• 한국표면공학회지
• /
• 제47권3호
• /
• pp.104-108
• /
• 2014

To improve emission efficiency of organic light emitting devices (OLEDs), we fabricated the tandem OLED of ITO / 2-TNATA / NPB / SH-1: 3 vol.% BD-2 / Bphen / Liq / Al / $MoO_x$ (X nm) / 2-TNATA / NPB / SH-1: 3 vol.% BD-2 / Bphen / Liq / Al structure. And emission properties of single OLED and tandem OLED with $MoO_x$ thickness as charge generation layer (CGL) were measured. The current emission efficiency and quantum efficiency of tandem OLED with $MoO_x$ of 3 nm thickness were improved compare with single OLED from 7.46 cd/A and 5.39% to 22.57 cd/A and 11.76%, respectively. In case of thicker or thinner than $MoO_x$ of 3~5 nm, the current emission efficiency and quantum efficiency were decreased, because balance of electron and hole in emission layer was not matching. The driving voltage was increased from 8 V of single OLED to 15 V of tandem OLED by thickness increase of OLED. As a result, it was possible to improve the emission efficiency of OLEDs by optimized $MoO_x$ thickness.

• 한국재료학회지
• /
• 제7권5호
• /
• pp.403-410
• /
• 1997

본 연구는기존의 보고에서 보다 감광화효율을 더욱 향상시키기 위하여 결정형이 다른 전하발생물질 (CGM:Charge Generation Material)과 전하수송물질(CTM:Charge Transport Material)을 사용하여 감광체를 만들었고, 이들의 정전특성을 비교검토하였다. 전하발생물질로서 결정형이 다른 $\alpha$-, $\beta$-, x-형 무금속 프탈로시아닌 (H$_{2}$Pc)을 사용한 결과, x-H$_{2}$Pc를 사용한 감광체의 감도는 E$_{1}$2/의 값이 2.62 $\mu$J/$\textrm{cm}^2$로 가장 두수하게 나타났다. 전하발생층(CGL:Charge Generation Layer)에 첨가되는 CGM-CTM, CGM-CTM-ZnO로 구성된 감광체보다 전하발생층에 전하발생계만으로 구성된 감광체의 경우의 전하유지율 (80%) 및 감도(E$_{1}$2/=2.83$\mu$J/$\textrm{cm}^2$)면에서 우수함을 보여주었다. 한편 binder로서 PVB-co-PVA-co-PVA$_{c}$[poly(viny1 butyral-co-viny1 alcohol-co-viny1 acetate)]를 사용했을 때는, CGM-CTM으로 구성된 감광체보다 CGL에 CGM-CTM으로 구성된 감광체의 경우의 전하유지율(71%) 및 감도(E$_{1}$2/=2.62$\mu$J/$\textrm{cm}^2$)면에서 우수함을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.141-143
• /
• 1993

A nontoxic organic photoreceptor for near infrared light has been developed. A double layered photoreceptor using $\tau$-H$_2$Pc as the CGL was made. The CTL was formed by oxadiazole derivative dispersed in two other host polymers. This photoreceptor has a charge acceptance of -900 V when a corona charge is used, and has residual potentials of -20 V for PC, and -10 V for PVB by light irradiation.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.81-86
• /
• 2010

The mechanisms of selective oxidation of intercritically annealed CMnAl TRIP steels in a Continuous Galvanizing Line (GCL) were studied by cross-sectional observation of the surface and sub-surface regions by means of High Resolution Transmission Electron Microscopy (HR-TEM). The selective oxidation and nitriding of an intercritically annealed CMnAl TRIP steel in a controlled dew point 10%$H_2+N_2$ atmosphere resulted in the formation of c-xMnO.$MnO_2$ (1${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) particles on the steel surface. Single crystal c-xMnO.$SiO_2$ ($2{\leq}x{\leq}4$) oxide particles were also observed on the surface. A thin film of crystalline c-xMnO.$SiO_2$ (2${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) was present between these particles. In the sub-surface region, internal oxidation, nitriding and intermetallic compound formation were observed. In the first region, large crystalline c-xMnO.$SiO_2$ ($1{\geq}x{\geq}2$) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) oxides particles were present. In the second region, c-AlN particles were observed, and in a third region, small $MnAl_x$ (x>1) intermetallic compound particles were observed.

