to verify which is better for each model.

• Atmosphere
• /
• v.19 no.2
• /
• pp.199-211
• /
• 2009

In this paper, we examine the multiple change-point and change pattern in the 54 years (1954-2007) time series of the annual and the heavy precipitation characteristics (amount, days and intensity) averaged over South Korea. A Bayesian approach is used for detecting of mean and/or variance changes in a sequence of independent univariate normal observations. Using non-informative priors for the parameters, the Bayesian model selection is performed by the posterior probability through the intrinsic Bayes factor of Berger and Pericchi (1996). To investigate the significance of the changes in the precipitation characteristics between before and after the change-point, the posterior probability and 90% highest posterior density credible intervals are examined. The results showed that no significant changes have occurred in the annual precipitation characteristics (amount, days and intensity) and the heavy precipitation intensity. On the other hand, a statistically significant single change has occurred around 1996 or 1997 in the heavy precipitation days and amount. The heavy precipitation amount and days have increased after the change-point but no changes in the variances.

• Journal of Korea Water Resources Association
• /
• v.56 no.1
• /
• pp.23-34
• /
• 2023

This study analyzed the bed load transport and channel change on the vegetation zone through laboratory experiments and numerical simulations. To examine the effect of vegetation zone in the laboratory experiment, artificial vegetation zones made of acrylic sticks were installed in the experimental channel, and discharge conditions were adjusted to examine the bed load transport and channel change in the vegetation zone. Next, numerical simulations were performed by applying the same conditions as those of the laboratory experiment to the Nays2D model, a two-dimensional numerical model, and the applicability of the numerical model was examined by comparing the results with the results of the laboratory experiment. Finally, by applying a numerical model, the bed load transport and channel change according to the change in vegetation density were examined. As a result of examining the bed load transport and channel change in the vegetation zone according to the discharge condition change by applying the laboratory experiment and the numerical model, the results of the two application methods were similar. As the discharge increased, bed load from the upper stream was deposited inside the vegetation zone. On the other hand, on the other side of the vegetation zone, the flow was concentrated and erosion occurred. Also, the range of erosion increased in the downstream direction. As a result of examining the bed load transport and channel change according to the change in vegetation density, as the vegetation density increased, the bed load from the upper stream was deposited inside the vegetation zone. On the other hand, due to the increase in vegetation density, the flow was concentrated to the opposite side of the vegetation zone, erosion occurred.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.195.1-195.1
• /
• 2016

Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.