• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.1-4
• /
• 1998

Segmented Polyurethanes Elastomers are a class of polymers having interesting properties which arise from their unique phase-separated structures resulting from the thermodynamic incompatibility of the ingredients[1]. Segmented polyurethane Elastomer generally consists of a segment derived from a polymeric diol and a hard segment from a diisocyanate and a low molecular weight diol(chain extender).(omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.465-467
• /
• 1996

A series of thermoplastic polyurethane copolymers were prepared from polypropyleneglycol(PPG, MW 3000), 1,4-butanediol, Isophorone diisocyanate(IPDI) and dibutyltin dilaurate(BBT) as catalyst. Studies have been made on the effects of molar ratio of isocyanate /polyol/chain extender on the properties such as tensile and thermal properties. By varying the ration of hard to soft segments, TPU ranging from soft elastomeric polymer to relatively hard elastoplastics and be obtained. The storage modulus and glass transition temperature of TPU increased with increasing the hard segment content.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2002

Polyurethane NCO prepolymers were synthesized with the polyols such as PTMG, GP and the isocyanate such as TDI at $40^{\circ}C$ for 8.5 minutes. As average molecular weights (${\bar{M_n}}$: 1000, 2000, 3000, 4000) of PTMG, and GP were decreased from 4000 to 1000, ratio of oil gelation increased from 298%, to 440%, for Bunker B. When oil and water were emulsified, the ratio of gelation was increased approximately two times. Ratio of gelation for emulsive Bunker B was increased from 402% to 910%, for PTMG1000 and increased from 440%, W 958% for GPI1000. Ratio of oil gelation for emulsive Bunk C which has higher viscosity than Bunker B was measured w 923% for PTMG1000 made with chain extender, i.e. EG, and measured to 1098% for GP1000. The gel made from GP which has three functional group showed soft and strong characteristic, as a result, it can be removed easily from oil spilled ocean.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.190-194
• /
• 2013

In this study, sebacic acid made from castor oil was used as monomer with isophthalic acid and glycols for polyester polyol synthesis. Polyurethane adhesive was synthesized from the various polyester polyol. From the result of adhesion strength test, polyester polyol made from sebacic acid showed better adhesive force than that of adipic acid due to higher cohesive energy. Branched glycol containing methyl group represented better adhesion than linear glycol. In the chain extender, adhesion strength increased going from PG, EG, BD. From the measurement of TGA, BD showed the best heat stability, and followed by PG, EG. Glass transition temperature increased in the order PG, EG, BD by the result of DMA.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.114-118
• /
• 2003

The prepolymer and the final polyurethane (PU) block copolymer were synthesized by reacting 4,4-methylene bis(phenylisocyanate) with poly(tetramethylene glycol) and the prepolymer with 1,4-butanediol as a chain extender, respectively, to investigate the relation between phase separation and it's resulting properties. According to FT-IR data, the phase separation of hard and soft segments in the prepolymer and the PU block copolymer grew bigger by increasing the hard segment content, and the PU showed more dominant phase separation than the prepolymer. The heat of fusion due to soft segments decreased in both the prepolymer and the PU by increasing the hard segment content, whereas the heat of fusion due to hard segments increased in the PU did not appear in the prepolymers. The breaking stress and modulus of the prepolymer increased by increasing the hard segment content, and the elongation at break decreased gradually, and the PU showed the highest breaking stress and modulus at 58% hard segment content. However, the best shape recovery of the PU was obtained at 47% hard segment content due to the existence of proper interaction among the hard segments for shape memory effect. Consequently, the mechanical properties and shape memory effect of the PU were influenced by the degree of phase separation, depending on the incorporation of chain extender as well as the hard segment content.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.711-718
• /
• 2014

In this paper, the mechanical property change was investigated by adding 1,4-butanediol as chain extender of polyurethane dispersion for leather coating. Reagents for the synthesis were polypropylene glycol(PPG), isoporon diisocyanate(IPDI), dimethylolpropionic acid(DMPA) and 1,4-BD. All samples showed good solvent resistance and flexibility by different content of the 1,4-BD. As results, samples which contains a lot of 1,4-BD showed good properties whth strength of $1.80kg_f/mm^2$ and abrasion test measurement of 49.54 mg.loss. According to elongation test, the sample which contains low amount of 1,4-BD was good property as 364 %.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.171-175
• /
• 2011

Isophorone diisocyanate(IPDI), polytetramethylene glycol 1000 (PTMG1000), and N-methyl diethanol amine (MDEA) were applied to prepare cationic polyurethane water dispersions (PUD). Various neutralizers and chain extenders were introduced in order to investigate property changes, such as particle size, viscosity, $T_g$, tensile strength, and water swellability, depending on chemical structure of those chemicals. While the PUDs neutralized by acetic acid showed a typical elastomeric behavior, the others used with hydrochloride presented crystalline behavior. Among chain extenders isophorone diamine (IPDA) provided the best mechanical property. The particle size of the PUD neutralized with HCl was smaller than that with acetic acid. It is believed that this is attributed to the size difference of counter ions. The PUD chain-extended with hydrazine had the smallest particle size.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.9-16
• /
• 2002

In the synthesis of water-based polyurethane using self-emulsification process, after being neutralized, polyurethane pre-polymers containing ionic pendant groups are dispersed by simple convective mixing. Preparation of dispersion is followed by chain extension reaction, which is considered as important step for growth of the molecular weight of polyurethane. In this work, pH variations in the aqueous phase were monitored during the chain extension process in the presence of water-soluble diamines. The optimum degree of chain extension and the average particle size in the polyurethane dispersions were examined with varying ionic pendent group contents, type of chain extenders, and feed rate of chain extenders, The initial pH value in the aqueous phase linearly increased and the optimum chain extension point could be obtained from the intersection of two linear lines having different slopes, All average particle sizes before chain extension reaction were almost same, however, the final average particle size increased as feed rates of chain extenders increased, In addition, as the ionic pendant group contents increased, the particle size decreased since the hydrophilicity and hydrodynamic volume increased. As carbon numbers of the chain extenders increased, the final particle size increased significantly. From the results, it was concluded that the chain extension reaction took place among the particles not only in a particle.

• Elastomers and Composites
• /
• v.34 no.5
• /
• pp.399-406
• /
• 1999

Polyurethane (PU) prepolymers were synthesized from polytetramethylene ether glycol (PTMG), 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate (IPDI). After chain extention using dimethyol propionic acid (DMPA), aqueous polyurethane anionomers were prepared from triethyl amine (TEA) as a neutralizer. The effect of the content of chain extender and the degree of neutralization on the state of emulsification, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, Viscometer and DSC.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.177-184
• /
• 1998

Polyurethane(PU) prepolymers were synthesized from polytetramethylene ether glycol(PTMG), with 4,4'-diphenylmethane diisocyanate(MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate(IPDI). After chain extention using n-methyl-diethanol amine(n-MDEA), aqueous polyurethane cationomers were prepared by addition of glycolic acid(GA) as a quaternizer. The effect of the content of chain extender and the degree of neutralization on the stability of emulsion, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, viscometer and DSC.