• Journal of Microbiology and Biotechnology
• /
• 제29권1호
• /
• pp.114-126
• /
• 2019

This paper introduces three ways to determine host-guest complexation of cucurbit[7]uril (CB[7]) with homocysteine (Hcy). After preincubating Hcy and cysteine (Cys) with CB[7], Ellman's reagent (DTNB) was used to detect Hcy and Cys. Only Cys reacted with DTNB and Hcy gave a retarded color change. This suggests that the -SH group of Hcy is buried inside CB[7]. Human cystathionine ${\gamma}-lyase$ (hCGL) decreased the level of Hcy degradation after preincubating Hcy and CB[7]. These results suggest that the amount of free Hcy available was decreased by the formation of a Hcy-CB[7] complex. The immunological signal of anti-Hcy monoclonal antibody was decreased significantly by preincubating CB[7] with Hcy. The ELISA results also show that ethanethiol group ($-CH_2CH_2SH$) of Hcy, which is an epitope of anti-Hcy monoclonal antibody, was blocked by the cavity in CB[7]. Overall, CB[7] can act as a host by binding selectively with Hcy, but not Cys. The calculated half-complexation formation concentration of CB[7] was 58.2 nmol using Ellman's protocol, 97.9 nmol using hCGL assay and 87.7 nmol using monoclonal antibody. The differing binding abilities of Hcy and Cys towards the CB[7] host may offer a simple and useful method for determining the Hcy concentration in plasma or serum.

• 한국컴퓨터정보학회논문지
• /
• 제28권5호
• /
• pp.95-102
• /
• 2023

이 연구의 목적은 전방머리자세를 가진 젊은 성인을 대상으로 슬링뉴렉안정화운동이 중재방법이 통증 및 목뼈 앞굽음각, 중력중심선에 어떠한 영향을 미치는지 알아보고자 실시되었다. 연구의 대상자는 슬링뉴렉안정화운동그룹(SNSEG) 10명, 통제그룹(CC) 10명으로 선정하였으며, 8주간 주3회 70분간 실시하였다. 이 연구 결과 슬링뉴렉안정화운동은 통증은 감소(p<.001), 목뼈 앞굽음각은 증가(p<.001)와 중력중심선은 감소에(p<.01) 유의한 효과가 나타났다. 이상의 결과 종합해 보면 슬링뉴렉안정화운동은 속근육(LM)군의 고유수용성감각 개선 및 근활성화에 효과적이며, 대근육(GM)군과 공동활성화하여 앞굽은각과 중력중심선에 개선에 효과적인 것으로 나타났다. 따라서 깊은목굽힘근과 뒤통수밑근의 재활성화는 통증 조절과 자세 정렬에 중요한 요소로 전방머리자세 개선시킬 수 있는 효과적인 중재방법으로 제안한다.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1488-1491
• /
• 1996

Throughout CGL(Continuous Galvanizing Line) in steel works, zinc-coated steel sheets are produced which are used where long-running corrosion resistivity is required. During the galvanizing process, top dross is created and floated on the zinc pot. Because the dross leaves ill patterns on the coated sheets, it is removed manually with shovel-like tools in about twenty minutes. Because, however, the working environment is very noisy, hot and harmful to human workers, a robot system is developed and implemented on a real plant to automatically remove the top dross. It consists of a robot and its carriage system, a pot level sensor, a system controller, and special tools to collect, pick up, and put the top dross into a dross waste basket. A system software is developed to monitor the system status. A series of tests were performed to verify the robot motion and adaptation to working conditions, and proved successful work.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.836-839
• /
• 1996

Throughout CGL (Continuous Galvanizing Line) in steel works, zinc-coated steel sheets are produced which are used where long-running corrosion resistivity is required. During the galvanizing process, top dross is created and floated on the zinc pot. Because the dross leaves ill patterns on the coated sheets, a robot system is developed to automatically collect and remove the top dross. It consists of a robot and its carriage system, a pot level sensor, a system controller, and special robot tools. For the first time the level of zinc pot must be measured and fed back to the robot controller to avoid submersion of the robot hand into the hot zinc pot. In this paper, acoustic distance sensor is tested as a candidate for the pot level sensor in the view point of hot environment. Some considerations on the use of the acoustic distance sensor will be denoted.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.53-60
• /
• 1998

The purpose of this paper is to meausre the electrophotographic characteristics of double-layered organic photoreceptor and to evaluate an application for the laser beam printer drum. The characte carrier generation layer(CGL) of double-layered photoreceptor was fabricated with .tau.-H$_{2}$Pc which has high photosensitivity in the near-infrareed region(thickness is about 0.3.mu.m), and Oxadiazole derivative was chosen as a charge carrier transport layer(CTL) because of its high hole mobility. To observe the electrophotographic characteristics of the photoreceptor, we measured the charge acceptance, dark-decay ratio, residual potential after light irradiation. From the result of this study, proper thickness of CTL was about 10.mu.m. Also it's realized that electrophotographic characteristics of the photoreceptor were depend on the thickness of the CTL and the initial surface potential.