• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.161-164
• /
• 2006

Carbon fiber reinforced polymer(CFRP) strips have superior mechanical and chemical properties in comparison with conventional materials. The purpose of this study is to investigate the mechanical shear behavior of concrete structures strengthened by CFRP strips A total of 15 concrete members were made and tested. Shear span to depth ratio(a/d) and the spacing of CFRP stripswere selected as major test variables. From test results, it isshown that shear strengthening with CFRP strips can increase the first shear strength and ultimate shear strength of concrete members significantly. And the brittle shear failure mode can be changed to a ductile failure mode by CFRP strips.

• Structural Engineering and Mechanics
• /
• 제30권2호
• /
• pp.247-261
• /
• 2008

Performance of shear-deficient reinforced concrete (RC) beams strengthened with carbon fiber-reinforced polymer (CFRP) strips/sheets is analyzed through numerical simulations on four-point bending tests. The numerical simulations are carried out using the finite element (FE) program ABAQUS. A micromechanics-based constitutive model (Liang et al. 2006) is implemented into the FE program ABAQUS to model CFRP strips/sheets. The predicted results are compared with experiment data (Khalifa and Nanni 2002) to assess the accuracy of the proposed FE analysis approach. A series of numerical tests are conducted to investigate the influence of stirrup lay-ups on the shear strengthening performance of the CFRP strips/sheets, to illustrate the influence of the damage parameters on the microcrack density evolution in concrete, and to investigate the shear and flexural strengthening performance of CFRP strips/ sheets. It has been shown that the proposed FE analysis approach is suitable for the performance prediction of RC beams strengthened with CFRP strips/sheets.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.139-146
• /
• 2009

본 연구에서는 외부프리스트레스 탄소섬유판에 의한 보강기술에서 긴장력을 포함하는 지속하중이 작용하였을 때의 장기거동을 평가하기 위한 실험연구를 수행하였다. 지속하중 도입을 위한 실험계획은 탄소섬유판에 직접 인장력을 도입하는 직접 지속하중 방식과 휨 실험체를 통한 휨 지속하중으로 구분하여 실시하였다. 직접 지속하중에 의한 실험은 탄소섬유판의 종류별로 약 700일에 걸쳐 실시하여 탄소섬유판의 장기 크리프/릴렉세이션 등의 변형을 주로 평가하였으며, 휨 지속하중 실험에서는 탄소섬유판의 정착시 정착장치에서의 슬립량을 주로 평가하기 위해 약 90일 간으로 수행되었다. 일방향 탄소섬유판에 대한 2년간의 지속하중 실험 결과에 의하면, 탄소섬유판의 크리프나 릴렉세이션과 같은 재료자체의 변형 및 정착장치에서의 슬립에 기인한 응력손실은 적은 것으로 나타났다. 그러나, 강판매입형 탄소섬유판은 강판의 항복변형률을 초과하여 도입된 긴장력으로 인하여 재료 자체의 변형에 의한 자체 응력손실이 발생되었으므로 이에 대한 보완이 필요한 것으로 판단된다. 아울러, 탄소섬유판의 정착과정에 발생되는 긴장력의 즉시 손실량은 응력도입 초기의 약 10% 정도이므로 프리스트레스의 도입시에는 이를 고려하여 긴장력을 결정할 필요성이 있을 것으로 판단된다.

• Advances in concrete construction
• /
• 제10권2호
• /
• pp.151-159
• /
• 2020

An experimental study on the stress-strain relation of PVC-CFRP confined reinforced concrete columns subjected to eccentric compression was carried out. Two parameters, such as the CFRP strips spacing and eccentricity of axial load, were considered. The experimental results showed that all specimens failed by compressive yield of longitudinal steel bar and rupture of CFRP strips. The bearing capacity of specimen decreases as the eccentricity or the CFRP strips spacing increases. The stress-strain relation of specimens undergoes two stages: parabolic and linear stages. In the parabolic stage, the slope of stress-strain curve decreases gradually as the eccentricity of axial loading increases while the CFRP strips spacing has little effect on the slope of stress-strain curve. For the linear stage, the slope of stress-strain curve decreases as the eccentricity of axial load or the CFRP strips spacing increases. A model for predicting the stress-strain relation of columns under eccentric compression is proposed and it agrees well with various test data.

• Steel and Composite Structures
• /
• 제44권6호
• /
• pp.845-865
• /
• 2022

In this study, the performance of shear deficient reinforced concrete (RC) beams with rectangular cross-sections, which were externally bonded reinforced (EBR) with high strength CFRP and GFRP strips composite along shear spans, has been experimentally and analytically investigated under vertical load. In the study, the minimum CFRP and GFRP strips width over spacing were considered. The shear beam with turned end to a bending beam was investigated by applying different composite strips. Therefore various arising in each of strength, ductility, rigidity, and energy dissipation capacity were obtained. A total of 12 small-scaled experimental programs have been performed. Beam dimensions have been taken as 100×150×1000 mm. Four beams have been tested as unstrengthened samples. This paper focuses on the effect of minimum CFRP and GFRP strip width on behaviours of RC beams shear-strengthened with full-wrapping, U-wrapping, and U-wrapping+longitudinal bonding strips. Strengthened beams showed significant increments for flexural ductility, energy dissipation, and inelastic performance. The full wrapping strips applied against shear failure have increased the load-carrying capacity of samples 53%-63% interval rate. Although full wrapping is the best strengthening choice, the U-wrapping and U-wrapping+longitudinal strips of both CFRP and GFRP bonding increased the shear capacity by 53%~75% compared to the S2 sample. In terms of ductility, the best result has been obtained by the type of strengthening where the S5 beam was completely GFRP wrapped. The experimental results were also compared with the analytically given by ACI440.2R-17, TBEC-2019 and FIB-2001. Especially in U-wrapped beams, the estimation of FIB was determined to be 81%. The estimates of the other codes are far from meeting the experimental results; therefore, essential improvements should be applied to the codes, especially regarding CFRP and GFRP deformation and approaches for longitudinal strip connections. According to the test results, it is suggested that GFRP, which is at least as effective but cheaper than CFRP, may be preferred for strengthening applications.

• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.299-305
• /
• 2008

본 연구는 탄소섬유판으로 보강된 철근콘크리트 부재의 전단거동 특성 및 파괴형상을 구명함에 그 목적이 있다. 이를 위하여 탄소섬유판의 형상, 섬유판 부착 간격 및 전단보강 철근량 등의 변수를 포함하는 실험 연구가 수행되었다. 본 실험 결과 탄소섬유판으로 보강된 철근콘크리트 부재의 전단 강성은 보강되지 않은 보에 비해 현저하게 개선되며 최대 전단강도 증진율은 100% 이상인 것으로 나타났다. 또한 탄소섬유판은 전단균열의 발생 및 진전을 억제하며, 적은 량의 탄소섬유판으로 보강했을 경우에도 전단강도의 증진 효과는 매우 좋은 것으로 나타났다. 본 연구에서는 탄소섬유판에 발생하는 변형률을 기본으로 하여 유효응력을 도출하였으며, 탄소섬유판으로 보강된 철근콘크리트 부재의 전단강도를 계산하였다. 이는 실험 결과와 잘 일치하는 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제6권1호
• /
• pp.49-57
• /
• 2012

The main objectives of this research were to experimentally evaluate the impact of Carbon Fiber-Reinforced Polymers (CFRP) amount and strip spacing on the shear behavior of prestressed concrete (PC) beams and to evaluate the applicability of existing analytical models of Fiber-Reinforced Polymer (FRP) shear capacity to PC beams shear-strengthened with CFRP. The Ushaped CFRP strips with different spacing were applied externally to the test specimens in order to observe the overall behavior of the prestressed concrete I-beams and the mode of failure of the applied CFRP strips. Results obtained from the experimental program showed that the application of CFRP strips to prestressed concrete I-beams did in fact enhance the overall behavior of the specimens. The strengthened specimens responded with an increase in ductility and in shear capacity. However, it should be noted that the CFRP strips were not effective at all at spacing greater than half the effective depth of the specimen and that fracture of the strips was the dominant failure mechanism of CFRP. Further research is needed to confirm the conclusion derived from the experimental program.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.89-96
• /
• 2008

본 연구에서는 탄소섬유판이 표면 매입된 철근 콘크리트 보의 휨 거동 효과를 고찰하였다. 이를 위하여, 탄소섬유판이 표면 매입된 T 형 철근 콘크리트 보를 제작하여 실험을 수행하였다. 본 연구 결과, 표면매입(NSM) 탄소섬유판으로 보강된 철근콘크리트 부재의 휨 강성 및 극한강도는 섬유판으로 보강되지 않은 보에 비하여 크게 증진되며, 그 최대 증가율은 보강되지 않은 부재의 경우보다 약 247%로 나타났다. 위 철근콘크리트 부재의 파괴는 부재 길이 방향으로 섬유 소선이 풀리는 표면매입 탄소 섬유판의 파괴로 시작되며, 탄소섬유판의 파단이 이어지는 2차 파괴가 발생하였다. 표면매입 탄소섬유판은 콘크리트와의 완정한 합성거동을 유도하여 따라서 탄소섬유판을 표면에 매입하는 방식은 노후 구조물 보강방식으로 매우 효과적인 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제64권1호
• /
• pp.135-143
• /
• 2017

To upgrade shear performance of reinforced concrete (RC) beams, and particularly of the segments under negative moment within continuous T-section beams, a series of original schemes has been proposed using carbon fibre-reinforced polymer (CFRP) U-shaped strips for shear-strengthening. The current work focuses on one of them, in which CFRP U-strips are wound around steel bars against the top of the flange of a T-beam and then spliced on its bottom face in addition to being bonded onto its sides. The test results showed that the proposed scheme successfully provided reliable anchorage for U-strips and prevented premature onset of shear failure due to FRP debonding. The governing shear mode of failure changed from peeling of CFRP to its fracture or crushing of concrete. The strengthened specimens displayed an average increase of about 60% in shear capacity over the unstrengthened control one. The specimen with a relatively high ratio and uniform distribution of CFRP reinforcement had a maximum increase of nearly 75% in strength as well as significantly improved ductility. The formulas by various codes or guidelines exhibited different accuracy in estimating FRP contribution to shear resistance of the segments that are subjected to negative moment and strengthened with well-anchored FRP U-strips within continuous T-beams. Further investigation is necessary to find a suitable approach to predicting load-carrying capacity of continuous beams shear strengthened in this way.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.371-386
• /
• 2014

This paper presents a tri-linear restoring force model based on the test results of 12 circular RC columns strengthened by CFRP strips under low cyclic loading. The pre-stress of CFRP strips and axial load ratio of specimens are considered as the affect parameters of the proposed model. All essential characteristics of the hysteretic behavior of the proposed model, including the hysteretic rules, main performance points, strength degradation, stiffness degradation and confinement effects are explicitly analyzed. The calculated results from the proposed model are in good agreement with the experimental results, which shows that the recommended model can be reliably used for seismic behavior predictions of circular RC columns strengthened by pre-stressed CFRP strips.